The authors would like to thank Lorenzo Sewanan and Jorge Nunez for their work developing the tissue culture cassette design used in this protocol, the Kaminski lab for use of their vibratome, Maurizio Chioccioli and Jessica Nouws for assistance with lung slicing, Allie LaRocco for assistance with initial pilot experiments, and Hong Qian for careful reading of the protocol. This work was supported by NIH grants F30HL143880 (K.L.L.), the Medical Scientist Training Program Training Grant T32GM136651 (K.L.L.), and U01HL145567 (L.E.N.); and by an unrestricted research gift from Humacyte Inc. (L.E.N.).

L.E.N. is a founder and shareholder in Humacyte, Inc, which is a regenerative medicine company. Humacyte produces engineered blood vessels from allogeneic smooth muscle cells for vascular surgery. L.E.N.'s spouse has equity in Humacyte, and L.E.N. serves on Humacyte's Board of Directors. L.E.N. is an inventor on patents that are licensed to Humacyte and that produce royalties for L.E.N. L.E.N. has received an unrestricted research gift to support research in her laboratory at Yale. Humacyte did not influence the conduct, description or interpretation of the findings in this report.

This paper describes the use of decellularized precision-cut lung slices as a platform to generate engineered lung tissues in vitro, which contain multi-lineage alveolar-like structures. By combining strategies that we previously developed to repopulate high-fidelity acellular ECM lung scaffolds for whole lung engineering22,31, with our robust system for culturing small-scale engineered heart tissues30, this protocol enables the use of physiologically relevant lung ECM as a tissue culture substrate, in a repeatable and moderate-throughput manner.
The methods presented here detail ELT scaffold preparation from rat lungs, which are readily attainable, may be extracted en bloc with direct access to intact airways for agarose inflation, and are of larger size than mouse lung. However, any lung tissue that can be inflated with agarose and yield slices at least 9 mm in length may be used within this system. Regardless of tissue source, uniform inflation of the lung tissue with agarose is the most critical step for ensuring success of downstream tissue slicing, clipping, and tissue handling. Underinflated lung tissue tends not to slice cleanly, while overinflated tissue may tear during clipping. Following agarose gelation, appropriately inflated tissue regions are firm but provide a little give when gently pressed with forceps. For intact rat lungs, we found that pre-inflating the extracted lungs with air several times, followed by agarose inflation as soon as possible after extraction, results in the best slicing outcomes and best quality of resulting tissue scaffolds. The appropriate volume of agarose needs to be optimized empirically; for a rat lung the volume required to inflate the lung to total lung capacity is approximately 30 mL/kg animal mass (e.g., 10.5 mL agarose for lungs from a 350 g rat). For larger resected lung tissues with less straightforward airway access (such as those from human donors), some additional troubleshooting may be necessary to inflate the tissue via a bronchus32. During subsequent lung slicing, the selection and orientation of the tissue on the plunger is another important step to 1) ensure that the slices are large enough to generate tissue strips that can be clipped into tissue culture cassettes and 2) maximize parenchymal (alveolar) tissue area, excluding large airways or vessels.
Clipping the PCLS into tissue culture cassettes can be a challenging step initially, but the cassettes greatly simplify tissue handling during decellularization and seeding. Two potential problems that may arise are tissue tearing (either during the process of clipping, or during decellularization), or tissue positioning in the clips that results in poor downstream seeding (e.g., no seeding, or seeding just at the ends). Tearing may be the result of agarose overinflation, overstretching of the tissue during tab insertion, or leaving too little overhang to provide adequate tissue grip when inserting the tabs. Note that slices that tear at one clip end may be successfully seeded, however, they are difficult to visualize under the microscope during culture as the tissue is not flat. Poor tissue seeding (such as that in Figure 6C) is likely the result of the slice not lying flat between the two clips, and thus making poor contact with the base of the seeding bath well when flipped upside-down. Another possible cause is improper seating of the cassette in the bottom of the seeding bath well. In terms of clipping, apply slightly more tension in the tissue when placing the second clip to help it lie flat. Some slices have a slight concavity; in these cases clip the slice with the convex side up. With practice, we typically experience failed seeding with fewer than 2% of slices.
One limitation of this protocol is the requirement for some specialized equipment - a laser cutter and a 3D printer - to generate the initial materials for ELT preparation. However, once the tissue culture cassettes and seeding baths are created, no additional special materials are required. The lung slicing and decellularization steps of ELT scaffold preparation are moderately time-consuming; however, these steps may be performed in advance, or in numbers sufficient to prepare for multiple experiments at the same time. Many PCLS (&#62;100 if optimizing for parenchymal regions) can be cut from a single lung and snap-frozen for later use. While a single freeze-thaw cycle may cause minor ultrastructural damage to the ECM46, even multiple freeze-thaw cycles have been demonstrated not to cause a significant loss in ECM23,47. PCLS may also be clipped and decellularized in advance of an experiment, to be used within one month. (Notably, the described decellularization protocol can be accomplished in approximately 6 hours, which represents a significant advantage over previously described methods that require a day or more27,28.) Once the scaffolds are prepared, the cell seeding process is simple and fast, and the culture of ELTs does not require specialized techniques.
A caveat of the described ELT method is the lack of region-specific seeding, i.e., the delivery of AEC2s specifically to the alveolar space, or endothelial cells specifically to the vascular space. Nevertheless, although cells are simply seeded on top of the tissue scaffolds, the pattern of recellularization is non-random, with some semblance of alveolar-like organization, including epithelial rings. We suspect that cell-cell interactions, as well as local differences in ECM composition and geometry20,21, likely contribute to the observed recellularization patterns. In support of this hypothesis, a previously published study, in which fibroblasts were seeded non-specifically onto decellularized lung slices, demonstrated that the pattern of tissue repopulation and associated cellular phenotypes varied significantly by microscopic tissue region and ECM scaffold source (e.g., healthy versus diseased)27. Fibroblasts were also observed to invade into the interstitium - the location in which they reside in native lung tissue1,27. The primary alternative method that we can imagine to culture cells on lung slices in a truly region-specific manner would entail seeding intact decellularized lungs via the airway31,48 and vascular compartments49,50, and then slicing the recellularized tissue. However, this alternative 1) is significantly more cost-, time-, and resource-intensive; 2) is lower throughput; 3) requires increased numbers of animals; and 4) is associated with an increased risk of contamination due to the challenges of whole lung culture and subsequent slicing of the seeded lung. While not recapitulating all aspects of native cellular organization, the ELT platform enables lung cell culture on a physiologically relevant ECM substrate, in a manner that is accessible to many more labs.
The flexibility of the ELT system is a major advantage of this platform, and should allow small-scale lung tissue culture with any number of tissue scaffolds, cells, or culture media of interest. The use of scaffolds derived from diseased tissue or from injury models may permit the study of cell-cell or cell-matrix interactions in the setting of disease-altered ECM27,29,51. However, note that the decellularization protocol may need to be adapted to account for matrix differences among species52. The described seeding strategy can be used for any cell type, and the culture timeline adapted to fit the needs of the researcher. As a starting point, 1 x 106 cells per scaffold should yield a highly cellular tissue within 7 days of culture, whereas 1 x 105 total cells result in poor cellularity. In any adaptation of the timeline, the tissue culture cassettes should be removed from the seeding bath 24 h following the last tissue seeding. Here, with the goal of modeling some of the cellular complexity of the lung alveolus, we describe a tri-culture recellularization strategy that supports the maintenance of well-differentiated neonatal AEC2s in alveolar-like structures for at least 7 days. Our results also demonstrate the successful engraftment of both fibroblasts and endothelial cells within ELTs, emphasizing the broad applicability of the culture substrate and its suitability for co-culture studies. Seeding adult cells in ELTs may facilitate the modeling of more quiescent alveolar structures, while seeding human PSC-derived AEC2s, including those with genetic modifications, could facilitate translational studies of human disease13,53. In general, the bottom-up approach enabled by the ELT platform presents the opportunity to investigate the contributions of particular cell types to readouts of interest - such as AEC2 proliferation or differentiation state.
In summary, this protocol outlines a robust system for generating engineered lung tissues for co-culture studies of AEC2s, fibroblasts, and endothelial cells within acellular ECM lung slice scaffolds. ELTs represent a novel 3D culture strategy for primary AEC2s, which to date have typically relied upon less-physiologic gel-type matrices to maintain a well-differentiated phenotype6,11,12. The current platform builds upon previous work in the repopulation of decellularized lung slices24,25,26,27,28,29, but offers several advantages: 1) a tissue culture cassette system to facilitate ELT handling during decellularization, seeding, and culture; 2) a customized seeding bath to precisely seed a known number of cells on each slice scaffold; and 3) a tri-culture reseeding strategy that enables alveolar tissue repopulation with epithelial, mesenchymal, and endothelial cells. Thus, ELTs represent an important step forward toward creating reproducible in vitro models that capture the cellular and substrate complexity of the native alveolus and the AEC2 stem cell niche.

