Ran Tao, ABD Ticaret Bakanlığı Ulusal Standartlar ve Teknoloji Enstitüsü'nün 70NANB15H112 hibesi kapsamında sağladığı fonlara teşekkür eder. Aaron M. Forster'ın finansmanı, Ulusal Standartlar ve Teknoloji Enstitüsü'ne kongre ödenekleri yoluyla sağlandı.

<ol>
	<li>Macosko, C. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Rheology: principles, measurements, and applications. , (1994).</li><li>Larson, R. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The Structure and Rheology of Complex Fluids. , (1999).</li><li>Vermant, J., Moldenaers, P., Mewis, J., Ellis, M., Garritano, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Orthogonal+superposition+measurements+using+a+rheometer+equipped+with+a+force+rebalanced+transducer.">Orthogonal superposition measurements using a rheometer equipped with a force rebalanced transducer.</a> Review of Scientific Instruments. 68 (11), 4090-4096 (1997).</li><li>Ferry, J. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Viscoelastic Properties of Polymers. , (1980).</li><li>Yamamoto, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rate-dependent+relaxation+spectra+and+their+determination.">Rate-dependent relaxation spectra and their determination.</a> Transactions of the Society of Rheology. 15 (2), 331-344 (1971).</li><li>Simmons, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+servo-controlled+rheometer+for+measurement+of+the+dynamic+modulus+of+viscoelastic+liquids.">A servo-controlled rheometer for measurement of the dynamic modulus of viscoelastic liquids.</a> Journal of Scientific Instruments. 43 (12), 887-892 (1966).</li><li>Tanner, R. I., Williams, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+the+orthogonal+superposition+of+simple+shearing+and+small-strain+oscillatory+motions.">On the orthogonal superposition of simple shearing and small-strain oscillatory motions.</a> Rheologica Acta. 10 (4), 528-538 (1971).</li><li>Schoukens, G., Mewis, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nonlinear+rheological+behaviour+and+shear-dependent+structure+in+colloidal+dispersions.">Nonlinear rheological behaviour and shear-dependent structure in colloidal dispersions.</a> Journal of Rheology. 22 (4), 381-394 (1978).</li><li>Zeegers, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+sensitive+dynamic+viscometer+for+measuring+the+complex+shear+modulus+in+a+steady+shear+flow+using+the+method+of+orthogonal+superposition.">A sensitive dynamic viscometer for measuring the complex shear modulus in a steady shear flow using the method of orthogonal superposition.</a> Rheologica Acta. 34 (6), 606-621 (1995).</li><li>Mewis, J., Schoukens, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+spectroscopy+of+colloidal+dispersions.">Mechanical spectroscopy of colloidal dispersions.</a> Faraday Discussions of the Chemical Society. 65, 58-64 (1978).</li><li>Lin, N. Y. C., Ness, C., Cates, M. E., Sun, J., Cohen, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tunable+shear+thickening+in+suspensions.">Tunable shear thickening in suspensions.</a> Proceedings of the National Academy of Sciences. 113 (39), 10774-10778 (2016).</li><li>Gracia-Fern&#225;ndez, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+application+of+electro+and+orthogonal+superposition+rheology+on+a+starch/silicone+oil+suspension.">Simultaneous application of electro and orthogonal superposition rheology on a starch/silicone oil suspension.</a> Journal of Rheology. 60 (1), 121-127 (2015).</li><li>Sung, S. H., Kim, S., Hendricks, J., Clasen, C., Ahn, K. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Orthogonal+superposition+rheometry+of+colloidal+gels:+time-shear+rate+superposition.">Orthogonal superposition rheometry of colloidal gels: time-shear rate superposition.</a> Soft Matter. 14 (42), 8651-8659 (2018).</li><li>Colombo, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Superposition+rheology+and+anisotropy+in+rheological+properties+of+sheared+colloidal+gels.">Superposition rheology and anisotropy in rheological properties of sheared colloidal gels.</a> Journal of Rheology. 61 (5), 1035-1048 (2017).</li><li>Jacob, A. R., Poulos, A. S., Kim, S., Vermant, J., Petekidis, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Convective+Cage+Release+in+Model+Colloidal+Glasses.">Convective Cage Release in Model Colloidal Glasses.</a> Physical Review Letters. 115 (21), 218301 (2015).</li><li>Jacob, A. R., Poulos, A. S., Semenov, A. N., Vermant, J., Petekidis, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flow+dynamics+of+concentrated+starlike+micelles:+A+superposition+rheometry+investigation+into+relaxation+mechanisms.">Flow dynamics of concentrated starlike micelles: A superposition rheometry investigation into relaxation mechanisms.</a> Journal of Rheology. 63 (4), 641-653 (2019).</li><li>Moghimi, E., Vermant, J., Petekidis, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Orthogonal+superposition+rheometry+of+model+colloidal+glasses+with+short-ranged+attractions.">Orthogonal superposition rheometry of model colloidal glasses with short-ranged attractions.</a> Journal of Rheology. 63 (4), 533-546 (2019).</li><li>Tao, R., Forster, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=End+effect+correction+for+orthogonal+small+strain+oscillatory+shear+in+a+rotational+shear+rheometer.">End effect correction for orthogonal small strain oscillatory shear in a rotational shear rheometer.</a> Rheologica Acta. 59 (2), 95-108 (2020).</li><li>Schrag, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deviation+of+velocity+gradient+profiles+from+the+"gap+loading"+and+"surface+loading"+limits+in+dynamic+simple+shear+experiments.">Deviation of velocity gradient profiles from the "gap loading" and "surface loading" limits in dynamic simple shear experiments.</a> Transactions of the Society of Rheology. 21 (3), 399-413 (1977).</li><li>Ewoldt, R. H., Johnston, M. T., Caretta, L. M., Spagnolie, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Complex Fluids in Biological Systems. Biological and Medical Physics, Biomedical Engineering. , 207-241 (2015).</li></ol>

