For the lack of space, we cited mostly review articles, and we apologize to our colleagues whose original work was not cited. The work in the V.C. laboratory is supported by grants from NIH, NSF, USDA/NIFA, BARD, and BSF to V.C., and the S.G.L. laboratory is supported by NIH and funds from the Departments of Plant Pathology and Plant-Microbe Biology to S.G.L.

1. Plant Material
<ol>
	<li>Choice of plant species</li>
	<li>Use the plant species native to the protein of interest, i.e., one which encodes this protein for endogenous proteins or which represents the natural host for the pathogen for viral proteins. In addition, the selected plant species must be amenable to the chosen method of transient genetic transformation. 
	NOTE: The studies routinely employ Nicotiana benthamiana, which represents a good host for TMV and is transformed efficiently by the Agrobacterium-mediated genetic transformation technique, i.e., agroinfiltration (see Step 3). N. benthamiana plants also are easily grown and have large leaves, which are easily inoculated by Agrobacterium and easily analyzed by confocal microscopy.</li>
	<li>Plant growth
	<ol>
		<li>Plant N. benthamiana seeds in wet soil at high density. Keep them in a controlled environment chamber at 20-25 &#730;C under 16 h of light at ~75 &#181;mol photons m-2 s-1 and 8 h of darkness. After the diameter of euphyll reaches 0.5 cm, carefully transfer the seedlings to larger pots and continue growth in the same chamber under the same conditions.</li>
		<li>Maintain the plants until they grow to 4-8-leaf stage within 4 weeks when the biggest leaves are 4-6 cm in diameter; at this time, they can be used for agroinfiltration (see Step 3). 
		NOTE: Importantly, never use the plants if they began to flower because, at this developmental stage, the leaf architecture often varies24,25, sometimes leading to inconsistent results.</li>
	</ol>
	</li>
</ol>
2. Expression Vector Construction
<ol>
	<li>Choice of expression system
	<ol>
		<li>Choose the expression system, i.e., vectors and vector delivery method, best suited for expression of the protein of interest in the plant species studied. 
		NOTE: Occasionally, such specific combinations of tested protein/plant species may require specific vectors and vector delivery method for optimal expression and function of the protein of interest. For most dicotyledonous plants, however, select binary plasmids as expression vectors and agroinfiltration as delivery system.</li>
	</ol>
	</li>
	<li>Protein fluorescent tagging
	<ol>
		<li>Fluorescently tag each expressed protein for analysis of its subcellular distribution22, including Pd localization. 
		NOTE: Employ autofluorescent proteins, such as CFP and DsRed2, as tags. Tag the tested protein with CFP and coexpress it with a free DsRed2. CFP functions both as tag and as a virus-unrelated cargo molecule. DsRed2 functions to calibrate overall efficiency of transient expression and, because it is cell-autonomous, to identify the initially transformed cell; this latter function is important when assessing cell-to-cell movement of potentially non-cell-autonomous tested proteins. For coexpression with the Pd marker PDCB1, which also is cell-autonomous, tag the tested protein with CFP and PDCB1 with DsRed2.</li>
		<li>As a rule of thumb, fuse the autofluorescent tag to the carboxyl-terminus of the expressed protein. However, if the tagged full-length tested protein exhibits compromised Pd targeting, transfer the tag to the amino-terminus of the protein.</li>
		<li>Clone the coding sequences of the proteins to be tested into a suitable plant expression vector. 
		NOTE: There are many different plant expression vectors that allow fluorescent tagging. We use a series of pSAT plasmids26 or some of their derivatives27,28, which are suitable for cloning of the sequence of interest directly in frame with the suggested autofluorescent tags (see Step 2.2.1) in both amino- and carboxyl-terminal orientations.</li>
		<li>Transfer each expression cassette into an Agrobacterium binary vector. 
		NOTE: Although pSAT-based constructs are suitable for direct biolistic delivery into plant tissues, agroinfiltration, which is the transformation method recommended here (see Step 3), requires that the expression cassette to be located between the T-DNA borders of a binary vector29. 
		NOTE: All pSAT vectors are designed to allow such transfer to the pPZP-RCS2 multigene expression binary vector26,30 by a single-step cloning using rare cutting nucleases AscI, I-PpoI, I-SceI, I-CeuI, PI-PspI and PI-TliI26. Researchers who prefer to utilize recombinatorial cloning, e.g., using heterologous lox sites31, can employ pSAT vector variants26,27.</li>
		<li>For coexpression, transfer both expression cassettes, e.g., tested protein-CFP and DsRed2 or tested protein-CFP and PDCB1-DsRed2 (see Step 2.1), to the same pPZP-RCS2 binary vector. 
		NOTE: Alternatively, Agrobacterium cultures harboring individual binary constructs can be mixed together for infiltration into N. benthamiana (see Step 3.1).</li>
	</ol>
	</li>
</ol>
3. Agroinfiltration
<ol>
	<li>Add 1 &#181;g of a pPZP-RCS2-based plasmid from Step 2.2.5 to 100 &#181;L culture of competent cells of Agrobacterium tumefaciens strain EHA105 or GV3101 prepared as described32, incubate on ice for 30 min, flash-freeze in liquid nitrogen for 1 min, and incubate at 28 &#176;C for 15 min.
	<ol>
		<li>Then, add 1 mL of LB medium (10 g/L tryptone, 5 g/L yeast extract, and 10 g/L NaCl) to the competent cell mixture and incubate at 28 &#176;C for 2 h. Spin down the cells at 3,000 &#215; g for 1 min, re-suspend them in 0.2 mL of LB, and plate them on LB agar supplemented with appropriate antibiotics (e.g., 100 mg/L spectinomycin and 50 mg/L rifampicin for pPZP-RSC2-based vectors26,30). Grow at 28 &#176;C for 48 h until individual colonies are visible.</li>
	</ol>
	</li>
	<li>Pick and plate several individual colonies onto a fresh LB agar plate (see Step 3.1), grow at 28 &#176;C for 48 h, and take a small amount of bacteria for analysis by colony PCR33 to confirm the presence of the specific binary constructs.</li>
