This work was supported by the Department of Energy Bioenergy Technologies Office under Contract no. DE-AC36-08-GO28308. The U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U.S. Government purposes.

<ol>
	<li>Cvetanovi&#263;, R. J., Amenomiya, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Application+of+a+Temperature-Programmed+Desorption+Technique+to+Catalyst+Studies.">Application of a Temperature-Programmed Desorption Technique to Catalyst Studies.</a> Adv. Catal. 17, 103-149 (1967).</li><li>Falconer, J. L., Schwarz, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Temperature-Programmed+Desorption+and+Reaction:+Applications+to+Supported+Catalysts.">Temperature-Programmed Desorption and Reaction: Applications to Supported Catalysts.</a> Catal. Rev. - Sci. Eng. 25 (2), 141-227 (1983).</li><li>Hurst, N. W., Gentry, S. J., Jones, A., McNicol, B. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Temperature+Programmed+Reduction.">Temperature Programmed Reduction.</a> Catal. Rev. - Sci. Eng. 24 (2), 233-309 (1982).</li><li>Sanchez, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=When+Gold+Is+Not+Noble:+Nanoscale+Gold+Catalysts.">When Gold Is Not Noble: Nanoscale Gold Catalysts.</a> J. Phys. Chem. A. 103 (48), 9573-9578 (1999).</li><li>Alayoglu, S., Nilekar, A. U., Mavrikakis, M., Eichhorn, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ru-Pt+core-shell+nanoparticles+for+preferential+oxidation+of+carbon+monoxide+in+hydrogen.">Ru-Pt core-shell nanoparticles for preferential oxidation of carbon monoxide in hydrogen.</a> Nat Mater. 7 (4), 333-338 (2008).</li><li>Wachs, I. E., Madix, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+oxidation+of+methanol+on+a+silver+(110)+catalyst.">The oxidation of methanol on a silver (110) catalyst.</a> Surf. Sci. 76 (2), 531-558 (1978).</li><li>Topsoe, N. Y., Topsoe, H., Dumesic, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vanadia/Titania+Catalysts+for+Selective+Catalytic+Reduction+(SCR)+of+Nitric-Oxide+by+Ammonia.">Vanadia/Titania Catalysts for Selective Catalytic Reduction (SCR) of Nitric-Oxide by Ammonia.</a> J Catal. 151 (1), 226-240 (1995).</li><li>Clarke, D. B., Bell, A. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+Infrared+Study+of+Methanol+Synthesis+from+CO2+on+Clean+and+Potassium-Promoted+Cu/SiO2.">An Infrared Study of Methanol Synthesis from CO2 on Clean and Potassium-Promoted Cu/SiO2.</a> J Catal. 154 (2), 314-328 (1995).</li><li>Schaidle, J. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+and+Computational+Investigation+of+Acetic+Acid+Deoxygenation+over+Oxophilic+Molybdenum+Carbide:+Surface+Chemistry+and+Active+Site+Identity.">Experimental and Computational Investigation of Acetic Acid Deoxygenation over Oxophilic Molybdenum Carbide: Surface Chemistry and Active Site Identity.</a> ACS Catal. 6 (2), 1181-1197 (2016).</li><li>Ruddy, D. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+heterogeneous+catalysts+for+bio-oil+upgrading+via+"ex+situ+catalytic+fast+pyrolysis":+catalyst+development+through+the+study+of+model+compounds.">Recent advances in heterogeneous catalysts for bio-oil upgrading via "ex situ catalytic fast pyrolysis": catalyst development through the study of model compounds.