Bu makalede kullanılan prosedürlerin tam açıklaması, belirli ticari ürünlerin ve tedarikçilerinin tanımlanmasını gerektirir. Bu tür bilgilerin dahil edilmesi, hiçbir şekilde, bu tür ürünlerin veya tedarikçilerin NIST tarafından onaylandığını veya NIST tarafından önerildiğini veya açıklanan amaçlar için mutlaka en iyi malzemeler, araçlar, yazılımlar veya tedarikçiler olduklarını gösterdiği şeklinde yorumlanmamalıdır.

Bu protokolde, çift cidarlı konsantrik silindir geometrisine sahip ticari bir ortogonal süperpozisyon reoloji tekniği için Newton sıvılarını kullanarak viskozite kalibrasyon ölçümleri yapmak için ayrıntılı bir deneysel prosedür sunuyoruz. Kalibrasyon faktörleri, yani birincil son etki faktörü C L ve ortogonal son etki faktörü CLo, sabit kesme hızı süpürme ve ortogonal frekans süpürme testleri yapılarak bağımsız olarak belirlenir. So...

Karmaşık sıvıların reolojik özelliklerini anlamak, güvenilir ve tekrarlanabilir ürünlerin geliştirilmesi ve üretilmesi için birçok endüstri için gereklidir1. Bu "karmaşık sıvılar", günlük yaşamımızda, örneğin kişisel bakım ürünlerinde, gıdalarda, kozmetiklerde ve ev ürünlerinde yaygın olarak bulunan süspansiyonları, polimerik sıvıları ve köpükleri içerir. Reolojik veya akış özellikleri (örneğin, viskozite), son kullanım ve işlenebilirlik için performans metriklerinin oluşturulmasında önemli miktarlardır, ancak akış özellikleri, karmaşık akışkanlar içinde bulunan mikro yapılarla birbirine bağlıdır. Karmaşık sıvıların onları basit sıvılardan ayıran belirgin bir özelliği, çoklu uzunluk ölçeklerini kapsayan çeşitli mikro yapılara sahip olmalarıdır2. Bu mikro yapılar, makroskopik özelliklerinde değişikliklere neden olan farklı akış koşullarından kolayca etkilenebilir. Akış ve deformasyona yanıt olarak karmaşık akışkanların doğrusal olmayan viskoelastik davranışı yoluyla bu yapı-özellik döngüsünün kilidini açmak, deneysel reologlar için zorlu bir görev olmaya devam etmektedir.
Ortogonal süperpozisyon (OSP) reolojisi3 , bu ölçüm zorluğunu ele almak için sağlam bir tekniktir. Bu teknikte, küçük bir genlikli salınımlı kesme akışı, tek yönlü bir birincil kararlı kesme akışına ortogonal olarak üst üste bindirilir, bu da uygulanan birincil kesme akışı altında viskoelastik bir gevşeme spektrumunun eşzamanlı olarak ölçülmesini sağlar. Daha spesifik olmak gerekirse, küçük salınımlı kesme pertürbasyonu, doğrusal viskoelastisite4'teki teoriler kullanılarak analiz edilebilirken, doğrusal olmayan akış koşulu birincil kararlı kesme akışı ile elde edilir. İki akış alanı ortogonal olduğundan ve bu nedenle bağlanmadığından, pertürbasyon spektrumları, birincil doğrusal olmayan akış5 altındaki mikroyapının varyasyonu ile doğrudan ilişkili olabilir. Bu gelişmiş ölçüm tekniği, formülasyonlarını, işlemelerini ve uygulamalarını optimize etmek için karmaşık sıvılardaki yapı-özellik-işleme ilişkilerini aydınlatma fırsatı sunar.