	<li>Grow each Agrobacterium colony with the construct of interest overnight at 28 &#176;C in 5 mL of LB medium supplemented with appropriate antibiotics (see Step 3.1.1). Centrifuge the cells at 3,000 &#215; g, and re-suspend them to OD600=0.5 in agroinfiltration buffer (10 mM MgCl2, 10 mM MES (pH 5.6), 150 &#181;M acetosyringone). Incubate for 2 h at room temperature.
	<ol>
		<li>If using a mixture of binary plasmids rather than a single multigene expression plasmid for protein coexpression, mix the corresponding cell cultures at 1:1 v/v ratio before infiltration. Then incubate the cells at 28 &#176;C for 2 h.</li>
	</ol>
	</li>
	<li>Load the inoculum into a 1 mL plastic syringe and press the nozzle of the syringe (no needle) against the lower (abaxial) epidermis of the fully mature N. benthamiana leaves. Hold the leaf with a gloved finger on the adaxial face34,35.
	<ol>
		<li>Introduce the Agrobacterium in infiltration medium by slow injection. For statistical significance, infiltrate several leaves on each plant. 
		NOTE: Note that the oldest leaves are not used as they do not yield consistent expression levels.</li>
		<li>Inoculate all leaves in situ. Maintain the infiltrated plant until observation as described in Step 1.2 .</li>
	</ol>
	</li>
</ol>
4. Confocal Microscopy
<ol>
	<li>Use a blade to cut each leaf into fragments between the veins 24-48 h after the infiltration, (depending on the efficiency of transient expression of the specific tested protein); the size of each tissue slice should be such that the slice is completely covered by the cover glass (22 mm x 40 mm) used for microscopy.</li>
	<li>Place the leaf slices on the object slide with the abaxial leaf surface facing up, place a drop of water on the leaf slice and cover it with the cover glass. Immobilize the cover glass with small pieces of tape on each side.</li>
	<li>Observe the agroinfiltrated tissues under a laser scanning confocal microscope and record the resulting images.
	<ol>
		<li>First, use a 10X objective lens to identify cells with the signal, and then use 63x objective lens for more detailed observations.</li>
		<li>Use the 458 nm wavelength from an argon ion laser to excite CFP, and 543 nm to excite DsRed2. Retain all settings for image acquisition, i.e., laser intensity and photomultiplier tube (PMT) settings, between experiments. On average, examine 100-120 cells for each experimental condition.</li>
	</ol>
	</li>
</ol>
5. Identification of PLS
<ol>
	<li>Diagnose the localization of the tested protein using confocal microscope (section 4). Check if the tested protein has the characteristic peripheral punctate pattern25,36,37,38,39,40,41 and colocalizes with the Pd marker PDCB123. This indicates that the tested protein most likely contains PLS sequences.</li>
	<li>After confirmation of the PLS activity of tested protein, progressively subdivide its open reading frame (ORF) (genbank accession number BAF93925.1) into smaller fragments, autofluorescently, (e.g., CFP,) tag each of them, and analyze their subcellular localization as described in Step 4. Initially, the size of 100 amino acid residues for each subdivided fragment is recommended.</li>
	<li>Further subdivide the truncated fragments which have the PLS activity and check their subcellular localization as described in Step 4 until the smallest fragment that still localizes to Pd, i.e. is sufficient to transport the autofluorescent tag cargo to Pd, is identified. This fragment is presumed to represent the PLS sequence.</li>
	<li>Delete the putative PLS from the full-length tested protein, i.e. fuse the remaining part of the test protein without putative PLS to autofluorescent tag, and determine the subcellular localization of the resulting mutant protein as described in Step 4. If this mutant protein that lacks the putative PLS fails to localize to Pd, this will indicate that the identified PLS is not only sufficient (see Step 5.3), but also necessary for the Pd transport of the tested protein.</li>
	<li>Agroinfiltrate the leaves with a mixture of Agrobacterium cultures harboring the expression construct for the CFP-tagged PLS and free DsRed2 (see Step 3.3). Observe infiltrated tissue using confocal microscope with objective lens of 10x using the same settings as in Step 4.3.</li>
	<li>Score cells that contain both CFP and DsRed2 signals as initially infiltrated cells, and score the adjacent cells that contained only the CFP signal as those that exhibit movement. 
	NOTE: This step examines the identified PLS for its potential cell-to-cell movement ability; this is because many proteins that target Pd (including most plant viral MPs) also move through Pd to the neighboring cells. The concentration of Agrobacterium used for infiltration depends on the expression efficiency of different structures respectively. For agroinfiltration, make sure to use the cell culture dilution that ensures (i) transformation of single cells, leaving the adjacent cells untransformed, (ii) achieves similar efficiency of expression. For example, our experiments utilize OD600 of 0.01 and 0.005 for expression of CFP-tagged PLS and free DsRed2, respectively.</li>
</ol>
6. Identification of Key PLS Residues using Alanine Scanning42
<ol>
	<li>Use standard PCR protocols to amplify the PLS coding sequence employing a pair of primers designed to contain the desired mutation, i.e., substitution of the target amino acid residue with alanine, around the central region of each primer as described21. Carry out primer design and use the site-directed mutagenesis kit for site-directed mutagenesis according to the manufacturer&#39;s instructions.</li>
	<li>Purify the resulting PCR products using any standard DNA purification kit, and digest them at 37 &#176;C with DpnI to eliminate the parental (i.e., non-mutated) methylated and hemimethylated DNA. Cool this down for 5 min at room temperature (not on ice). Then transform the mixture directly into E. coli competent cells43, and identify colonies with the desired mutant constructs as described in Step 3.2.</li>
	<li>Introduce the mutant constructs into the binary vector as described in Step 2.2.4, perform agroinfiltration as described in Step 3, and assess Pd targeting as described in Steps 4 and 5.1.</li>
</ol>