</a> Green Chem. 16 (2), 454-490 (2014).</li><li>Dutta, A., Schaidle, J. A., Humbird, D., Baddour, F. G., Sahir, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conceptual+Process+Design+and+Techno-Economic+Assessment+of+Ex+Situ+Catalytic+Fast+Pyrolysis+of+Biomass:+A+Fixed+Bed+Reactor+Implementation+Scenario+for+Future+Feasibility.">Conceptual Process Design and Techno-Economic Assessment of Ex Situ Catalytic Fast Pyrolysis of Biomass: A Fixed Bed Reactor Implementation Scenario for Future Feasibility.</a> Top. Catal. 59 (1), 2-18 (2016).</li><li>Venkatakrishnan, V. K., Delgass, W. N., Ribeiro, F. H., Agrawal, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oxygen+removal+from+intact+biomass+to+produce+liquid+fuel+range+hydrocarbons+via+fast-hydropyrolysis+and+vapor-phase+catalytic+hydrodeoxygenation.">Oxygen removal from intact biomass to produce liquid fuel range hydrocarbons via fast-hydropyrolysis and vapor-phase catalytic hydrodeoxygenation.</a> Green Chem. 17 (1), 178-183 (2015).</li><li>Bej, S. K., Thompson, L. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Acetone+condensation+over+molybdenum+nitride+and+carbide+catalysts.">Acetone condensation over molybdenum nitride and carbide catalysts.</a> Appl. Catal., A. 264 (2), 141-150 (2004).</li><li>Sullivan, M. M., Held, J. T., Bhan, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+and+site+evolution+of+molybdenum+carbide+catalysts+upon+exposure+to+oxygen.">Structure and site evolution of molybdenum carbide catalysts upon exposure to oxygen.</a> J Catal. 326, 82-91 (2015).</li><li>Lee, W. S., Kumar, A., Wang, Z. S., Bhan, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemical+Titration+and+Transient+Kinetic+Studies+of+Site+Requirements+in+Mo2C-Catalyzed+Vapor+Phase+Anisole+Hydrodeoxygenation.">Chemical Titration and Transient Kinetic Studies of Site Requirements in Mo2C-Catalyzed Vapor Phase Anisole Hydrodeoxygenation.</a> ACS Catal. 5 (7), 4104-4114 (2015).</li><li>Ren, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Selective+Hydrodeoxygenation+of+Biomass-Derived+Oxygenates+to+Unsaturated+Hydrocarbons+using+Molybdenum+Carbide+Catalysts.">Selective Hydrodeoxygenation of Biomass-Derived Oxygenates to Unsaturated Hydrocarbons using Molybdenum Carbide Catalysts.</a> Chemsuschem. 6 (5), 798-801 (2013).</li><li>Grob, R. L., Kaiser, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Modern Practice of Gas Chromatography. , 403-460 (2004).</li><li>Guiochon Georges, L., Guillemin Claude, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Journal of Chromatography Library. 42, 563-586 (1988).</li><li>Guiochon Georges, L., Guillemin Claude, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Journal of Chromatography Library. 42, 587-627 (1988).</li><li>Guiochon Georges, L., Guillemin Claude, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Journal of Chromatography Library. 42, 629-659 (1988).</li><li>Guiochon Georges, L., Guillemin Claude, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Journal of Chromatography Library. 42, 661-687 (1988).