Modern OSP reolojisinin uygulanması ani bir epifaninin sonucu değildi; daha ziyade, onlarca yıllık özel cihazların geliştirilmesine dayanmaktadır. İlk özel yapım OSP aparatıSimmons 6 tarafından 1966 yılına kadar uzanıyor ve bundan sonra 7,8,9,10 gibi birçok çaba sarf edildi. Bu erken özel yapım cihazlar, hizalama sorunları, pompalama akış etkisi (ortogonal salınım sağlamak için bob'un eksenel hareketi nedeniyle) ve cihaz hassasiyetinin sınırları gibi birçok dezavantajdan muzdariptir. 1997 yılında, Vermant ve ark.3, önceki cihazlardan daha geniş bir viskozite aralığına sahip sıvılar için OSP ölçümlerini sağlayan ticari ayrı bir motor-transdüser reometresi üzerindeki kuvvet yeniden dengeleme dönüştürücüsünü (FRT) değiştirdi. Bu modifikasyon, normal kuvvet yeniden dengeleme dönüştürücüsünün gerilim kontrollü bir reometre olarak işlev görmesini sağlar ve eksenel kuvvetin ölçümüne ek olarak eksenel bir salınım uygular. Son zamanlarda, OSP ölçümleri için gerekli geometriler, Vermant'ın metodolojisinden sonra, ticari ayrı bir motor-transdüser reometresi için serbest bırakılmıştır.
Ticari OSP reolojisinin ortaya çıkmasından bu yana, bu tekniğin çeşitli karmaşık sıvıların araştırılması için uygulanmasına artan bir ilgi vardır. Örnek olarak kolloidal süspansiyonlar 11,12, kolloidal jeller13,14 ve gözlükler15,16,17 verilebilir. Ticari cihazın mevcudiyeti OSP araştırmasını teşvik ederken, karmaşık OSP geometrisi, ölçümün diğer rutin reolojik tekniklerden daha iyi anlaşılmasını gerektirir. OSP akış hücresi, çift cidarlı eşmerkezli silindir (veya Couette) geometrisine dayanır. Sıvının dairesel boşluklar ve rezervuar arasında ileri geri akmasını sağlamak için açık üst ve açık alt tasarıma sahiptir. Üretici tarafından geometri tasarımında yapılan optimizasyona rağmen, OSP operasyonu sırasında akışkan homojen olmayan bir akış alanı, geometrik son etkiler ve artık pompalama akışı yaşar ve bunların hepsi önemli deneysel hatalara neden olabilir. Önceki çalışmamız18, bu teknik için Newton sıvılarını kullanan önemli son etki düzeltme prosedürlerini bildirmiştir. Doğru viskozite sonuçları elde etmek için, hem primer hem de ortogonal yönlerde uygun son etki faktörleri uygulanmalıdır. Bu protokolde, OSP reolojik tekniği için ayrıntılı bir kalibrasyon metodolojisi sunmayı ve ölçüm hatalarını azaltmak için en iyi uygulamalar için önerilerde bulunmayı amaçlıyoruz. Bu yazıda OSP geometri kurulumu, numune yükleme ve OSP test ayarları ile ilgili olarak açıklanan prosedürler, Newton dışı akışkan ölçümleri için kolayca benimsenebilir ve tercüme edilebilir olmalıdır. Kullanıcıların, herhangi bir sıvı sınıflandırmasında (Newton veya Newton olmayan) OSP ölçümlerinden önce uygulamaları için son etki düzeltme faktörlerini belirlemek üzere burada açıklanan kalibrasyon prosedürlerini kullanmalarını tavsiye ederiz. Son faktörler için kalibrasyon prosedürlerinin daha önce bildirilmediğini unutmayın. Bu makalede sağlanan protokol ayrıca, genel olarak doğru reolojik ölçümlerin nasıl yapılacağına dair adım adım kılavuz ve ipuçlarını ve reometre kullanıcıları tarafından göz ardı edilebilecek "ham" verilere karşı "ölçülen" verilerin anlaşılmasına ilişkin teknik kaynağı açıklamaktadır.