No conflicts of interest declared.

This protocol has four core constituents: the concept of identifying a sequence that is both necessary and sufficient for targeting to Pd, systematic division of the protein of interest into fragments that are progressively reduced in length, fusing the tested fragments to an autofluorescent protein that serves both as tag and as macromolecular cargo, and functional assay for Pd targeting in living plant tissues following transient expression of the tested fusion proteins. Note that Agrobacterium-mediated transient expre...

Plasmodesmata (Pd) function as conduits for intercellular transport of key regulators of plant development and morphogenesis, ranging from transcription factors to mRNA and small RNA molecules. Furthermore, this macromolecular transport capacity of Pd is utilized by most plant viruses for their intercellular spread during infection; to move through Pd, plant viruses have evolved specialized proteins, termed movement proteins (MPs), that specifically target to Pd1,2,3,4,5,6,7. Molecular pathways of Pd transport most likely are intimately interconnected with the specific sequences that target the transported proteins into these pathways. Thus, identification of these Pd localization signals (PLSs) may be diagnostic of the corresponding Pd transport pathway. This is by analogy of Pd transport8, for example, to different nuclear import pathways, which can be specific for different nuclear localization signal (NLS) sequences9,10. Conceptually, both NLSs and PLSs represent non-cleavable subcellular targeting sequences that are necessary and sufficient for targeting. However, unlike NLSs11, the sequence information about PLSs is severely limited. Specifically, only four protein sequences involved in Pd targeting have been reported, with all of them derived from endogenous plant proteins. The first one is represented by a homeobox domain of KN112 &#8211; a transcription factor that moves from inner cell layers to epidermis of the plant leaf13 &#8211; and its KNOX homologs14. The second one also is from a transcription factor, Dof, which contains a putative PLS described as the intercellular trafficking (IT) motif15. The third sequence is from the PDLP1 plasmodesmata-resident type 1 membrane protein, and it is represented by a transmembrane domain16. Finally, the fourth Pd targeting sequence was recently reported for glycosylphosphatidylinositol (GPI)-anchored proteins and it is represented by the glycosylphosphatidylinositol (GPI) modification signal17.
Interestingly, until very recently, no PLSs have been reported for viral MPs. Previous studies indicated the presence of putative PLS sequences in plant viral MPs18,19, but no true PLS, i.e., a minimal amino acid sequence both necessary and sufficient for Pd targeting of an unrelated cargo molecule (e.g., CFP) has been identified in a viral MP. Yet one of these proteins, MP of the Tobacco mosaic virus (TMV), was the first for which Pd localization and transport have been demonstrated20.
To address this gap, we developed an experimental strategy to identify TMV MP PLS. This strategy was based on three concepts. (i) We defined PLS as a minimal amino acid sequence that is both necessary and sufficient for protein targeting to Pd21. (ii) Because TMV MP first targets Pd and then translocates through these channels22, we aimed at uncoupling these two activities and identifying the bona fide PLS, which functions only for Pd targeting, and not for the subsequent transport. (iii) We analyzed the identified PLS for amino acid residues important for its Pd targeting activity, whether structurally or functionally. Using this approach, we delineated a 50-amino acid residue sequence at the amino-terminus of TMV MP that acts as bona fide PLS. This was done by producing a series of TMV MP fragments that saturated the entire length of the protein, tagging their carboxyl-termini with CFP and transiently expressing them in plant tissues. Pd localization of each of the tested fragments was determined by coexpressing them with a Pd marker protein, PDCB1 (Pd callose binding protein 1)23. The smallest fragment that still localized to Pd, but did not traverse Pd, was considered to represent PLS. Finally, the PLS was alanine-scanned to determine the key amino acid residues required for its structure and/or function.
Whereas here we illustrate this approach by describing identification of TMV MP PLS, it may be employed to discover PLSs in any other Pd-targeted proteins, whether encoded by plant pathogens or by the plants themselves; this is because our method does not take advantage of any unique features of viral MPs with regards to their ability to target to Pd.