</li><li>Baddour, F. G., Nash, C. P., Schaidle, J. A., Ruddy, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+&#945;-MoC1-x+Nanoparticles+with+a+Surface-Modified+SBA-15+Hard+Template:+Determination+of+Structure-Function+Relationships+in+Acetic+Acid+Deoxygenation.">Synthesis of &#945;-MoC1-x Nanoparticles with a Surface-Modified SBA-15 Hard Template: Determination of Structure-Function Relationships in Acetic Acid Deoxygenation.</a> Angew. Chem., Int. Ed. n/a-n/a. , (2016).</li><li>Habas, S. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Facile+Molecular+Precursor+Route+to+Metal+Phosphide+Nanoparticles+and+Their+Evaluation+as+Hydrodeoxygenation+Catalysts.">A Facile Molecular Precursor Route to Metal Phosphide Nanoparticles and Their Evaluation as Hydrodeoxygenation Catalysts.</a> Chem. Mater. 27 (22), 7580-7592 (2015).</li><li>Zhang, Q., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deconvolution+and+quantification+of+hydrocarbon-like+and+oxygenated+organic+aerosols+based+on+aerosol+mass+spectrometry.">Deconvolution and quantification of hydrocarbon-like and oxygenated organic aerosols based on aerosol mass spectrometry.</a> Environ Sci Technol. 39 (13), 4938-4952 (2005).</li><li>Ko, E. I., Benziger, J. B., Madix, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reactions+of+Methanol+on+W(100)+and+W(100)-(5+X+1)C+Surfaces.">Reactions of Methanol on W(100) and W(100)-(5 X 1)C Surfaces.</a> J Catal. 62 (2), 264-274 (1980).</li><li>Pestman, R., Koster, R. M., Pieterse, J. A. Z., Ponec, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reactions+of+carboxylic+acids+on+oxides:+1.+Selective+hydrogenation+of+acetic+acid+to+acetaldehyde.">Reactions of carboxylic acids on oxides: 1. Selective hydrogenation of acetic acid to acetaldehyde.</a> J Catal. 168 (2), 255-264 (1997).</li><li>Pestman, R., Koster, R. M., Van Duijne, A., Pieterse, J. A. Z., Ponec, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reactions+of+carboxylic+acids+on+oxides:+2.+Bimolecular+reaction+of+aliphatic+acids+to+ketones.">Reactions of carboxylic acids on oxides: 2. Bimolecular reaction of aliphatic acids to ketones.</a> J Catal. 168 (2), 265-272 (1997).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=NIST+Standard+Reference+Database+Number+69.">NIST Standard Reference Database Number 69.</a> NIST Chemistry WebBook. , (2016).</li><li>Ausloos, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+critical+evaluation+of+a+comprehensive+mass+spectral+library.">The critical evaluation of a comprehensive mass spectral library.</a> J. Am. Soc. Mass Spectrom. 10 (4), 287-299 (1999).</li><li>Barwick, V., Langley, J., Mallet, T., Stein, B., Webb, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Best Practice Guide for Generating Mass Spectra. , (2006).</li><li>Lecchi, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Method+for+Monitoring+and+Controlling+Reproducibility+of+Intensity+Data+in+Complex+Electrospray+Mass+Spectra:+A+Thermometer+Ion-based+Strategy.">A Method for Monitoring and Controlling Reproducibility of Intensity Data in Complex Electrospray Mass Spectra: A Thermometer Ion-based Strategy.</a> J. Am. Soc. Mass Spectrom. 20 (3), 398-410 (2009).</li></ol>