<table><tbody><tr><td>Advanced Peltier System</td><td>TA Instruments</td><td>402500.901</td><td>Enviromental control device</td></tr><tr><td>ARES-G2 Rheometer</td><td>TA Instruments</td><td>401000.501</td><td>Rheometer</td></tr><tr><td>Brookfield Silicone Fluid, 12500cP</td><td>AMTEK Brookfield</td><td>12500 cps</td><td>Viscosity standard liquid</td></tr><tr><td>OSP Slotted Bob, 33 mm</td><td>TA Instruments</td><td>402796.902</td><td>Bob, upper geometry</td></tr><tr><td>OSP Slotted Double Gap Cup, 34 mm</td><td>TA Instruments</td><td>402782.901</td><td>Double wall cup, lower geometry</td></tr><tr><td>Pipette (1 &amp;ndash; 10 mL)</td><td>Eppendorf</td><td>3120000089</td><td>To load test materials</td></tr><tr><td>Pipette (100 &amp;ndash; 1,000 &amp;micro;L)</td><td>Eppendorf</td><td>3123000063</td><td>To load test materials</td></tr><tr><td>Pipette Tips (0.5 &amp;ndash; 10 mL)</td><td>Eppendorf</td><td>022492098</td><td>To load test materials</td></tr><tr><td>Pipette Tips (50 &amp;ndash; 1,000 &amp;micro;L)</td><td>Eppendorf</td><td>022491555</td><td>To load test materials</td></tr><tr><td>Spatula</td><td>VWR</td><td>82027-532</td><td>To load test materials</td></tr><tr><td>TRIOS</td><td>TA Instruments</td><td>v4.3.1.39215</td><td>Rheometer software</td></tr></tbody></table>

calibration procedures for orthogonal superposition rheology

Ortogonal süperpozisyon (OSP) reolojisi, küçük genlikli salınımlı bir kesme deformasyonunun ortogonal olarak birincil kesme akışına üst üste bindirilmesini içeren gelişmiş bir reolojik tekniktir. Bu teknik, karmaşık akışkanların yapısal dinamiklerinin doğrusal olmayan akış koşulları altında ölçülmesine izin verir, bu da çok çeşitli karmaşık akışkanların performansının anlaşılması ve tahmin edilmesi için önemlidir. OSP reolojik tekniği, 1960'lardan bu yana, özellikle bu tekniğin gücünü vurgulayan özel yapım cihazlar aracılığıyla uzun bir gelişim geçmişine sahiptir. OSP tekniği artık reoloji topluluğu için ticari olarak mevcuttur. OSP geometrisinin karmaşık tasarımı ve ideal olmayan akış alanı göz önüne alındığında, kullanıcılar ölçüm hatasının büyüklüğünü ve kaynaklarını anlamalıdır. Bu çalışma, ölçüm hatalarını azaltmak için en iyi uygulamalar için öneriler içeren Newton sıvılarını kullanan kalibrasyon prosedürlerini sunmaktadır. Özellikle, son etki faktörü belirleme yöntemi, numune doldurma prosedürü ve uygun ölçüm aralığının tanımlanması (örneğin, kesme hızı, frekans vb.) hakkında ayrıntılı bilgi verilmektedir.

12.2 Pa s silikon viskozite standardındaki viskozite kalibrasyon ölçümlerinden elde edilen temsili sonuçlar Şekil 5 ve Şekil 6'da gösterilmiştir. Kalibrasyon çalışmaları için birincil son etki faktörünün ve ortogonal son etki faktörünün her ikisinin de 1,00 olarak ayarlandığını unutmayın. Şekil 5, çift y eksenli bir grafikte kesme hızının bir fonksiyonu olarak sabit kesme viskozitesini ve torku gösterm...

Watch this Scientific Journal Video about Calibration Procedures for Orthogonal Superposition Rheology at JoVE.com

Calibration Procedures for Orthogonal Superposition Rheology

Newton sıvılarını kullanan ticari bir ortogonal süperpozisyon reolojisi tekniği için, son etki düzeltme faktörü belirleme yöntemleri ve deneysel hatayı azaltmak için en iyi uygulamalar için öneriler de dahil olmak üzere ayrıntılı bir kalibrasyon protokolü sunuyoruz.

Ortogonal Süperpozisyon Reolojisi için Kalibrasyon Prosedürleri

Orthogonal superposition (OSP) rheology is an advanced rheological technique that involves superimposing a small-amplitude oscillatory shear deformation ...

calibration-procedures-for-orthogonal-superposition-rheology

Universidad de Cartagena UDEC

Research

JoVE Journal

Engineering

2.0K Görüntüleme.  National Institute of Standards and Technology. Newton sıvılarını kullanan ticari bir ortogonal süperpozisyon reolojisi tekniği için, son etki düzeltme faktörü belirleme yöntemleri ve deneysel hatayı azaltmak için en iyi uygulamalar için öneriler de dahil olmak üzere ayrıntılı bir kalibrasyon protokolü sunuyoruz.

Video: Calibration Procedures for Orthogonal Superposition Rheology

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions

A rheometer system to measure the rheology of crude oil in equilibrium with carbon dioxide (CO2) at high temperatures and pressures is described. The system comprises a high-pressure rheometer which is connected to a circulation loop. The rheometer has a rotational flow-through measurement cell with two alternative geometries: coaxial cylinder and double gap. The circulation loop contains a mixer, to bring the crude oil sample into equilibrium with CO2, and a gear pump that transports the mixture from the mixer to the rheometer and recycles it back to the mixer. The CO2 and crude oil are brought to equilibrium by stirring and circulation and the rheology of the saturated mixture is measured by the rheometer. The system is used to measure the rheological properties of Zuata crude oil (and its toluene dilution) in equilibrium with CO2 at elevated pressures up to 220 bar and a temperature of 50 &#176;C. The results show that CO2 addition changes the oil rheology significantly, initially reducing the viscosity as the CO2 pressure is increased and then increasing the viscosity above a threshold pressure. The non-Newtonian response of the crude is also seen to change with the addition of CO2.