<table border="0" cellpadding="0" cellspacing="0" width="1086">
	<tbody>
		<tr height="20">
			<td height="20" style="height:20px;width:293px;">Confocal laser scanning microscope (CLSM)</td>
			<td style="width:176px;">Zeiss</td>
			<td style="width:268px;">LSM5</td>
			<td style="width:349px;">Any CLSM with similar capabilities is appropriate</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Zen software for confocal microscope imaging</td>
			<td>Zeiss</td>
			<td>2009 version</td>
			<td>The software should be compatible with the CLSM used</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Quickchange II site-directed mutagenesis kit&#160;</td>
			<td>Agilent</td>
			<td>200523</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Acetosyringone</td>
			<td style="width:176px;">Sigma-Aldrich</td>
			<td>D134406</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">MES</td>
			<td style="width:176px;">Sigma-Aldrich</td>
			<td>69892</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Syringes without needles</td>
			<td>BD</td>
			<td>309659</td>
			<td></td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;">MgCl2</td>
			<td>FisherScientific</td>
			<td>M33-500</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Spectinomycin&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>S4014</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Rifampicin</td>
			<td>Sigma-Aldrich</td>
			<td>R3501</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Ampicillin&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>A0166</td>
			<td></td>
		</tr>
	</tbody>
</table>

identification of plasmodesmal localization sequences in proteins in planta

Plasmodesmata (Pd) are cell-to-cell connections that function as gateways through which small and large molecules are transported between plant cells. Whereas Pd transport of small molecules, such as ions and water, is presumed to occur passively, cell-to-cell transport of biological macromolecules, such proteins, most likely occurs via an active mechanism that involves specific targeting signals on the transported molecule. The scarcity of identified plasmodesmata (Pd) localization signals (PLSs) has severely restricted the understanding of protein-sorting pathways involved in plant cell-to-cell macromolecular transport and communication. From a wealth of plant endogenous and viral proteins known to traffic through Pd, only three PLSs have been reported to date, all of them from endogenous plant proteins. Thus, it is important to develop a reliable and systematic experimental strategy to identify a functional PLS sequence, that is both necessary and sufficient for Pd targeting, directly in the living plant cells. Here, we describe one such strategy using as a paradigm the cell-to-cell movement protein (MP) of the Tobacco mosaic virus (TMV). These experiments, that identified and characterized the first plant viral PLS, can be adapted for discovery of PLS sequences in most Pd-targeted proteins.

The representative data, which faithfully illustrate the results expected from the described protocols and identify the TMV MP PLS, are adapted from Yuan et al.21. Figure 1A first summarizes major constructs expressing the full-length TMV MP (1-268), TMV MP PLS (comprising the first 50 amino acid residues of the protein, 1-50), and its alanine scanning V4A derivatives fused to CFP (generated as described in Steps 2.2, 5.2 and 6) whereas <s...