Alveoli are the functional units of the distal lung, comprising a meshwork of gas-exchanging airspaces lined by alveolar epithelial type 1 cells (AEC1s) and type 2 cells (AEC2s). Underlying the epithelium is a dense network of capillaries as well as supporting mesenchyme, all buttressed by an extracellular matrix (ECM) scaffold that provides both strength and flexibility to these delicate air sacs1. The alveoli are also the site of injury in numerous lung pathologies, including idiopathic pulmonary fibrosis2, acute respiratory distress syndrome3, and severe coronavirus disease-19 (COVID-19)4. Although work over the past decade has uncovered a remarkable plasticity within the lung epithelium, the mechanisms that enable distal lung repair in some settings - and that preclude repair in others - remain an area of intense investigation5. The development of improved in vitro platforms to model the alveolus would facilitate studies of alveolar biology, regeneration, and therapeutics.
AEC2s self-renew and differentiate into AEC1s, and thus are considered the primary stem cell of the distal lung6,7,8. However, these cells pose a particular challenge to in vitro study given the difficulties associated with culturing primary AEC2s without a loss of phenotype9. In conventional 2-dimensional (2D) culture, AEC2s flatten and adopt some features of AEC1-like cells10. In contrast, 3D culture strategies, most commonly organoids, support the maintenance of differentiated features in primary AEC2s6,11,12 and permit long-term culture of pluripotent stem cell (PSC)-derived AEC2s13,14. Organoids have been used to model distal lung development15, viral infection11,15, and AEC2-related genetic disease13,16,17, enabling important insights into AEC2 biology and regeneration. However, these culture models typically comprise just one or two cellular lineages, and embed the cells in gel-type matrices that fail to recapitulate either the architecture or the ECM substrate of the native lung alveolus.
The ECM is a critical regulator of cell phenotype and behavior via molecular, topological, and mechanical cues; comprises a key component of tissue-specific niches regulating stem cell fate; and serves as a reservoir that modulates the availability of locally-secreted growth factors18,19,20,21. Culturing cells on native ECM may thus increase the predictive capacity of in vitro systems to model the biology of in vivo tissues. Decellularization, a process that removes cellular material from tissues via detergents, enzymes, or physical or other methods, can preserve in large part the ECM scaffolding of a native organ, when carefully performed22,23. Such scaffolds can be repopulated with cells for 3D biomimetic culture. However, while decellularized scaffolds are widely used for tissue engineering applications, their use for routine cell culture has been limited. Several previous studies have reported the decellularization and recellularization of lung slices or small lung tissue segments. In addition to proof-of-concept studies24,25,26, repopulated lung slices have been used to study fibroblast-matrix adhesion27,28 and to investigate the effect of diseased lung matrices on fibroblast phenotype27,29. With improved technologies available for generating precision-cut tissue slices, decellularized lung slices could offer a convenient and small-scale platform with which to culture cells, while preserving alveolar, airway, and vascular substructures. Incorporating multiple cell types would enable studies of cell-cell interactions within a physiologically relevant 3D environment. However, improved strategies are needed to facilitate the handling of tissues throughout the culture process, and to ensure controlled and reproducible seeding of tissues with known numbers of cells.
Here, we present a protocol to generate engineered lung tissues (ELTs) by repopulating decellularized precision-cut lung slices (PCLS) with primary endothelial cells, AEC2s, and fibroblasts. In an adaptation of our previously described engineered heart tissue system30 and whole lung decellularization-recellularization strategies22,31, we describe procedures to cut PCLS from rat lungs and to clip the slices into reusable tissue culture cassettes that simplify and standardize downstream manipulations. Clipped slices are decellularized to form acellular ECM scaffolds, which are repopulated in customized seeding baths. Lung slice scaffolds preserve critical ECM components and architecture, and support the growth of AEC2s within multi-lineage alveolar-like structures for at least 7 days. ELTs represent a novel alveolar co-culture system within a physiologically relevant 3D matrix, which should support the development of lung tissue engineering strategies, while facilitating basic biological studies of AEC2s and the alveolus.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>3D Printer: Form 2</td>
			<td>Formlabs</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>3-Isobutyl-1-methylxanthine (IBMX)</td>
			<td>Sigma</td>
			<td>I5879</td>
			<td></td>
		</tr>
		<tr>
			<td>8-Bromo cAMP</td>
			<td>Sigma</td>
			<td>B7880</td>
			<td></td>
		</tr>
		<tr>
			<td>Agarose, UltraPure LMP</td>
			<td>Invitrogen</td>
			<td>15517-014</td>
			<td></td>
		</tr>
		<tr>
			<td>Amphotericin B</td>
			<td>Sigma</td>
			<td>A2942</td>
			<td></td>
		</tr>
		<tr>
			<td>Barbed reducer fitting, 3/8 inch x 1/4 inch</td>
			<td>McMaster-Carr</td>
			<td>5121K271</td>
			<td></td>
		</tr>
		<tr>
			<td>Benzonase nuclease</td>
			<td>Sigma</td>
			<td>E1014</td>
			<td></td>
		</tr>
		<tr>
			<td>Bovine serum albumin (BSA) Fraction V</td>
			<td>Gemini</td>
			<td>700-104P</td>
			<td>For AEC2 growth medium</td>
		</tr>
		<tr>
			<td>Bovine serum albumin (BSA), standard grade</td>
			<td>Gemini</td>
			<td>700-100P</td>
			<td>For benzonase buffer</td>
		</tr>
		<tr>
			<td>Check valve, polypropylene, 1/8 inch hose barb</td>
			<td>Cole-Parmer</td>
			<td>SK-98553-10</td>
			<td></td>
		</tr>
		<tr>
			<td>CHIR99021</td>
			<td>PeproTech</td>
			<td>2520691</td>
			<td></td>
		</tr>
		<tr>
			<td>Clear Resin, 1 L</td>
			<td>Formlabs</td>
			<td>RS-F2-GPCL-04</td>
			<td></td>
		</tr>
		<tr>
			<td>Cyanoacrylate glue, such as Krazy Maximum Bond Permanent Glue</td>
			<td>Any hardware, craft, or drug store</td>
			<td>KG483 or similar</td>
			<td></td>
		</tr>
		<tr>
			<td>Dexamethasone</td>
			<td>Sigma</td>
			<td>D4902</td>
			<td></td>
		</tr>
		<tr>
			<td>DMEM (low glucose)</td>
			<td>Gibco</td>
			<td>11885-084</td>
			<td></td>
		</tr>
		<tr>
			<td>DMEM (high glucose)</td>
			<td>Gibco</td>
			<td>11965-092</td>
			<td></td>
		</tr>
		<tr>
			<td>DNA assay (Quant-iT PicoGreen dsDNA Assay Kit)</td>
			<td>Invitrogen</td>
			<td>P7589</td>
			<td></td>
		</tr>
		<tr>
			<td>EDTA, 0.5 M, pH 8.0</td>
			<td>AmericanBio</td>
			<td>AB00502-01000</td>
			<td></td>
		</tr>
		<tr>
			<td>EdU kit (Click-iT EdU Cell Proliferation Kit for Imaging, Alexa Fluor 647)</td>
			<td>Invitrogen</td>
			<td>C10340</td>
			<td>Used according to manufacturer&#39;s directions</td>
		</tr>
		<tr>
			<td>Elbow fitting, 3/8 inch</td>