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions

A method for measuring the rheology of crude oil in equilibrium with carbon dioxide at reservoir conditions is presented.

Ham Petrol Reolojisinin CO İle Dengesinde Ölçümü<sub&gt; 2</sub&gt; Rezervuar Koşullarında

A rheometer system to measure the rheology of crude oil in equilibrium with carbon dioxide (CO2) at high temperatures and pressures is described. The ...

Çevre

Dielectric RheoSANS &#8212; Simultaneous Interrogation of Impedance, Rheology and Small Angle Neutron Scattering of Complex Fluids

A procedure for the operation of a new dielectric RheoSANS instrument capable of simultaneous interrogation of the electrical, mechanical and microstructural properties of complex fluids is presented. The instrument consists of a Couette geometry contained within a modified forced convection oven mounted on a commercial rheometer. This instrument is available for use on the small angle neutron scattering (SANS) beamlines at the National Institute of Standards and Technology (NIST) Center for Neutron Research (NCNR). The Couette geometry is machined to be transparent to neutrons and provides for measurement of the electrical properties and microstructural properties of a sample confined between titanium cylinders while the sample undergoes arbitrary deformation. Synchronization of these measurements is enabled through the use of a customizable program that monitors and controls the execution of predetermined experimental protocols. Described here is a protocol to perform a flow sweep experiment where the shear rate is logarithmically stepped from a maximum value to a minimum value holding at each step for a specified period of time while frequency dependent dielectric measurements are made. Representative results are shown from a sample consisting of a gel composed of carbon black aggregates dispersed in propylene carbonate. As the gel undergoes steady shear, the carbon black network is mechanically deformed, which causes an initial decrease in conductivity associated with the breaking of bonds comprising the carbon black network. However, at higher shear rates, the conductivity recovers associated with the onset of shear thickening. Overall, these results demonstrate the utility of the simultaneous measurement of the rheo-electro-microstructural properties of these suspensions using the dielectric RheoSANS geometry.

Here, we present a procedure for the measurement of simultaneous impedance, rheology and neutron scattering from soft matter materials under shear flow.

Dielektrik RheoSANS - Empedans, Reoloji ve Kompleks Sıvılar Küçük Açı Nötron Saçılma eşzamanlı Sorgulama

A procedure for the operation of a new dielectric RheoSANS instrument capable of simultaneous interrogation of the electrical, mechanical and ...

Mühendislik

Challenges in Rheological Characterization of Highly Concentrated Suspensions &#8212; A Case Study for Screen-printing Silver Pastes

A comprehensive rheological characterization of highly concentrated suspensions or pastes is mandatory for a targeted product development meeting the manifold requirements during processing and application of such complex fluids. In this investigation, measuring protocols for a conclusive assessment of different process relevant rheological parameters have been evaluated. This includes the determination of yield stress, viscosity, wall slip velocity, structural recovery after large deformation and elongation at break as well as tensile force during filament stretching.
The importance of concomitant video recordings during parallel-plate rotational rheometry for a significant determination of rheological quantities is demonstrated. The deformation profile and flow field at the sample edge can be determined using appropriate markers. Thus, measurement parameter settings and plate roughness values can be identified for which yield stress and viscosity measurements are possible. Slip velocity can be measured directly and measuring conditions at which plug flow, shear banding or sample spillover occur can be identified clearly. 
Video recordings further confirm that the change in shear moduli observed during three stage oscillatory shear tests with small deformation amplitude in stage I and III but large oscillation amplitude in stage II can be directly attributed to structural break down and recovery. For the pastes investigated here, the degree of irreversible, shear-induced structural change increases with increasing deformation amplitude in stage II until a saturation is reached at deformations corresponding to the crossover of G' and G'', but the irreversible damage is independent of the duration of large amplitude shear. 
A capillary breakup elongational rheometer and a tensile tester have been used to characterize deformation and breakup behavior of highly filled pastes in uniaxial elongation. Significant differences were observed in all experiments described above for two commercial screen-printing silver pastes used for front side metallization of Si-solar cells.

A protocol for a robust and application relevant rheological characterization of highly concentrated suspensions is presented. Silver pastes used for screen-printing application in solar cell production are employed as model systems.

Son derece Konsantre Süspansiyonlarının reolojik Karakterizasyonunda Zorluklar - Ekran-baskı Gümüş Pastaları için bir Vaka Çalışması

A comprehensive rheological characterization of highly concentrated suspensions or pastes is mandatory for a targeted product development meeting the ...