Watch this Scientific Journal Video about Identification of Plasmodesmal Localization Sequences in Proteins In Planta at JoVE.com

Identification of Plasmodesmal Localization Sequences in Proteins In Planta

Plant intercellular connections, the plasmodesmata (Pd), play central roles in plant physiology and plant-virus interactions. Critical to Pd transport are sorting signals that direct proteins to Pd. However, our knowledge about these sequences is still in its infancy. We describe a strategy to identify Pd localization signals in Pd-targeted proteins.

Identification of Plasmodesmal Localization Sequences in Proteins In Planta

Plasmodesmata (Pd) are cell-to-cell connections that function as gateways through which small and large molecules are transported between plant cells. ...

identification-plasmodesmal-localization-sequences-proteins

Universidad de Cartagena UDEC

Research

JoVE Journal

Immunology and Infection

8.2K Views.  State University of New York. Plant intercellular connections, the plasmodesmata (Pd), play central roles in plant physiology and plant-virus interactions. Critical to Pd transport are sorting signals that direct proteins to Pd. However, our knowledge about these sequences is still in its infancy. We describe a strategy to identify Pd localization signals in Pd-targeted proteins.

Video: Identification of Plasmodesmal Localization Sequences in Proteins In Planta

Genotypic Inference of HIV-1 Tropism Using Population-based Sequencing of V3

Background: Prior to receiving a drug from CCR5-antagonist class in HIV therapy, a patient must undergo an HIV tropism test to confirm that his or her viral population uses the CCR5 coreceptor for cellular entry, and not an alternative coreceptor. One approach to tropism testing is to examine the sequence of the V3 region of the HIV envelope, which interacts with the coreceptor.
Methods: Viral RNA is extracted from blood plasma. The V3 region is amplified in triplicate with nested reverse transcriptase-PCR. The amplifications are then sequenced and analyzed using the software, RE_Call. Sequences are then submitted to a bioinformatic algorithm such as geno2pheno to infer viral tropism from the V3 region. Sequences are inferred to be non-R5 if their geno2pheno false positive rate falls below 5.75%. If any one of the three sequences from a sample is inferred to be non-R5, the patient is unlikely to respond to a CCR5-antagonist.

HIV tropism can be inferred from the V3 region of the viral envelope. V3 is PCR amplified in triplicate using nested RT-PCR, sequenced, and interpreted using bioinformatic software. Samples with with 1 or more sequence(s) with low g2P scores are classified as non-R5 virus.

Background: Prior to receiving a drug from CCR5-antagonist class in HIV therapy, a patient must undergo an HIV tropism test to confirm that his or her ...

Visualizing Dengue Virus through Alexa Fluor Labeling

The early events in the interaction between virus and cell can have profound influence on the outcome of infection. Determining the factors 
that influence this interaction could lead to improved understanding of disease pathogenesis and thus influence vaccine or therapeutic design. Hence, the development 
of methods to probe this interaction would be useful. Recent advancements in fluorophores development1-3 and imaging technology4 can be exploited to 
improve our current knowledge on dengue pathogenesis and thus pave the way to reduce the millions of dengue infections occurring annually.

The enveloped dengue virus has an external scaffold consisting of 90 envelope glycoprotein (E) dimers protecting the nucleocapsid shell, 
which contains a single positive strand RNA genome5. The identical protein subunits on the virus surface can thus be labeled with an amine reactive dye and visualized 
through immunofluorescent microscopy. Here, we present a simple method of labeling of dengue virus with Alexa Fluor succinimidyl ester dye dissolved directly in a sodium 
bicarbonate buffer that yielded highly viable virus after labeling. There is no standardized procedure for the labeling of live virus and existing manufacturer&#x2019;s protocol 
for protein labeling usually requires the reconstitution of dye in dimethyl sulfoxide. The presence of dimethyl sulfoxide, even in minute quantities, can block 
productive infection of virus and also induce cell cytotoxicity6. The exclusion of the use of dimethyl sulfoxide in this protocol thus reduced this possibility. 
Alexa Fluor dyes have superior photostability and are less pH-sensitive than the common dyes, such as fluorescein and rhodamine2, making them ideal for 
studies on cellular uptake and endosomal transport of the virus. The conjugation of Alexa Fluor dye did not affect the recognition of labeled dengue 
virus by virus-specific antibody and its putative receptors in host cells7. This method could have useful applications in virological studies.

Taking advantage of the advancements in fluorophore development and imaging technology, a simple method of Alexa Fluor labeling of dengue virus was devised to visualize the early interactions between virus and cell.

The early events in the interaction between virus and cell can have profound influence on the outcome of infection. Determining the factors 
that ...