			<td>McMaster-Carr</td>
			<td>5121K907</td>
			<td></td>
		</tr>
		<tr>
			<td>F12</td>
			<td>Gibco</td>
			<td>11765-054</td>
			<td></td>
		</tr>
		<tr>
			<td>Fetal bovine serum (FBS), characterized</td>
			<td>Hyclone</td>
			<td>SH30071.03</td>
			<td></td>
		</tr>
		<tr>
			<td>Gentamicin sulfate</td>
			<td>Gemini</td>
			<td>400-100P</td>
			<td>Reconstituted in diH2O for a stock solution at 50 mg/mL</td>
		</tr>
		<tr>
			<td>Hair clippers</td>
			<td>Wahl</td>
			<td>MiniArco</td>
			<td></td>
		</tr>
		<tr>
			<td>Hank&#39;s balanced salt solution (HBSS), Phenol Red Free</td>
			<td>Gibco</td>
			<td>14175-095</td>
			<td></td>
		</tr>
		<tr>
			<td>Heparin sodium injection, USP, 1000 U/mL</td>
			<td>Sagent</td>
			<td>NDC: 25021-400-30</td>
			<td>For intraperitoneal and intracardiac injection</td>
		</tr>
		<tr>
			<td>Heparin sodium salt</td>
			<td>Sigma</td>
			<td>H4784</td>
			<td>For pulmonary artery perfusion; prepare stock solution at 100 U/mL in PBS</td>
		</tr>
		<tr>
			<td>HEPES Buffer</td>
			<td>Corning</td>
			<td>25-060-Cl</td>
			<td></td>
		</tr>
		<tr>
			<td>Inline tee fitting, 3/8 inch x 1/8 inch</td>
			<td>McMaster-Carr</td>
			<td>5121K851</td>
			<td></td>
		</tr>
		<tr>
			<td>Inoculating loop, disposable</td>
			<td>Fisherbrand</td>
			<td>22-363-600</td>
			<td></td>
		</tr>
		<tr>
			<td>Insulin from bovine pancreas</td>
			<td>Sigma</td>
			<td>I6634</td>
			<td></td>
		</tr>
		<tr>
			<td>Ketamine injection, 100 mg/mL</td>
			<td>Covetrus (Butler Animal Health)</td>
			<td>010177</td>
			<td></td>
		</tr>
		<tr>
			<td>KGF, recombinant human</td>
			<td>PeproTech</td>
			<td>100-19</td>
			<td></td>
		</tr>
		<tr>
			<td>Laser cutter, VLS 3.50 30 watt</td>
			<td>Universal Laser Systems</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>L-glutamine</td>
			<td>Gibco</td>
			<td>25030-081</td>
			<td></td>
		</tr>
		<tr>
			<td>Luer-lock, female, 3/32 inch</td>
			<td>Cole-Parmer</td>
			<td>45508-02</td>
			<td></td>
		</tr>
		<tr>
			<td>Luer-lock, male, 1/8 inch</td>
			<td>Cole-Parmer</td>
			<td>30800-24</td>
			<td></td>
		</tr>
		<tr>
			<td>Luer-lock, male, 1/4 inch</td>
			<td>McMaster-Carr</td>
			<td>51525K146</td>
			<td></td>
		</tr>
		<tr>
			<td>MCDB-131 Complete without serum</td>
			<td>VEC Technologies</td>
			<td>MCDB-131 WOFBS</td>
			<td></td>
		</tr>
		<tr>
			<td>Magnesium chloride (MgCl2), 1 M</td>
			<td>AmericanBio</td>
			<td>AB09006-00100</td>
			<td></td>
		</tr>
		<tr>
			<td>NaCl</td>
			<td>American Bioananalytical</td>
			<td>AB01915</td>
			<td></td>
		</tr>
		<tr>
			<td>Phosphate buffered saline (PBS), without Ca2+ and Mg2+, 10X</td>
			<td>Sigma</td>
			<td>D1408</td>
			<td>Reconstitute to 1X with diH2O</td>
		</tr>
		<tr>
			<td>Phosphate buffered saline (PBS), with Ca2+ and Mg2+</td>
			<td>Gibco</td>
			<td>21300-058</td>
			<td></td>
		</tr>
		<tr>
			<td>PDMS - SYLGARD 184 Silicone Elastomer Kit</td>
			<td>Dow Corning Corporation</td>
			<td>4019862</td>
			<td></td>
		</tr>
		<tr>
			<td>Penicillin/Streptomycin (10,000 U/mL penicillin/10,000 &#956;g/mL streptomycin)</td>
			<td>Gibco</td>
			<td>15140-122</td>
			<td></td>
		</tr>
		<tr>
			<td>Petri dish, 150 mm</td>
			<td>Falcon</td>
			<td>351058</td>
			<td></td>
		</tr>
		<tr>
			<td>Plastic film (parafilm)</td>
			<td>Bemis</td>
			<td>PM-996</td>
			<td></td>
		</tr>
		<tr>
			<td>Pharmed BPT tubing, LS 16</td>
			<td>Masterflex</td>
			<td>06508-16</td>
			<td></td>
		</tr>
		<tr>
			<td>Pharmed BPT tubing, LS 17</td>
			<td>Masterflex</td>
			<td>06508-17</td>
			<td></td>
		</tr>
		<tr>
			<td>Platinum-cured silicone tubing, LS 14</td>
			<td>Masterflex</td>
			<td>96420-14</td>
			<td></td>
		</tr>
		<tr>
			<td>Platinum-cured silicone tubing, LS 16</td>
			<td>Masterflex</td>
			<td>96420-16</td>
			<td></td>
		</tr>
		<tr>
			<td>Platinum-cured silicone tubing, LS 36</td>
			<td>Masterflex</td>
			<td>96410-36</td>
			<td></td>
		</tr>
		<tr>
			<td>Poloxamer 407 (Pluronic F-127)</td>
			<td>Sigma</td>
			<td>P2443</td>
			<td></td>
		</tr>
		<tr>
			<td>Povidone/iodine prep pads, 10%</td>
			<td>Dynarex Corporation</td>
			<td>1108</td>
			<td></td>
		</tr>
		<tr>
			<td>PTFE sheet, 0.060 inch (1/16 inch) thick</td>
			<td>ePlastics</td>
			<td>PTFENAT0.060X12X12</td>
			<td>For tissue culture cassette tabs</td>
		</tr>
		<tr>
			<td>PTFE sheet, 0.093 inch (3/32 inch) thick</td>
			<td>ePlastics</td>
			<td>PTFENAT0.093X12X12</td>
			<td>For tissue culture cassette frames and clips</td>
		</tr>
		<tr>
			<td>Peristaltic pump drive: Masterflex L/S Variable-Speed Digital Drive</td>
			<td>Cole-Parmer</td>
			<td>ZM-07528-30</td>
			<td></td>
		</tr>
		<tr>
			<td>Peristaltic pump head: Masterflex L/S Easy-Load II Pump Head</td>
			<td>Cole-Parmer</td>
			<td>EW-77202-60</td>
			<td></td>
		</tr>
		<tr>
			<td>Rat, Sprague Dawley</td>
			<td>Charles River</td>
			<td>Strain Code: 400</td>
			<td></td>
		</tr>
		<tr>
			<td>Razor blade</td>
			<td>Any hardware or craft store</td>
			<td>Personna 94-120-71 or similar</td>
			<td></td>
		</tr>
		<tr>
			<td>Retinoic acid</td>
			<td>Sigma</td>
			<td>R2625</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotary blades, 28 mm</td>
			<td>Omnigrid</td>
			<td>2046</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotary cutter, 28 mm</td>
			<td>Olfa</td>
			<td>Model 9551</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium deoxycholate (SDC)</td>
			<td>Sigma</td>
			<td>D6750</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium nitrorusside (SNP)</td>
			<td>Sigma</td>
			<td>71778</td>
			<td></td>
		</tr>
		<tr>
			<td>Stopcock, 4-way</td>
			<td>Edwards</td>
			<td>594WSC</td>
			<td></td>
		</tr>
		<tr>
			<td>Suture, 4-0 monofilament polypropylene</td>
			<td>Covidien</td>
			<td>VP-557-X</td>
			<td></td>
		</tr>
		<tr>
			<td>Syringe, 10 mL</td>
			<td>BD</td>
			<td>302995</td>
			<td></td>
		</tr>
		<tr>
			<td>Syringe, 50 mL</td>
			<td>BD</td>
			<td>309653</td>
			<td></td>
		</tr>
		<tr>
			<td>Tissue culture dish, 35 mm</td>
			<td>Falcon</td>
			<td>353001</td>
			<td></td>
		</tr>
		<tr>
			<td>Tissue culture dish, 100 mm</td>
			<td>Corning</td>
			<td>430167</td>
			<td></td>
		</tr>
		<tr>
			<td>Tissue culture plate, 6-well</td>
			<td>Falcon</td>
			<td>353046</td>
			<td></td>
		</tr>
		<tr>
			<td>Tissue culture plate 12-well</td>
			<td>Falcon</td>
			<td>353043</td>
			<td></td>
		</tr>
		<tr>
			<td>Transferrin human</td>
			<td>Sigma</td>
			<td>T8158</td>
			<td></td>
		</tr>
		<tr>
			<td>Tris, 1 M solution, pH 8.0</td>
			<td>AmericanBio</td>
			<td>AB14043-01000</td>
			<td></td>
		</tr>
		<tr>
			<td>Triton X-100</td>
			<td>American Bioanalytical</td>
			<td>AB02025-00500</td>
			<td></td>
		</tr>
		<tr>
			<td>Vibratome, Compresstome VF-300-0Z</td>
			<td>Precisionary Instruments LLC</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Xylazine, 100 mg/mL</td>
			<td>Henry Schein</td>
			<td>NDC: 11695-4022-1</td>
			<td></td>
		</tr>
		<tr>
			<td>Y-connector, 1/16 inch barbed</td>
			<td>Cole-Parmer</td>
			<td>30614-43</td>
			<td></td>
		</tr>
	</tbody>
</table>