The authors have nothing to disclose.

TPRxn yöntemi, reaksiyon sıcaklığının bir fonksiyonu olarak bir katalizör etkinliği ve seçiciliği hakkında bilgi veren, katalitik malzemeler taranması için güçlü bir araçtır. Böyle TPD, TPO ve TPR gibi diğer ısı programlanmış yöntemler adsorpsiyon tepkenlerin gücü, adsorpsiyon sitelerinin sayısı ve uygun bir katalizör ön tedavi yöntemleri hakkında bilgi verebilir, ancak doğrudan katalitik performans verileri vermemektedir. Çalışmanın ayrıntıları TPRxn yöntemi kararlı durum reak...

Sıcaklık programlanan reaksiyonu (TPRxn) sürekli bir artış ile oksidasyon (TPO) ve indirgeme (TPR) ve ilerledikçe bir reaktan eşzamanlı bir katalizörün maruz ile veya ardından (TPD) desorpsiyon dahil olmak üzere birçok sıcaklık programlı yöntemler biridir sıcaklık. 1, 2, 3 TPRxn reaksiyon sıcaklığının bir fonksiyonu olarak, katalizör etkinliği ve seçiciliği hakkında bilgi sağlayan geçici bir tekniktir. 4, 5, 6 Ayrıca popüler bir tekniktir: edebiyat verimleri kullanımını gerekçe 1000&#39;in üzerinde kaynaklar içinde anahtar kelimelerin sıcaklık programlanmış reaksiyonun &#39;bir arama. TPRxn deneyler genellikle gerçek zamanlı reaktör çıkış akımı analizi ve p korelasyon için bir kütle spektrometresi (MS) ile donatılmış, bir mikroreaktör sisteminde yapılmaktadırsıcaklık performansı alabilirsiniz. Reaktif gazlar, bir şırınga pompası yoluyla ya da bir sıvı ile atıl gaz kabarcıkları geçirmek suretiyle buhar olarak sokulabilir kütle akış kontrol ve sıvılar kullanılarak dahil edilebilir. Katalizör, genellikle reaksiyon için arzu edilen katalitik faz oluşturmak için in situ ön işlemden geçirilir. Bazı sistemler katalizörün, ya da reaksiyon mekanizması üzerinde mevcut olan nicel ve nitel bir katalizör seçiciliği hakkında bilgi, yüzey türleri temin etmek için, tipik bir kütle spektrometresi ötesinde ilave analiz cihazları yer alır. Örneğin, in situ Fourier programlanmış sıcaklık Infrared Spektroskopisi (FTIR), reaksiyon sıcaklığı değişen yüzey türlerin evrimi hakkında bilgi sağlar Transform. Bu çalışmada gösterilmiştir 7, 8 kişi bu TPRxn sistemi daha tipik MS ek bir gaz kromatogram (GC) ile donatılmıştır. dört paralel sütun ile donatılmış bu GC, daha doğru hacmindeki sağlarReaksiyon ürünleri on Klor, ancak sütun üzerinden akıtmak için ürünler gereken zaman ile analiz frekans sınırlıdır. Bu durumda, MS ve GC kombinasyonu reaktanların ve ürünlerin doğru miktar gerçek zamanlı belirlenmesini bağlanması için özellikle yararlı olabilir. Burada, molibden karbür katalizörler üzerinde asetik asit deoksijenasyon incelemek için TPRxn metodolojisini uygulamak. asetik asit kütle piroliz buharları bulunan birçok karboksilik asitler için yararlı bir analog olduğu için bu, katalizör araştırma ilginç ve önemli bir reaksiyondur. 9 kütle piroliz buharının yüksek oksijen içeriği furfural, 1-propanol gibi birçok biyo-kütle piroliz buharı model bileşikler için, deoksijenasyon performansı umut verici göstermiştir hidrokarbon yakıt, 10, 11, 12 ve molibden karbür katalizörleri üretmek için oksijen çıkarma gerektirir,fenolikler ve asetik asit elde edildi. 9, 13, 14, 15, 16 Bununla birlikte, deoksijenasyon reaksiyonlarda molibden karbür katalizörlerin etkinliği ve seçiciliği katalizör yapısı ve bileşimi, tepkimeye türler ve reaksiyon koşullarına bağlıdır. Asetik asit TPRxn toplanan veriler molibden karbür katalizörler yaklaşık yukarıdaki deoksijenasyon reaksiyonlar için aktif olduğunu göstermektedir Katalizör karakterizasyonu bilgileri ile bir araya getirildiğinde, 300 ° C ve asetik asit devinimlerinin hesaplanması yoluyla sıcaklığın bir fonksiyonu olarak katalizör etkinliğinin ölçümü sağlar. TPRxn sonuçları deoksijenasyon (yani, CO bağı kıran) ürünleri yaklaşık altındaki sıcaklıklarda tercih olduğunu gösteriyor 400 ° C ve dekarbonilasyon (yani, CC bağ-kırma) ürünleri favo vardıryaklaşık üzerindeki sıcaklıklarda kırmızı 400 ° C. Buna ek olarak, TPRxn çalışmalar çeşitli sentetik yöntemler kullanılarak üretilen molibden karbür katalizörlerin aktivitesine değişiklikleri ve seçiciliği göstermektedir (yani, farklı bir molibden karbür katalizör yapıları ve bileşimlerin üretimi). Yine de, bu bilginin değeri ve daha genel olarak, katalizör tasarımı ve proses optimizasyonu doğru TPRxn deneysel verilerin başarılı uygulama elde edilen verilerin kalitesinin bir fonksiyonudur. TPRxn işlem boyunca vurgulanan potansiyel zorluklar ve sınırlamalar dikkatle göz ve bilgi çok önemlidir.