Culturing Microglia from the Neonatal and Adult Central Nervous System

Microglia are the resident macrophage-like cells of the central nervous system (CNS) and, as such, have critically important roles in physiological and pathological processes such as CNS maturation in development, multiple sclerosis, and spinal cord injury. Microglia can be activated and recruited to action by neuronal injury or stimulation, such as axonal damage seen in MS or ischemic brain trauma resulting from stroke. These immunocompetent members of the CNS are also thought to have roles in synaptic plasticity under non-pathological conditions. We employ protocols for culturing microglia from the neonatal and adult tissues that are aimed to maximize the viable cell numbers while minimizing confounding variables, such as the presence of other CNS cell types and cell culture debris. We utilize large and easily discernable CNS components (e.g. cortex, spinal cord segments), which makes the entire process feasible and reproducible. The use of adult cells is a suitable alternative to the use of neonatal brain microglia, as many pathologies studied mainly affect the postnatal spinal cord. These culture systems are also useful for directly testing the effect of compounds that may either inhibit or promote microglial activation. Since microglial activation can shape the outcomes of disease in the adult CNS, there is a need for in vitro systems in which neonatal and adult microglia can be cultured and studied.

We outline methods for the efficient and quick isolation/culture of viable microglia from the neonatal cerebral cortex and adult spinal cord. The dissection and plating of cortical microglia can be accomplished within 90 minutes, with the subsequent microglial harvest taking place ~ 10 days following the initial dissection.

Microglia are the resident macrophage-like cells of the central nervous system (CNS) and, as such, have critically important roles in physiological and ...

Fluorescence in situ Hybridizations (FISH) for the Localization of Viruses and Endosymbiotic Bacteria in Plant and Insect Tissues

Fluorescence in situ hybridization (FISH) is a name given to a variety of techniques commonly used for visualizing gene transcripts in eukaryotic cells and can be further modified to visualize other components in the cell such as infection with viruses and bacteria. Spatial localization and visualization of viruses and bacteria during the infection process is an essential step that complements expression profiling experiments such as microarrays and RNAseq in response to different stimuli. Understanding the spatiotemporal infections with these agents complements biological experiments aimed at understanding their interaction with cellular components. Several techniques for visualizing viruses and bacteria such as reporter gene systems or immunohistochemical methods are time-consuming, and some are limited to work with model organisms&#160;and involve complex methodologies. FISH that targets RNA or DNA species in the cell is a relatively easy and fast method for studying spatiotemporal localization of genes and for diagnostic purposes. This method can be robust and relatively easy to implement when the protocols employ short hybridizing, commercially-purchased probes, which are not expensive. This is particularly robust when sample preparation, fixation, hybridization, and microscopic visualization do not involve complex steps. Here we describe a protocol for localization of bacteria and viruses in insect and plant tissues. The method is based on simple preparation, fixation, and hybridization of insect whole mounts and dissected organs or hand-made plant sections, with 20 base pairs short DNA probes conjugated to fluorescent dyes on their 5&#39; or 3&#39; ends. This protocol has been successfully applied to a number of insect and plant tissues, and can be used to analyze expression of mRNAs or other RNA or DNA species in the cell.

Fluorescence in situ Hybridizations FISH for the Localization of Viruses and Endosymbiotic Bacteria in Plant and Insect Tissues

We describe here a simple fluorescence in situ hybridization (FISH) method for the localization of viruses and bacteria in insect and plant tissues. This protocol can be extended for the visualization of mRNA in whole mount and microscopic sections.

Fluorescence in situ hybridization (FISH) is a name given to a variety of techniques commonly used for visualizing gene transcripts in eukaryotic cells ...

Using Fluorescent Proteins to Visualize and Quantitate Chlamydia Vacuole Growth Dynamics in Living Cells

The obligate intracellular bacterium Chlamydia elicits a great burden on global public health. C.&#160;trachomatis is the leading bacterial cause of sexually transmitted infection and also the primary cause of preventable blindness in the world. An essential determinant for successful infection of host cells by Chlamydia is the bacterium's ability to manipulate host cell signaling from within a novel, vacuolar compartment called the inclusion. From within the inclusion, Chlamydia acquire nutrients required for their 2-3 day developmental growth, and they additionally secrete a panel of effector proteins onto the cytosolic face of the vacuole membrane and into the host cytosol. Gaps in our understanding of Chlamydia biology, however, present significant challenges for visualizing and analyzing this intracellular compartment. Recently, a reverse-imaging strategy for visualizing the inclusion using GFP expressing host cells was described. This approach rationally exploits the intrinsic impermeability of the inclusion membrane to large molecules such as GFP. In this work, we describe how GFP- or mCherry-expressing host cells are generated for subsequent visualization of chlamydial inclusions. Furthermore, this method is shown to effectively substitute for costly antibody-based enumeration methods, can be used in tandem with other fluorescent labels, such as GFP-expressing Chlamydia, and can be exploited to derive key quantitative data about inclusion membrane growth from a range of Chlamydia species and strains.