engineered lung tissues prepared from decellularized lung slices

There is a need for improved 3-dimensional (3D) lung models that recapitulate the architectural and cellular complexity of the native lung alveolus ex vivo. Recently developed organoid models have facilitated the expansion and study of lung epithelial progenitors in vitro, but these platforms typically rely on mouse tumor-derived matrix and/or serum, and incorporate just one or two cellular lineages. Here, we describe a protocol for generating engineered lung tissues (ELTs) based on the multi-lineage recellularization of decellularized precision-cut lung slices (PCLS). ELTs contain alveolar-like structures comprising alveolar epithelium, mesenchyme, and endothelium, within an extracellular matrix (ECM) substrate closely resembling that of native lung. To generate the tissues, rat lungs are inflated with agarose, sliced into 450 &#181;m-thick slices, cut into strips, and decellularized. The resulting acellular ECM scaffolds are then reseeded with primary endothelial cells, fibroblasts, and alveolar epithelial type 2 cells (AEC2s). AEC2s can be maintained in ELT culture for at least 7 days with a serum-free, chemically-defined growth medium. Throughout the tissue preparation and culture process, the slices are clipped into a cassette system that facilitates handling and standardized cell seeding of multiple ELTs in parallel. These ELTs represent an organotypic culture platform that should facilitate investigations of cell-cell and cell-matrix interactions within the alveolus as well as biochemical signals regulating AEC2s and their niche.