Longitudinal Measurement of Extracellular Matrix Rigidity in 3D Tumor Models Using Particle-tracking Microrheology

The mechanical microenvironment has been shown to act as a crucial regulator of tumor growth behavior and signaling, which is itself remodeled and modified as part of a set of complex, two-way mechanosensitive interactions. While the development of biologically-relevant 3D tumor models have facilitated mechanistic studies on the impact of matrix rheology on tumor growth, the inverse problem of mapping changes in the mechanical environment induced by tumors remains challenging. Here, we describe the implementation of particle-tracking microrheology (PTM) in conjunction with 3D models of pancreatic cancer as part of a robust and viable approach for longitudinally monitoring physical changes in the tumor microenvironment, in situ. The methodology described here integrates a system of preparing in vitro 3D models embedded in a model extracellular matrix (ECM) scaffold of Type I collagen with fluorescently labeled probes uniformly distributed for position- and time-dependent microrheology measurements throughout the specimen. In vitro tumors are plated and probed in parallel conditions using multiwell imaging plates. Drawing on established methods, videos of tracer probe movements are transformed via the Generalized Stokes Einstein Relation (GSER) to report the complex frequency-dependent viscoelastic shear modulus, G*(&#969;). Because this approach is imaging-based, mechanical characterization is also mapped onto large transmitted-light spatial fields to simultaneously report qualitative changes in 3D tumor size and phenotype. Representative results showing contrasting mechanical response in sub-regions associated with localized invasion-induced matrix degradation as well as system calibration, validation data are presented. Undesirable outcomes from common experimental errors and troubleshooting of these issues are also presented. The 96-well 3D culture plating format implemented in this protocol is conducive to correlation of microrheology measurements with therapeutic screening assays or molecular imaging to gain new insights into impact of treatments or biochemical stimuli on the mechanical microenvironment.

Particle-tracking microrheology can be used to non-destructively quantify and spatially map changes in extracellular matrix mechanical properties in 3D tumor models.

Partikül izleme Microrheology kullanarak 3D Tümör Modelleri Ekstrasellüler Matriks Rijitliğinin Boyuna Ölçümü

The mechanical microenvironment has been shown to act as a crucial regulator of tumor growth behavior and signaling, which is itself remodeled and ...

Biyomühendislik

Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

The microstructure of soft matter directly impacts macroscopic rheological properties and can be changed by factors including colloidal rearrangement during previous phase changes and applied shear. To determine the extent of these changes, we have developed a microfluidic device that enables repeated phase transitions induced by exchange of the surrounding fluid and microrheological characterization while limiting shear on the sample. This technique is &#181;2rheology, the combination of microfluidics and microrheology. The microfluidic device is a two-layer design with symmetric inlet streams entering a sample chamber that traps the gel sample in place during fluid exchange. Suction can be applied far away from the sample chamber to pull fluids into the sample chamber. Material rheological properties are characterized using multiple particle tracking microrheology (MPT). In MPT, fluorescent probe particles are embedded into the material and the Brownian motion of the probes is recorded using video microscopy. The movement of the particles is tracked and the mean-squared displacement (MSD) is calculated. The MSD is related to macroscopic rheological properties, using the Generalized Stokes-Einstein Relation. The phase of the material is identified by comparison to the critical relaxation exponent, determined using time-cure superposition. Measurements of a fibrous colloidal gel illustrate the utility of the technique. This gel has a delicate structure that can be irreversibly changed when shear is applied. &#181;2rheology data shows that the material repeatedly equilibrates to the same rheological properties after each phase transition, indicating that phase transitions do not play a role in microstructural changes. To determine the role of shear, samples can be sheared prior to injection into our microfluidic device. &#181;2rheology is a widely applicable technique for the characterization of soft matter enabling the determination of rheological properties of delicate microstructures in a single sample during phase transitions in response to repeated changes in the surrounding environmental conditions.

We demonstrate the fabrication and use of a microfluidic device that enables multiple particle tracking microrheology measurements to study the rheological effects of repeated phase transitions on soft matter.

Havacilik ve Microrheology tekrarlanan faz geçişleri sırasında yumuşak madde Rheological özellikleri belirlemek için birleştirme

The microstructure of soft matter directly impacts macroscopic rheological properties and can be changed by factors including colloidal rearrangement ...