Using Fluorescent Proteins to Visualize and Quantitate Chlamydia Vacuole Growth Dynamics in Living Cells

A live cell fluorescent protein based method for illuminating cellular vacuoles (inclusions) containing Chlamydia is described. This strategy enables rapid, automated determination of Chlamydia infectivity in samples and can be used to quantitatively investigate inclusion growth dynamics.

The obligate intracellular bacterium Chlamydia elicits a great burden on global public health. C.&#160;trachomatis is the leading bacterial cause of ...

Rapid Identification of Gram Negative Bacteria from Blood Culture Broth Using MALDI-TOF Mass Spectrometry

An important role of the clinical microbiology laboratory is to provide rapid identification of bacteria causing bloodstream infection. Traditional identification requires the sub-culture of signaled blood culture broth with identification available only after colonies on solid agar have matured. MALDI-TOF MS is a reliable, rapid method for identification of the majority of clinically relevant bacteria when applied to colonies on solid media. The application of MALDI-TOF MS directly to blood culture broth is an attractive approach as it has potential to accelerate species identification of bacteria and improve clinical management. However, an important problem to overcome is the pre-analysis removal of interfering resins, proteins and hemoglobin&#160;contained in blood culture specimens which, if not removed, interfere with the MS spectra and can result in insufficient or low discrimination identification scores. In addition it is necessary to concentrate bacteria to develop spectra of sufficient quality. The presented method describes the concentration, purification, and extraction of Gram negative bacteria allowing for the early identification of bacteria from a signaled blood culture broth.

The application of matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry (MS) directly to blood culture broth expedites the identification of bacteria. The presented method is a rapid and reliable method for identification of Gram negative bacteria directly from blood culture broth.

An important role of the clinical microbiology laboratory is to provide rapid identification of bacteria causing bloodstream infection. Traditional ...

Neutrophil Isolation and Analysis to Determine their Role in Lymphoma Cell Sensitivity to Therapeutic Agents

Neutrophils are the most abundant (40% to 75%) type of white blood cells and among the first inflammatory cells to migrate towards the site of inflammation. They are key players in the innate immune system and play major roles in cancer biology. Neutrophils have been proposed as key mediators of malignant transformation, tumor progression, angiogenesis and in the modulation of the antitumor immunity; through their release of soluble factors or their interaction with tumor cells. To characterize the specific functions of neutrophils, a fast and reliable method is coveted for in vitro isolation of neutrophils from human blood. Here, a density gradient separation method is demonstrated to isolate neutrophils as well as mononuclear cells from the blood. The procedure consists of layering the density gradient solution such as Ficoll carefully above the diluted blood obtained from patients diagnosed with chronic lymphocytic leukemia (CLL), followed by centrifugation, isolation of mononuclear layer, separation of neutrophils from RBCsby dextran then lysis of residual erythrocytes. This method has been shown to isolate neutrophils &#8805; 90 % pure. To mimic the tumor microenvironment, 3-dimensional (3D) experiments were performed using basement membrane matrix such as Matrigel. Given the short half-life of neutrophils in vitro, 3D experiments with fresh human neutrophils cannot be performed. For this reason promyelocytic HL60 cells are differentiated along the granulocytic pathway using the differentiation inducers dimethyl sulfoxide (DMSO) and retinoic acid (RA). The aim of our experiments is to study the role of neutrophils on the sensitivity of lymphoma cells to anti-lymphoma agents. However these methods can be generalized to study the interactions of neutrophils or neutrophil-like cells with a large range of cell types in different situations.

Neutrophils are the most abundant type of white blood cells. The isolation of neutrophils from human blood by density gradient separation method and the differentiation of human promyelocytic (HL60) cells along the granulocytic pathway are described here; to test their role on sensitivity of lymphoma cells to anti-lymphoma agents.

Neutrophils are the most abundant (40% to 75%) type of white blood cells and among the first inflammatory cells to migrate towards the site of ...

Purification of Viral DNA for the Identification of Associated Viral and Cellular Proteins

The goal of this protocol is to isolate herpes simplex virus type 1 (HSV-1) DNA from infected cells for the identification of associated viral and cellular proteins by mass spectrometry. Although proteins that interact with viral genomes play major roles in determining the outcome of infection, a comprehensive analysis of viral genome associated proteins was not previously feasible. Here we demonstrate a method that enables the direct purification of HSV-1 genomes from infected cells. Replicating viral DNA is selectively labeled with modified nucleotides that contain an alkyne functional group. Labeled DNA is then specifically and irreversibly tagged via the covalent attachment of biotin azide via a copper(I)-catalyzed azide-alkyne cycloaddition or click reaction. Biotin-tagged DNA is purified on streptavidin-coated beads and associated proteins are eluted and identified by mass spectrometry. This method enables the selective targeting and isolation of HSV-1 replication forks or whole genomes from complex biological environments. Furthermore, adaptation of this approach will allow for the investigation of various aspects of herpesviral infection, as well as the examination of the genomes of other DNA viruses.