An overview of the process to generate ELTs - comprising lung slicing, slice clipping and decellularization, and scaffold repopulation - is presented in Figure 3. The ELTs presented here were cultured using primary rat lung microvascular endothelial cells (see Table of Materials), neonatal rat AEC2s, and lipofibroblast-enriched neonatal rat lung fibroblasts36. AEC2s were freshly isolated via magnetic bead-based sorting as previously described37; alternative isolation protocols have been detailed and discussed elsewhere38,39,40. Purity of isolated rat AEC2s can be assessed via flow cytometry for rat-specific AEC2 surface marker RTII-7041, or via staining of a cytocentrifuged cell sample for RTII-70 or pro-surfactant protein C (pSPC). Rat lung fibroblasts were isolated from postnatal day 7-9 rat pups according to an adaptation of a published protocol42 and used at passage 1-2; alternative isolation protocols have been described elsewhere43,44. Purity of isolated fibroblasts can be assessed via staining of cultured or cytocentrifuged cells for mesenchymal marker vimentin, and lipofibroblast enrichment can be assessed via staining for Oil Red O45.
When the lung tissue is uniformly inflated with agarose, and tissue pieces strategically selected and oriented for slicing so as to maximize total and parenchymal tissue area, one rat lung may yield tissue for &#62;100 alveolar ELTs. Strips of PCLS exhibit sufficient mechanical integrity to be clipped into tissue cassettes with few (&#60;5%) instances of tearing (Figure 3B).
The protocol for decellularizing lung slices is closely based on our previously published whole lung decellularization protocol, which by quantitative proteomics was demonstrated to preserve many ECM components at levels not significantly different from those in native lung22. Decellularized slice scaffolds preserve the native architecture of the alveoli, as viewed by hematoxylin and eosin (H&#38;E) staining (Figure 4A,B) and by phase contrast microscopy (Figure 4C). We typically exclude scaffolds containing large airways or vessels (Figure 4D) or tears, although the former can be included if they are of interest to the researcher. Decellularization leads to a 96% reduction in tissue DNA content as measured by an assay for double-stranded DNA (see Table of Materials; 0.50 &#181;g/mg &#177; 0.073 &#181;g/mg vs 0.018 &#181;g/mg &#177; 0.0035 &#181;g/mg in native vs decellularized tissue, respectively, mean &#177; SEM) (Figure 5A), with no DNA visible by hematoxylin staining (Figure 4B). Histological and immunofluorescent staining of decellularized scaffolds reveals maintenance of ECM proteins collagen, elastin, collagen IV, and laminin with architecture and quantity similar to that in native lung slices (Figure 5B-E). Note that the nuclei of native tissues stain blue/black with trichome (for collagen) and EVG (for elastin) stains. Immunofluorescent staining was performed as described previously, using standard methods for staining tissues37. The antibodies used and their respective concentrations are listed in Table 4.
Successful scaffold repopulation leads to highly cellular ELTs after 7 days, with an alveolar-like repopulation pattern visible by light microscopy (Figure 6A-C). In some cases, with very high cellularity, organoid-type structures may be visible (Figure 6A,B). Unsuccessful tissue seeding can be visualized by phase-contrast microscopy during culture (Figure 6C). After culturing tissue scaffolds with AEC2s, fibroblasts, and endothelial cells, ELTs are densely repopulated with alveolar-like structures comprising all three cell lineages (Figure 6D,E). At day 7 or 8, AEC2s maintain cuboidal morphology and express surfactant protein-B (SPB) and lamellar body protein ABCA3, without evidence of significant differentiation to AEC1s (Figure 6E,F). AEC2s are highly proliferative in ELTs, as demonstrated by 5-ethynyl-2&#39;-deoxyuridine (EdU) incorporation following a 2 h pulse at 10 &#181;M (Figure 6G).
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/63151/63151fig01.jpg" /> 
Figure 1: Schematic of perfusion system for lung extraction and clearing. (A) The perfusion system comprises a gravity-driven limb, used for initial cannulation of the pulmonary artery under flow; and a pump-driven limb, used to clear the lungs efficiently after initial cannulation. The pump line includes a &#34;pulse dampener&#34; that dampens the spikes in pressure caused by the pump. The design of the tracheal and pulmonary arterial cannulas is detailed at left. SNP = sodium nitroprusside. (B) Details of pulse dampener assembly. BPT and silicone refer to types of tubing. (C) Positions of tracheal and pulmonary arterial cannulas placed during lung extraction. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/63151fig01large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/63151/63151fig02.jpg" /> 
Figure 2: Culture timeline for tri-lineage recellularization. Proposed timeline for tri-lineage ELT seeding and culture, including timing of two-phase seeding. Cell numbers for seeding and culture medium for each phase are indicated. See culture media details in Table 3. AEC2 = alveolar epithelial type 2 cell. EC = endothelial cell. FB = fibroblast. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/63151fig02large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/63151/63151fig03.jpg" /> 
Figure 3: Schematic of engineered lung tissue preparation. (A) Native lung tissue is cut into slices using a vibratome. (B) Precision-cut lung slices are cut into standardized 3 mm wide strips, clipped into polytetrafluorethylene (PTFE) tissue-culture cassettes, and detergent-decellularized to yield acellular extracellular matrix scaffolds. (C) Scaffolds are reseeded in specialized seeding baths that confine the seeding area to the area of the tissue, and then cultured in a standard well plate. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/63151fig03large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 4" class="xfigimg" src="/files/ftp_upload/63151/63151fig04.jpg" /> 
Figure 4: Structure of decellularized lung scaffolds. H&#38;E staining of native (A) and decellularized (B) lung slices showing preservation of alveolar architecture after decellularization. (C,D) Examples of decellularized ECM scaffolds viewed at 5x magnification by phase contrast microscopy, comprising predominately alveolar tissue (C) or containing large branching airways and vessels (D, black and red arrowheads). Scale bars, 50 &#181;m (A,B); 500 &#181;m (C,D). <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/63151fig04large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 5" class="xfigimg" src="/files/ftp_upload/63151/63151fig05.jpg" /> 
Figure 5: DNA removal and matrix preservation in decellularized lung scaffolds. (A) Quantification of DNA in native and decellularized lung slices (mean &#177; SEM, n = 5). Welch&#39;s t test, **P &#60;&#160;0.01. Decell = decellularized. (B,C) Histological staining of native and decellularized lung slices for collagen (B) and elastin (C). Arrowheads, elastin preserved in alveolar entrance rings of decellularized tissue. (D,E) Immunofluorescent staining of native and decellularized lung slices for collagen IV (D) and laminin (E). Scale bars, 50 &#181;m. In all panels, dotted boxes outline the image region that is magnified to the right in each respective panel. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/63151fig05large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 6" class="xfigimg" src="/files/ftp_upload/63151/63151fig06.jpg" /> 
Figure 6: Cellular repopulation of engineered lung tissues. (A-C) Examples of recellularized ELTs on day 7 of culture, as visualized during culture by phase contrast microscopy. The recellularization pattern mirrors the alveolar structure of the tissue. In some areas of high cellularity, organoid-like structures may form (arrowheads). (A) and (B) represent successful cell repopulation, whereas (C) represents a poor level of recellularization after 7 days of culture. (D-G) Staining of recellularized ELTs on day 7 or 8 of culture. (D) H&#38;E staining showing cellular repopulation of the alveolar septa. (E) Immunofluorescent staining labels engrafted proCollagenI&#945;1+ fibroblasts, ABCA3+ AEC2s, and CD31+ endothelial cells. (F) Tissues contain abundant SPB+ AEC2s but few RTI-40 (podoplanin)+ AEC1s under these conditions. (G) Many AEC2s are proliferating in ELTs, as measured by EdU incorporation. Scale bars, 500 &#181;m (A-C); 25 &#181;m (D-G). <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/63151fig06large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Table 1: Decellularization solutions. Preparation details for decellularization solutions. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Table 1 - Decellularization solutions_Revised.xlsx" target="_blank">Please click here to download this Table.</a>
Table 2: Decellularization protocol. Details of protocol for decellularizing lung slices. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Table 2 - Decellularization protocol.xlsx" target="_blank">Please click here to download this Table.</a>
Table 3: Culture media. Preparation details for endothelial and AEC2 growth media. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Table 3 - Culture media.xlsx" target="_blank">Please click here to download this Table.</a>
Table 4: Antibodies used for immunostaining. Details of antibodies and their concentrations used for immunostaining. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Table 4 - Antibodies used for immunostaining.xlsx" target="_blank">Please click here to download this Table.</a>
Supplementary File 1: Design for laser cutting tissue culture cassette frames. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Supplementary File 1.zip" target="_blank">Please click here to download this File.</a>
Supplementary File 2: Design for laser cutting tissue culture cassette clips. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Supplementary File 2.zip" target="_blank">Please click here to download this File.</a>
Supplementary File 3: Design for laser cutting tissue culture cassette tabs. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Supplementary File 3.zip" target="_blank">Please click here to download this File.</a>
Supplementary File 4: CAD file for seeding bath mold base. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Supplementary File 4.zip" target="_blank">Please click here to download this File.</a>
Supplementary File 5: CAD file for seeding bath mold ring. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/63151/Supplementary File 5.zip" target="_blank">Please click here to download this File.</a>