<table><tbody><tr><td>glacial acetic acid</td><td>Cole-Parmer</td><td>EW-88401-62</td><td>alternate supplier acceptable if ACS purity grade. See caution statement in protocol for safety information</td></tr><tr><td>UHP He</td><td>Airgas</td><td>HE R300SS</td><td>alternate supplier acceptable if&amp;nbsp;&gt;99.99% purity</td></tr><tr><td>UHP Ar</td><td>Arigas</td><td>AR R200</td><td>alternate supplier acceptable if&amp;nbsp;&gt;99.99% purity</td></tr><tr><td>acetone</td><td>VWR International</td><td>BDH1101-4LP</td><td>alternate supplier acceptable if&amp;nbsp;&gt;99.5% purity</td></tr><tr><td>quartz chips</td><td>Powder Technology Inc.</td><td>Crushed Quartz</td><td>sieved 180-300 &amp;micro;m, calcined in air at 500 &amp;deg;C overnight</td></tr><tr><td>mass spectrometer - turbo vacuum pump</td><td>Pfeiffer Vacuum</td><td>TSU 071</td><td>mass spectrometer is controlled with LabVIEW 2010 software package (National Instruments)</td></tr><tr><td>mass spectrometer - turbo vacuum pump</td><td>Stanford Research Systems</td><td>RGA100</td><td></td></tr><tr><td>micro gas chromatograph</td><td>Agilent</td><td>CP740388</td><td>490 Micro GC; 4-channel system&lt;br/&gt; Channel 1: 494001360 Molseive 10m, heated backflush&lt;br/&gt; Channel 2: 494001460 PPU 10m, heated backflush&lt;br/&gt; Channel 3: 490040 AL2O3/KCL 10+0.2m, heated backflush SPECIAL&lt;br/&gt; Channel 4: 492005750 5CB 15m, heated</td></tr><tr><td>GC software</td><td>Aglient</td><td>OpenLAB CDS EZChrom Edition</td><td></td></tr><tr><td>clean gas filters</td><td>Agilent</td><td>CP17974</td><td>for use on GC carrier gases (He, Ar)</td></tr><tr><td>quartz &quot;U-tube&quot; reactor</td><td>n/a</td><td></td><td>hand blown glass, custom built to order</td></tr><tr><td>bubbler</td><td>n/a</td><td></td><td>custom built to order</td></tr><tr><td>ceramic furnace</td><td>Watlow</td><td>discontinued</td><td>Similar furnace part #: VC401J12A-B000R</td></tr><tr><td>heat tape controller</td><td>n/a</td><td></td><td>custom built with Watlow EZ-zone parts</td></tr><tr><td>heat tape</td><td>Omega</td><td>FGH051-060</td><td>alternate supplier for extreme temperature heat tape acceptable</td></tr><tr><td>heat tape insulation</td><td>JEGS</td><td>710-80809</td><td>alternate supplier acceptable</td></tr><tr><td>thermocouple</td><td>Omega</td><td>&lt;em&gt;e.g.&lt;/em&gt;, KMQSS-062U-18</td><td>K-type thermocouples; alternate sizes may be required</td></tr><tr><td>thermocouple O-ring</td><td>Swagelok</td><td>VT-7-OR-001-1/2</td><td>perfluoroelastomer(fluorocarbon FKM) O-ring</td></tr><tr><td>2 &amp;micro;m solids filter, VCR gasket</td><td>Swagelok</td><td>SS-4-VCR-2-2M</td><td></td></tr><tr><td>1 &amp;micro;m orifice, VCR gasket</td><td>Lenox Laser</td><td>SS-4-VCR-2</td><td>for mass spectrometer orifice</td></tr><tr><td>316/316L stainless steel tubing and fittings</td><td>Swagelok</td><td>Varies</td><td>See Swagelok &#039;VCR Metal Gasket Face Seal Fittings&#039; and &#039;Stainless Steel Seamless Tubing and Tube Support Systems&#039; catalogs for more information</td></tr><tr><td>316/316L stainless steel tubing and fittings</td><td>Swagelok</td><td>Varies</td><td>See Swagelok &#039;Integral-Bonnet Needle Valves&#039;, &#039;Bellows-Sealed Valves&#039; and &#039;One-Piece Instrumentation Ball Valves&#039; catalogs for more information</td></tr></tbody></table>

temperature-programmed deoxygenation of acetic acid on molybdenum carbide catalysts