The goal of this protocol is to specifically tag and selectively isolate viral DNA from infected cells for the characterization of viral genome associated proteins.

The goal of this protocol is to isolate herpes simplex virus type 1 (HSV-1) DNA from infected cells for the identification of associated viral and ...

Isolation of Salmonella typhimurium-containing Phagosomes from Macrophages

Salmonella typhimurium is a facultative intracellular bacterium that causes gastroenteritis in humans. After invasion of the lamina propria, S. typhimurium bacteria are quickly detected and phagocytized by macrophages, and contained in vesicles known as phagosomes in order to be degraded. Isolation of S. typhimurium-containing phagosomes have been widely used to study how S. typhimurium infection alters the process of phagosome maturation to prevent bacterial degradation. Classically, the isolation of bacteria-containing phagosomes has been performed by sucrose gradient centrifugation. However, this process is time-consuming, and requires specialized equipment and a certain degree of dexterity. Described here is a simple and quick method for the isolation of S. typhimurium-containing phagosomes from macrophages by coating the bacteria with biotin-streptavidin-conjugated magnetic beads. Phagosomes obtained by this method can be suspended in any buffer of choice, allowing the utilization of isolated phagosomes for a broad range of assays, such as protein, metabolite, and lipid analysis. In summary, this method for the isolation of S. typhimurium-containing phagosomes is specific, efficient, rapid, requires minimum equipment, and is more versatile than the classical method of isolation by sucrose gradient-ultracentrifugation.

Isolation of Salmonella typhimurium-containing Phagosomes from Macrophages

We describe here a simple and quick method for the isolation of Salmonella typhimurium-containing phagosomes from macrophages by coating the bacteria with biotin and streptavidin.

Salmonella typhimurium is a facultative intracellular bacterium that causes gastroenteritis in humans. After invasion of the lamina propria, S. ...

TurboID-Based Proximity Labeling for In Planta Identification of Protein-Protein Interaction Networks

Proximity labeling (PL) techniques using engineered ascorbate peroxidase (APEX) or Escherichia coli biotin ligase BirA (known as BioID) have been successfully used for identification of protein-protein interactions (PPIs) in mammalian cells. However, requirements of toxic hydrogen peroxide (H2O2) in APEX-based PL, longer incubation time with biotin (16&#8211;24 h), and higher incubation temperature (37 &#176;C) in BioID-based PL severely limit their applications in plants. The recently described TurboID-based PL addresses many limitations of BioID and APEX. TurboID allows rapid proximity labeling of proteins in just 10&#8201;min under room temperature (RT) conditions. Although the utility of TurboID has been demonstrated in animal models, we recently showed that TurboID-based PL performs better in plants compared to BioID for labeling of proteins that are proximal to a protein of interest. Provided here is a step-by-step protocol for the identification of protein interaction partners using the N-terminal Toll/interleukin-1 receptor (TIR) domain of the nucleotide-binding leucine-rich repeat (NLR) protein family as a model. The method describes vector construction, agroinfiltration of protein expression constructs, biotin treatment, protein extraction and desalting, quantification, and enrichment of the biotinylated proteins by affinity purification. The protocol described here can be easily adapted to study other proteins of interest in Nicotiana and other plant species.

Described here is a proximity labeling method for identification of interaction partners of the TIR domain of the NLR immune receptor in Nicotiana benthamiana leaf tissue. Also provided is a detailed protocol for the identification of interactions between other proteins of interest using this technique in Nicotiana and other plant species.

Identification of Plasmodesmal Localization Sequences in Proteins In Planta

Summary

Explore More Videos

Chapters in this video

Genotypic Inference of HIV-1 Tropism Using Population-based Sequencing of V3

Visualizing Dengue Virus through Alexa Fluor Labeling

Culturing Microglia from the Neonatal and Adult Central Nervous System

Fluorescence in situ Hybridizations (FISH) for the Localization of Viruses and Endosymbiotic Bacteria in Plant and Insect Tissues

Using Fluorescent Proteins to Visualize and Quantitate Chlamydia Vacuole Growth Dynamics in Living Cells

Rapid Identification of Gram Negative Bacteria from Blood Culture Broth Using MALDI-TOF Mass Spectrometry

Neutrophil Isolation and Analysis to Determine their Role in Lymphoma Cell Sensitivity to Therapeutic Agents

Purification of Viral DNA for the Identification of Associated Viral and Cellular Proteins

Isolation of Salmonella typhimurium-containing Phagosomes from Macrophages

TurboID-Based Proximity Labeling for In Planta Identification of Protein-Protein Interaction Networks