Watch this Scientific Journal Video about Engineered Lung Tissues Prepared from Decellularized Lung Slices at JoVE.com

Engineered Lung Tissues Prepared from Decellularized Lung Slices

This protocol describes a method to generate reproducible, small-scale engineered lung tissues, by repopulating decellularized precision-cut lung slices with alveolar epithelial type 2 cells, fibroblasts, and endothelial cells.

There is a need for improved 3-dimensional (3D) lung models that recapitulate the architectural and cellular complexity of the native lung alveolus ex ...

engineered-lung-tissues-prepared-from-decellularized-lung-slices

Universidad de Cartagena UDEC

Research

JoVE Journal

Bioengineering

3.3K Views.  Yale University. This protocol describes a method to generate reproducible, small-scale engineered lung tissues, by repopulating decellularized precision-cut lung slices with alveolar epithelial type 2 cells, fibroblasts, and endothelial cells.

Video: Engineered Lung Tissues Prepared from Decellularized Lung Slices

Procedure for Lung Engineering

Lung tissue, including lung cancer and chronic lung diseases such as chronic obstructive pulmonary disease, cumulatively account for some 280,000 deaths annually; chronic obstructive pulmonary disease is currently the fourth leading cause of death in the United States1. Contributing to this mortality is the fact that lungs do not generally repair or regenerate beyond the microscopic, cellular level. Therefore, lung tissue that is damaged by degeneration or infection, or lung tissue that is surgically resected is not functionally replaced in vivo. To explore whether lung tissue can be generated in vitro, we treated lungs from adult rats using a procedure that removes cellular components to produce an acellular lung extracellular matrix scaffold. This scaffold retains the hierarchical branching structures of airways and vasculature, as well as a largely intact basement membrane, which comprises collagen IV, laminin, and fibronectin. The scaffold is mounted in a bioreactor designed to mimic critical aspects of lung physiology, such as negative pressure ventilation and pulsatile vascular perfusion. By culturing pulmonary epithelium and vascular endothelium within the bioreactor-mounted scaffold, we are able to generate lung tissue that is phenotypically comparable to native lung tissue and that is able to participate in gas exchange for short time intervals (45-120 minutes). These results are encouraging, and suggest that repopulation of lung matrix is a viable strategy for lung regeneration. This possibility presents an opportunity not only to work toward increasing the supply of lung tissue for transplantation, but also to study respiratory cell and molecular biology in vitro for longer time periods and in a more accurate microenvironment than has previously been possible.

We have developed a decellularized lung extracellular matrix and novel biomimetic bioreactor that can be used to generate functional lung tissue. By seeding cells into the matrix and culturing in the bioreactor, we generate tissue that demonstrates effective gas exchange when transplanted in vivo for short periods of time.

Lung tissue, including lung cancer and chronic lung diseases such as chronic obstructive pulmonary disease, cumulatively account for some 280,000 deaths ...

An Experimental System to Study Mechanotransduction in Fetal Lung Cells

Mechanical forces generated in utero by repetitive breathing-like movements and by fluid distension are critical for normal lung development. A key component of lung development is the differentiation of alveolar type II epithelial cells, the major source of pulmonary surfactant. These cells also participate in fluid homeostasis in the alveolar lumen, host defense, and injury repair. In addition, distal lung parenchyma cells can be directly exposed to exaggerated stretch during mechanical ventilation after birth. However, the precise molecular and cellular mechanisms by which lung cells sense mechanical stimuli to influence lung development and to promote lung injury are not completely understood. Here, we provide a simple and high purity method to isolate type II cells and fibroblasts from rodent fetal lungs. Then, we describe an in vitro system, The Flexcell Strain Unit, to provide mechanical stimulation to fetal cells, simulating mechanical forces in fetal lung development or lung injury. This experimental system provides an excellent tool to investigate molecular and cellular mechanisms in fetal lung cells exposed to stretch. Using this approach, our laboratory has identified several receptors and signaling proteins that participate in mechanotransduction in fetal lung development and lung injury.

Mechanical forces play a key role in lung development and lung injury. Here, we describe a method to isolate rodent fetal lung type II epithelial cells and fibroblasts and to expose them to mechanical stimulation using an in vitro system.

Mechanical forces generated in utero by repetitive breathing-like movements and by fluid distension are critical for normal lung development. A key ...

Construction of Defined Human Engineered Cardiac Tissues to Study Mechanisms of Cardiac Cell Therapy

Human cardiac tissue engineering can fundamentally impact therapeutic discovery through the development of new species-specific screening systems that replicate the biofidelity of three-dimensional native human myocardium, while also enabling a controlled level of biological complexity, and allowing non-destructive longitudinal monitoring of tissue contractile function. Initially, human engineered cardiac tissues (hECT) were created using the entire cell population obtained from directed differentiation of human pluripotent stem cells, which typically yielded less than 50% cardiomyocytes. However, to create reliable predictive models of human myocardium, and to elucidate mechanisms of heterocellular interaction, it is essential to accurately control the biological composition in engineered tissues. 
To address this limitation, we utilize live cell sorting for the cardiac surface marker SIRP&#945; and the fibroblast marker CD90 to create tissues containing a 3:1 ratio of these cell types, respectively, that are then mixed together and added to a collagen-based matrix solution. Resulting hECTs are, thus, completely defined in both their cellular and extracellular matrix composition.
Here we describe the construction of defined hECTs as a model system to understand mechanisms of cell-cell interactions in cell therapies, using an example of human bone marrow-derived mesenchymal stem cells (hMSC) that are currently being used in human clinical trials. The defined tissue composition is imperative to understand how the hMSCs may be interacting with the endogenous cardiac cell types to enhance tissue function. A bioreactor system is also described that simultaneously cultures six hECTs in parallel, permitting more efficient use of the cells after sorting.