Sıcaklık programlanmış reaksiyonu (TPRxn) koşullar çeşitli katı katalizör performansı taranması için basit ama güçlü bir araçtır. Bir TPRxn sistemi gerçek zamanlı (örneğin, kütle spektrometresi) &#39;de tepkisini izlemek için reaksiyon ürünlerini (örneğin, gaz kromatografisi), ve enstrümantasyon ölçmek için, enstrümantasyon akış kontrolü, bir reaktör, fırın, gaz ve buhar kaynağı içermektedir. Burada, asetik asit, biyokütle piroliz buharlarının iyileştirilmesi / istikrar birçok arasında önemli bir reaksiyonun Oksijensizlendirme için molibden karbür katalizörler incelemek için TPRxn metodolojisini uygulamak. TPRxn katalizörü etkinliği ve seçiciliğinin değerlendirmek ve varsayımsal Reaksiyon yolları (örneğin, dekarbonilasyon, ketonization ve hidrojenasyon) test etmek için kullanılır. Asetik asit deoksijenlemesi arasında TPRxn çalışmanın sonuçları molibden karbür yaklaşık üstündeki sıcaklıklarda, bu reaksiyon için aktif bir katalizör olduğunu göstermektedir 300 ° C ve reaksiyon iyilik olduğunuyaklaşık altındaki sıcaklıklarda deoksijenasyon (yani, CO bağı kıran) ürünleri Yaklaşık üstündeki sıcaklıklarda 400 ° C ve dekarbonilasyon (yani, CC bağ-kırma) ürünleri 400 ° C.

Online MS gerçek zamanlı olarak, reaktör çıkışındaki gaz bileşiminin analiz yeteneği sağlar. Online MS analizi öncesinde ürünleri ve kütle parçalanması desen üst üste gelen bileşikler arasında ayrım Böylece türlerin belirlenmesi zordur ayırmak için herhangi bir cihaz ile birlikte değildir. Tablo 2&#39;de de gösterildiği gibi, asetik asit TPRxn deneylerden sık rastlanan ürünler arasında çok sayıda çok sayıda ortak m / z sinyalleri ile ...

Watch this Scientific Journal Video about Temperature-programmed Deoxygenation of Acetic Acid on Molybdenum Carbide Catalysts at JoVE.com

Temperature-programmed Deoxygenation of Acetic Acid on Molybdenum Carbide Catalysts

asetik asit deoksijenlemesi sırasında molibden karbür katalitik performansını değerlendirmek için bir mikro ölçekli sıcaklık programlı bir reaktörün çalışması için bir protokol burada sunulmuştur.

Molibden Karbür Katalizörler üzerinde Asetik Asit Sıcaklık programlanmış deoksijenasyonu

Temperature programmed reaction (TPRxn) is a simple yet powerful tool for screening solid catalyst performance at a variety of conditions. A TPRxn system ...

temperature-programmed-deoxygenation-acetic-acid-on-molybdenum

Universidad de Cartagena UDEC

Research

Education

JoVE Journal

JoVE Core

Organic Chemistry

Chemistry

Unit 1

Thermodynamics and Chemical Kinetics

SCIENTISTS IN ACTION

11.4K Görüntüleme.  National Renewable Energy Laboratory.  asetik asit deoksijenlemesi sırasında molibden karbür katalitik performansını değerlendirmek için bir mikro ölçekli sıcaklık programlı bir reaktörün çalışması için bir protokol burada sunulmuştur. 