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

We investigate the sequence of physical processes exhibited during large amplitude oscillatory shearing (LAOS) of polyethylene oxide (PEO) in dimethyl sulfoxide (DMSO) and xanthan gum in water &#8212; two concentrated polymer solutions used as viscosifiers in foods, enhanced oil recovery, and soil remediation. Understanding the nonlinear rheological behavior of soft materials is important in the design and controlled manufacturing of many consumer products. It is shown how the response to LAOS of these polymer solutions can be interpreted in terms of a clear transition from linear viscoelasticity to viscoplastic deformation and back again during a period. The LAOS results are analyzed via the fully quantitative Sequence of Physical Processes (SPP) technique, using free MATLAB-based software. A detailed protocol of performing a LAOS measurement with a commercial rheometer, analyzing nonlinear stress responses with the freeware, and interpreting physical processes under LAOS is presented. It is further shown that, within the SPP framework, a LAOS response contains information regarding the linear viscoelasticity, the transient flow curves, and the critical strain responsible for the onset of nonlinearity.

We present a detailed protocol outlining how to perform nonlinear oscillatory shear rheology on soft materials, and how to run the SPP-LAOS analysis to understand the responses as a sequence of physical processes.

Büyük genlik salınım kesme yanıt yumuşak malzeme eğitim

We investigate the sequence of physical processes exhibited during large amplitude oscillatory shearing (LAOS) of polyethylene oxide (PEO) in dimethyl ...

Macro-Rheology Characterization of Gill Raker Mucus in the Silver Carp, Hypophthalmichthys molitrix

The silver carp, Hypophthalmichthys molitrix, is an invasive planktivorous filter feeder fish that infested the natural waterways of the upper Mississippi River basin due to its highly efficient filter feeding mechanism. The characteristic organs called gill rakers (GRs), found in many such filter feeders, facilitate the efficient filtration of food particles such as phytoplankton that are of a few microns in size.
The motivation to investigate the rheology of the GR mucus stems from our desire to understand its role in aiding the filter feeding process in the silver carp. The mucus-rich fluid, in a &#8216;thick and sticky&#8217; state may facilitate the adhesion of food particulates. The permeation and transport through the GR membrane are&#160;facilitated by the action of external shear forces that induce varying shear strain rates. Therefore, mucus rheology can provide a vital clue to the tremendous outcompeting nature of the silver carp within the pool of filter feeding fish. Based on this it was posited that GR mucus may provide an adhesive function to food particles and act as a transport vehicle to assist in the filter feeding process.
The main objective of the protocol is to determine the yield stress of the mucus, attributed to the minimum shear stress required to initiate flow at which irreversible plastic deformation is first observed across a structured viscoelastic material. Accordingly, rheological properties of the GR mucus, i.e., viscosity, storage, and loss moduli, were investigated for its non-Newtonian, shear-thinning nature using a rotational rheometer. &#160;
A protocol presented here is employed to analyze the rheological properties of mucus extracted from the gill rakers of a silver carp, fished at Hart Creek location of the Missouri River. The protocol aims to develop an effective strategy for rheological testing and material characterization of mucus assumed to be a structured viscoelastic material.

Macro-Rheology Characterization of Gill Raker Mucus in the Silver Carp, Hypophthalmichthys molitrix

This protocol presents a method to perform rheology characterization of mucus that resides on gill rakers (GRs) of the silver carp. Viscoelastic characteristics of GR-mucus, obtained by measuring viscosity, storage and loss moduli, are evaluated for the apparent yield stress to understand the filter feeding mechanism in GRs.

Gümüş Sazan, Hipoftalmichthys molitrix Gill Raker Mucus Makro-Reoloji Karakterizasyonu

The silver carp, Hypophthalmichthys molitrix, is an invasive planktivorous filter feeder fish that infested the natural waterways of the upper Mississippi ...

Microtensiometer for Confocal Microscopy Visualization of Dynamic Interfaces

Adsorption of surface-active molecules to fluid-fluid interfaces is ubiquitous in nature. Characterizing these interfaces requires measuring surfactant adsorption rates, evaluating equilibrium surface tensions as a function of bulk surfactant concentration, and relating how surface tension changes with changes in the interfacial area following equilibration. Simultaneous visualization of the interface using fluorescence imaging with a high-speed confocal microscope allows the direct evaluation of structure-function relationships. In the capillary pressure microtensiometer (CPM), a hemispherical air bubble is pinned at the end of the capillary in a 1 mL volume liquid reservoir. The capillary pressure across the bubble interface is controlled via a commercial microfluidic flow controller that allows for model-based pressure, bubble curvature, or bubble area control based on the Laplace equation. Compared to previous techniques such as the Langmuir trough and pendant drop, the measurement and control precision and response time are greatly enhanced; capillary pressure variations can be applied and controlled in milliseconds. The dynamic response of the bubble interface is visualized via a second optical lens as the bubble expands and contracts. The bubble contour is fit to a circular profile to determine the bubble curvature radius, R, as well as any deviations from circularity that would invalidate the results. The Laplace equation is used to determine the dynamic surface tension of the interface. Following equilibration, small pressure oscillations can be imposed by the computer-controlled microfluidic pump to oscillate the bubble radius (frequencies of 0.001-100 cycles/min) to determine the dilatational modulus The overall dimensions of the system are sufficiently small that the microtensiometer fits under the lens of a high-speed confocal microscope allowing fluorescently tagged chemical species to be quantitatively tracked with submicron lateral resolution.