This manuscript describes the creation of defined engineered cardiac tissues using surface marker expression and cell sorting. The defined tissues can then be used in a multi-tissue bioreactor to investigate mechanisms of cardiac cell therapy in order to provide a functional, yet controlled, model system of the human heart.

Human cardiac tissue engineering can fundamentally impact therapeutic discovery through the development of new species-specific screening systems that ...

A Combined 3D Tissue Engineered In Vitro/In Silico Lung Tumor Model for Predicting Drug Effectiveness in Specific Mutational Backgrounds

In the present study, we combined an in vitro 3D lung tumor model with an in silico model to optimize predictions of drug response based on a specific mutational background. The model is generated on a decellularized porcine scaffold that reproduces tissue-specific characteristics regarding extracellular matrix composition and architecture including the basement membrane. We standardized a protocol that allows artificial tumor tissue generation within 14 days including three days of drug treatment. Our article provides several detailed descriptions of 3D read-out screening techniques like the determination of the proliferation index Ki67 staining&#39;s, apoptosis from supernatants by M30-ELISA and assessment of epithelial to mesenchymal transition (EMT), which are helpful tools for evaluating the effectiveness of therapeutic compounds. We could show compared to 2D culture a reduction of proliferation in our 3D tumor model that is related to the clinical situation. Despite of this lower proliferation, the model predicted EGFR-targeted drug responses correctly according to the biomarker status as shown by comparison of the lung carcinoma cell lines HCC827 (EGFR -mutated, KRAS wild-type) and A549 (EGFR wild-type, KRAS-mutated) treated with the tyrosine-kinase inhibitor (TKI) gefitinib. To investigate drug responses of more advanced tumor cells, we induced EMT by long-term treatment with TGF-beta-1 as assessed by vimentin/pan-cytokeratin immunofluorescence staining. A flow-bioreactor was employed to adjust culture to physiological conditions, which improved tissue generation. Furthermore, we show the integration of drug responses upon gefitinib treatment or TGF-beta-1 stimulation - apoptosis, proliferation index and EMT - into a Boolean in silico model. Additionally, we explain how drug responses of tumor cells with a specific mutational background and counterstrategies against resistance can be predicted. We are confident that our 3D in vitro approach especially with its in silico expansion provides an additional value for preclinical drug testing in more realistic conditions than in 2D cell culture.

A Combined 3D Tissue Engineered In Vitro/In Silico Lung Tumor Model for Predicting Drug Effectiveness in Specific Mutational Backgrounds

We present a three-dimensional (3D) lung cancer model based on a biological collagen scaffold to study sensitivity towards non-small-cell-lung-cancer-(NSCLC)-targeted therapies. We demonstrate different read-out techniques to determine the proliferation index, apoptosis and epithelial-mesenchymal transition (EMT) status. Collected data are integrated into an in silico model for prediction of drug sensitivity.

In the present study, we combined an in vitro 3D lung tumor model with an in silico model to optimize predictions of drug response based on a specific ...

Generation of ESC-derived Mouse Airway Epithelial Cells Using Decellularized Lung Scaffolds

Lung lineage differentiation requires integration of complex environmental cues that include growth factor signaling, cell-cell interactions and cell-matrix interactions. Due to this complexity, recapitulation of lung development in vitro to promote differentiation of stem cells to lung epithelial cells has been challenging. In this protocol, decellularized lung scaffolds are used to mimic the 3-dimensional environment of the lung and generate stem cell-derived airway epithelial cells. Mouse embryonic stem cell are first differentiated to the endoderm lineage using an embryoid body (EB) culture method with activin A. Endoderm cells are then seeded onto decellularized scaffolds and cultured at air-liquid interface for up to 21 days. This technique promotes differentiation of seeded cells to functional airway epithelial cells (ciliated cells, club cells, and basal cells) without additional growth factor supplementation. This culture setup is defined, serum-free, inexpensive, and reproducible. Although there is limited contamination from non-lung endoderm lineages in culture, this protocol only generates airway epithelial populations and does not give rise to alveolar epithelial cells. Airway epithelia generated with this protocol can be used to study cell-matrix interactions during lung organogenesis and for disease modeling or drug-discovery platforms of airway-related pathologies such as cystic fibrosis.

This protocol efficiently directs mouse embryonic stem cell-derived definitive endoderm to mature airway epithelial cells. This differentiation technique uses 3-dimensional decellularized lung scaffolds to direct lung lineage specification, in a defined, serum-free culture setting.

Lung lineage differentiation requires integration of complex environmental cues that include growth factor signaling, cell-cell interactions and ...

Intra-cardiac Side-Firing Light Catheter for Monitoring Cellular Metabolism using Transmural Absorbance Spectroscopy of Perfused Mammalian Hearts

Absorbance spectroscopy of cardiac muscle provides non-destructive assessment of cytosolic and mitochondrial oxygenation via myoglobin and cytochrome absorbance respectively. In addition, numerous aspects of the mitochondrial metabolic status such as membrane potential and substrate entry can also be estimated. To perform cardiac wall transmission optical spectroscopy, a commercially available side-firing optical fiber catheter is placed in the left ventricle of the isolated perfused heart as a light source. Light passing through the heart wall is collected with an external optical fiber to perform optical spectroscopy of the heart in near real- time. The transmission approach avoids numerous surface scattering interference occurring in widely used reflection approaches. Changes in transmural absorbance spectra were deconvolved using a library of chromophore reference spectra, providing quantitative measures of all the known cardiac chromophores simultaneously. This spectral deconvolution approach eliminated intrinsic errors that may result from using common dual wavelength methods applied to overlapping absorbance spectra, as well as provided a quantitative evaluation of the goodness of fit. A custom program was designed for data acquisition and analysis, which permitted the investigator to monitor the metabolic state of the preparation during the experiment. These relatively simple additions to the standard heart perfusion system provide a unique insight into the metabolic state of the heart wall in addition to conventional measures of contraction, perfusion, and substrate/oxygen extraction.

Here we introduce a method for using an intra-ventricle optical catheter in perfused hearts to perform absorbance spectroscopy across the heart wall. The data obtained provides robust information on tissue oxygen tension as well as substrate utilization and membrane potential simultaneously with cardiac performance measures in this ubiquitous preparation.

Absorbance spectroscopy of cardiac muscle provides non-destructive assessment of cytosolic and mitochondrial oxygenation via myoglobin and cytochrome ...