This manuscript describes the design and operation of a microtensiometer/confocal microscope to do simultaneous measurements of interfacial tension and surface dilatational rheology while visualizing the interfacial morphology. This provides the real-time construction of structure-property relationships of interfaces important in technology and physiology.

Dinamik Arayüzlerin Konfokal Mikroskopi Görselleştirmesi için Mikrotensiyometre

Adsorption of surface-active molecules to fluid-fluid interfaces is ubiquitous in nature. Characterizing these interfaces requires measuring surfactant ...

Characterizing Multiscale Mechanical Properties of Brain Tissue Using Atomic Force Microscopy, Impact Indentation, and Rheometry

To design and engineer materials inspired by the properties of the brain, whether for mechanical simulants or for tissue regeneration studies, the brain tissue itself must be well characterized at various length and time scales. Like many biological tissues, brain tissue exhibits a complex, hierarchical structure. However, in contrast to most other tissues, brain is of very low mechanical stiffness, with Young&#39;s elastic moduli E on the order of 100s of Pa. This low stiffness can present challenges to experimental characterization of key mechanical properties. Here, we demonstrate several mechanical characterization techniques that have been adapted to measure the elastic and viscoelastic properties of hydrated, compliant biological materials such as brain tissue, at different length scales and loading rates. At the microscale, we conduct creep-compliance and force relaxation experiments using atomic force microscope-enabled indentation. At the mesoscale, we perform impact indentation experiments using a pendulum-based instrumented indenter. At the macroscale, we conduct parallel plate rheometry to quantify the frequency dependent shear elastic moduli. We also discuss the challenges and limitations associated with each method. Together these techniques enable an in-depth mechanical characterization of brain tissue that can be used to better understand the structure of brain and to engineer bio-inspired materials.

We present a set of techniques to characterize the viscoelastic mechanical properties of brain at the micro-, meso-, and macro-scales.

Atomik Kuvvet Mikroskobu, Darbe girinti ve reometre kullanarak Beyin Doku Ölçekli Mekanik Özellikleri karakterize

To design and engineer materials inspired by the properties of the brain, whether for mechanical simulants or for tissue regeneration studies, the brain ...

Nörobilim

Rapid Viscoelastic Characterization of Airway Mucus Using a Benchtop Rheometer

In muco-obstructive lung diseases (e.g., asthma, chronic obstructive pulmonary disease, cystic fibrosis) and other respiratory conditions (e.g., viral/bacterial infections), mucus biophysical properties are altered by goblet cell hypersecretion, airway dehydration, oxidative stress, and the presence of extracellular DNA. Previous studies showed that sputum viscoelasticity correlated with pulmonary function and that treatments affecting sputum rheology (e.g., mucolytics) can result in remarkable clinical benefits. In general, rheological measurements of non-Newtonian fluids employ elaborate, time-consuming approaches (e.g., parallel/cone-plate rheometers and/or microbead particle tracking) that require extensive training to perform the assay and interpret the data. This study tested the reliability, reproducibility, and sensitivity of Rheomuco, a user-friendly benchtop device that is designed to perform rapid measurements using dynamic oscillation with a shear-strain sweep to provide linear viscoelastic moduli (G&#39;, G&#34;, G*, and tan &#948;) and gel point characteristics (&#947;c&#160;and &#963;c) for clinical samples within 5 min. Device performance was validated using different concentrations of a mucus simulant, 8 MDa polyethylene oxide (PEO), and against traditional bulk rheology measurements. A clinical isolate harvested from an intubated patient with status asthmaticus (SA) was then assessed in triplicate measurements and the coefficient of variation between measurements is &#60;10%. Ex vivo use of a potent mucus reducing agent, TCEP, on SA mucus resulted in a five-fold decrease in elastic modulus and a change toward a more &#34;liquid-like&#34; behavior overall (e.g., higher tan &#948;). Together, these results demonstrate that the tested benchtop rheometer can make reliable measures of mucus viscoelasticity in clinical and research settings. In summary, the described protocol could be used to explore the effects of mucoactive drugs (e.g., rhDNase, N-acetyl cysteine) onsite to adapt treatment on a case-by-case basis, or in preclinical studies of novel compounds.

The viscoelastic properties of mucus play a critical role in mucociliary clearance. However, traditional mucus rheological techniques require complex and time-consuming approaches. This study provides a detailed protocol for the use of a benchtop rheometer that can rapidly and reliably perform viscoelastic measurements.

Ortogonal Süperpozisyon Reolojisi için Kalibrasyon Prosedürleri

Özet

Daha Fazla Video Keşfet

Bu videodaki bölümler

Ham Petrol Reolojisinin CO İle Dengesinde Ölçümü