Preparation of Mesh-Shaped Engineered Cardiac Tissues Derived from Human iPS Cells for In Vivo Myocardial Repair

The current protocol describes methods to generate scalable, mesh-shaped engineered cardiac tissues (ECTs) composed of cardiovascular cells derived from human induced pluripotent stem cells (hiPSCs), which are developed towards the goal of clinical use. HiPSC-derived cardiomyocytes, endothelial cells, and vascular mural cells are mixed with gel matrix and then poured into a polydimethylsiloxane (PDMS) tissue mold with rectangular internal staggered posts. By culture day 14 ECTs mature into a 1.5 cm x 1.5 cm mesh structure with 0.5 mm diameter myofiber bundles. Cardiomyocytes align to the long-axis of each bundle and spontaneously beat synchronously. This approach can be scaled up to a larger (3.0 cm x 3.0 cm) mesh ECT while preserving construct maturation and function. Thus, mesh-shaped ECTs generated from hiPSC-derived cardiac cells may be feasible for cardiac regeneration paradigms.

The present protocol generates mesh-shaped engineered cardiac tissues containing cardiovascular cells derived from human induced pluripotent stem cells to allow the investigation of cell implantation therapy for heart diseases.

The current protocol describes methods to generate scalable, mesh-shaped engineered cardiac tissues (ECTs) composed of cardiovascular cells derived from ...

Evaluating Regional Pulmonary Deposition using Patient-Specific 3D Printed Lung Models

Development of targeted therapies for pulmonary diseases is limited by the availability of preclinical testing methods with the ability to predict regional aerosol delivery. Leveraging 3D printing to generate patient-specific lung models, we outline the design of a high-throughput, in vitro experimental setup for quantifying lobular pulmonary deposition. This system is made with a combination of commercially available and 3D printed components and allows the flow rate through each lobe of the lung to be independently controlled. Delivery of fluorescent aerosols to each lobe is measured using fluorescence microscopy. This protocol has the potential to promote the growth of personalized medicine for respiratory diseases through its ability to model a wide range of patient demographics and disease states. Both the geometry of the 3D printed lung model and the air flow profile setting can be easily modulated to reflect clinical data for patients with varying age, race, and gender. Clinically relevant drug delivery devices, such as the endotracheal tube shown here, can be incorporated into the testing setup to more accurately predict a device&#8217;s capacity to target therapeutic delivery to a diseased region of the lung. The versatility of this experimental setup allows it to be customized to reflect a multitude of inhalation conditions, enhancing the rigor of preclinical therapeutic testing.

We present a high-throughput, in vitro method for quantifying regional pulmonary deposition at the lobe level using CT scan-derived, 3D printed lung models with tunable air flow profiles.

Development of targeted therapies for pulmonary diseases is limited by the availability of preclinical testing methods with the ability to predict ...

Fibroblast Derived Human Engineered Connective Tissue for Screening Applications

Fibroblasts are phenotypically highly dynamic cells, which quickly transdifferentiate into myofibroblasts in response to biochemical and biomechanical stimuli. The current understanding of fibrotic processes, including cardiac fibrosis, remains poor, which hampers the development of new anti-fibrotic therapies. Controllable and reliable human model systems are crucial for a better understanding of fibrosis pathology. This is a highly reproducible and scalable protocol to generate engineered connective tissues (ECT) in a 48-well casting plate to facilitate studies of fibroblasts and the pathophysiology of fibrotic tissue in a 3-dimensional (3D) environment. ECT are generated around the poles with tunable stiffness, allowing for studies under a defined biomechanical load. Under the defined loading conditions, phenotypic adaptations controlled by cell-matrix interactions can be studied. Parallel testing is feasible in the 48-well format with the opportunity for the time-course analysis of multiple parameters, such as tissue compaction and contraction against the load. From these parameters, biomechanical properties such as tissue stiffness and elasticity can be studied.

Presented here is a protocol to generate engineered connective tissues for a parallel culture of 48 tissues in a multi-well plate with double poles, suitable for mechanistic studies, disease modeling, and screening applications. The protocol is compatible with fibroblasts from different organs and species and is exemplified here with human primary cardiac fibroblasts.

Fibroblasts are phenotypically highly dynamic cells, which quickly transdifferentiate into myofibroblasts in response to biochemical and biomechanical ...

Preclinical Drug Testing in Scalable 3D Engineered Muscle Tissues

Accurately modeling healthy and disease conditions in vitro is vital for the development of new treatment strategies and therapeutics. For cardiac and skeletal muscle diseases, contractile force and kinetics constitute key metrics for assessing muscle function. New and improved methods for generating engineered muscle tissues (EMTs) from induced pluripotent stem cells have made in vitro disease modeling more reliable for contractile tissues; however, reproducibly fabricating tissues from suspended cell cultures and measuring their contractility is challenging. Such techniques are often plagued with high failure rates and require complex instrumentation and customized data analysis routines. A new platform and device that utilizes 3D EMTs in conjunction with a label-free, highly-parallel, and automation-friendly contractility assay circumvent many of these obstacles. The platform enables facile and reproducible fabrication of 3D EMTs using virtually any cell source. Tissue contractility is then measured via an instrument that simultaneously measures 24 tissues without the need for complex software analysis routines. The instrument can reliably measure micronewton changes in force, allowing for dose-dependent compound screening to measure the effect of a drug or therapeutic on contractile output. Engineered tissues made with this device are fully functional, generating twitch and tetanic contractions upon electrical stimulation, and can be analyzed longitudinally in culture over weeks or months. Here, we show data from cardiac muscle EMTs under acute and chronic dosing with known toxicants, including a drug (BMS-986094) that was pulled from clinical trials after patient fatalities due to unanticipated cardiotoxicity. Altered skeletal muscle function in engineered tissues in response to treatment with a myosin inhibitor is also presented. This platform enables the researcher to integrate complex, information-rich bioengineered model systems into their drug discovery workflow with minimal additional training or skills required.

This protocol provides methods for generating 3D engineered cardiac and skeletal muscle tissues and describes their use in preclinical drug screening modalities. The described methods utilize a magnetic sensing system to facilitate the simultaneous assessment of 24 tissues in parallel.

Accurately modeling healthy and disease conditions in vitro is vital for the development of new treatment strategies and therapeutics. For cardiac and ...

Engineered Lung Tissues Prepared from Decellularized Lung Slices

Summary

Explore More Videos

Chapters in this video

Procedure for Lung Engineering

An Experimental System to Study Mechanotransduction in Fetal Lung Cells

Construction of Defined Human Engineered Cardiac Tissues to Study Mechanisms of Cardiac Cell Therapy

A Combined 3D Tissue Engineered In Vitro/In Silico Lung Tumor Model for Predicting Drug Effectiveness in Specific Mutational Backgrounds

Generation of ESC-derived Mouse Airway Epithelial Cells Using Decellularized Lung Scaffolds

Intra-cardiac Side-Firing Light Catheter for Monitoring Cellular Metabolism using Transmural Absorbance Spectroscopy of Perfused Mammalian Hearts

Preparation of Mesh-Shaped Engineered Cardiac Tissues Derived from Human iPS Cells for In Vivo Myocardial Repair

Evaluating Regional Pulmonary Deposition using Patient-Specific 3D Printed Lung Models

Fibroblast Derived Human Engineered Connective Tissue for Screening Applications

Preclinical Drug Testing in Scalable 3D Engineered Muscle Tissues