Video: Temperature-programmed Deoxygenation of Acetic Acid on Molybdenum Carbide Catalysts

Aerosol-assisted Chemical Vapor Deposition of Metal Oxide Structures: Zinc Oxide Rods

Whilst columnar zinc oxide (ZnO) structures in the form of rods or wires have been synthesized previously by different liquid- or vapor-phase routes, their high cost production and/or incompatibility with microfabrication technologies, due to the use of pre-deposited catalyst-seeds and/or high processing temperatures exceeding 900 &#176;C, represent a drawback for a widespread use of these methods. Here, however, we report the synthesis of ZnO rods via a non-catalyzed vapor-solid mechanism enabled by using an aerosol-assisted chemical vapor deposition (CVD) method at 400 &#176;C with zinc chloride (ZnCl2) as the precursor and ethanol as the carrier solvent. This method provides both single-step formation of ZnO rods and the possibility of their direct integration with various substrate types, including silicon, silicon-based micromachined platforms, quartz, or high heat resistant polymers. This potentially facilitates the use of this method at a large-scale, due to its compatibility with state-of-the-art microfabrication processes for device manufacture. This report also describes the properties of these structures (e.g., morphology, crystalline phase, optical band gap, chemical composition, electrical resistance) and validates its gas sensing functionality towards carbon monoxide.

Columnar zinc oxide structures in the form of rods are synthesized via aerosol-assisted chemical vapor deposition without the use of pre-deposited catalyst-seed particles. This method is scalable and compatible with various substrates based on either silicon, quartz or polymers.

Aerosol destekli kimyasal Buhar biriktirme Metal Oksit yapıları: çinko oksit çubuklar

Whilst columnar zinc oxide (ZnO) structures in the form of rods or wires have been synthesized previously by different liquid- or vapor-phase routes, ...

Kimya

Simultaneous Multi-surface Anodizations and Stair-like Reverse Biases Detachment of Anodic Aluminum Oxides in Sulfuric and Oxalic Acid Electrolyte

After reporting on the two-step anodization, nanoporous anodic aluminum oxides (AAOs) have been widely utilized in the versatile fields of fundamental sciences and industrial applications owing to their periodic arrangement of nanopores with relatively high aspect ratio. However, the techniques reported so far, which could be only valid for mono-surface anodization, show critical disadvantages, i.e., time-consuming as well as complicated procedures, requiring toxic chemicals, and wasting valuable natural resources. In this paper, we demonstrate a facile, efficient, and environmentally clean method to fabricate nanoporous AAOs in sulfuric and oxalic acid electrolytes, which can overcome the limitations that result from conventional AAO fabricating methods. First, plural AAOs are produced at one time through simultaneous multi-surfaces anodization (SMSA), indicating mass-producibility of the AAOs with comparable qualities. Second, those AAOs can be separated from the aluminum (Al) substrate by applying stair-like reverse biases (SRBs) in the same electrolyte used for the SMSAs, implying simplicity and green technological characteristics. Finally, a unit sequence consisting of the SMSAs sequentially combined with SRBs-based detachment can be applied repeatedly to the same Al substrate, which reinforces the advantages of this strategy and also guarantees the efficient usage of natural resources.

A protocol for fabricating nanoporous anodic aluminum oxides via simultaneous multi-surfaces anodization followed by stair-like reverse biases detachments is presented. It can be applied repeatedly to the same aluminum substrate, exhibiting a facile, high-yield, and environmentally clean strategy.

Eşzamanlı çoklu yüzey Anodizations ve merdiven gibi ters önyargıları dekolmanı anodik alüminyum oksit içinde sülfürik ve oksalik asit elektrolit

After reporting on the two-step anodization, nanoporous anodic aluminum oxides (AAOs) have been widely utilized in the versatile fields of fundamental ...

Mühendislik

Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction

This protocol presents both the synthesis method of the Ni single atom catalyst, and the electrochemical testing of its catalytic activity and selectivity in aqueous CO2 reduction. Different from traditional metal nanocrystals, the synthesis of metal single atoms involves a matrix material that can confine those single atoms and prevent them from aggregation. We report an electrospinning and thermal annealing method to prepare Ni single atoms dispersed and coordinated in a graphene shell, as active centers for CO2 reduction to CO. During the synthesis, N dopants play a critical role in generating graphene vacancies to trap Ni atoms. Aberration-corrected scanning transmission electron microscopy and three-dimensional atom probe tomography were employed to identify the single Ni atomic sites in graphene vacancies. Detailed setup of electrochemical CO2 reduction apparatus coupled with an on-line gas chromatography is also demonstrated. Compared to metallic Ni, Ni single atom catalyst exhibit dramatically improved CO2 reduction and suppressed H2 evolution side reaction.

Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction

Here, we present a protocol for the synthesis and electrochemical testing of transition metal single atoms coordinated in graphene vacancies as active centers for selective carbon dioxide reduction to carbon monoxide in aqueous solutions.

Sentez ve elektrokimyasal CO2 azaltılması için geçiş metalleri tek Atom katalizör performans karakterizasyonu

This protocol presents both the synthesis method of the Ni single atom catalyst, and the electrochemical testing of its catalytic activity and selectivity ...

Atomic Layer Deposition of Vanadium Dioxide and a Temperature-dependent Optical Model

Vanadium dioxide is a material that has a reversible metal-insulator phase change near 68 &#176;C. To grow VO2 on a wide variety of substrates, with wafer-scale uniformity and angstrom level control of thickness, the method of atomic-layer deposition was chosen. This ALD process enables high-quality, low-temperature (&#8804;150 &#176;C) growth of ultrathin films (100-1000 &#197;) of VO2. For this demonstration, the VO2 films were grown on sapphire substrates. This low temperature growth technique produces mostly amorphous VO2 films. A subsequent anneal in an ultra-high vacuum chamber with a pressure of 7x10-4 Pa of ultra-high purity (99.999%) oxygen produced oriented, polycrystalline VO2 films. The crystallinity, phase, and strain of the VO2 were determined by Raman spectroscopy and X-ray diffraction, while the stoichiometry and impurity levels were determined by X-ray photoelectron spectroscopy, and finally the morphology was determined by atomic force microscopy. These data demonstrate the high-quality of the films grown by this technique. A model was created to fit to the data for VO2 in its metallic and insulating phases in the near infrared spectral region. The permittivity and refractive index of the ALD VO2 agreed well with the other fabrication methods in its insulating phase, but showed a difference in its metallic state. Finally, the analysis of the films&#39; optical properties enabled the creation of a wavelength- and temperature-dependent model of the complex optical refractive index for developing VO2 as a tunable refractive index material.

Thin films (100-1000 &#197;) of vanadium dioxide (VO2) were created by atomic-layer deposition (ALD) on sapphire substrates. Following this, the optical properties were characterized through the metal-insulator transition of VO2. From the measured optical properties, a model was created to describe the tunable refractive index of VO2.

Atom katman birikimi Vanadyum dioksit ve sıcaklık-bağımlı optik manken

Vanadium dioxide is a material that has a reversible metal-insulator phase change near 68 &#176;C. To grow VO2 on a wide variety of substrates, with ...

Solvothermal Synthesis of MIL-96 and UiO-66-NH2 on Atomic Layer Deposited Metal Oxide Coatings on Fiber Mats

Metal-organic frameworks (MOFs), which contain reactive metal clusters and organic ligands allowing for large porosities and surface areas, have proven effective in gas adsorption, separations, and catalysis. MOFs are most commonly synthesized as bulk powder, requiring additional processes to adhere them to functional devices and fabrics that risk decreasing the powder porosity and adsorption capacity. Here, we demonstrate a method of first coating fabrics with metal oxide films using atomic layer deposition (ALD). This process creates conformal films of controllable thickness on each fiber, while providing a more reactive surface for MOF nucleation. By submerging the ALD coated fabric in solution during solvothermal MOF synthesis, the MOFs create a conformal, well-adhered coating on the fibers, resulting in a MOF-functionalized fabric, without additional adhesion materials that may block MOF pores and functional sites. Here we demonstrate two solvothermal synthesis methods. First, we form a MIL-96(Al) layer on polypropylene fibers using synthetic conditions that convert the metal oxide to MOF. Using initial inorganic films of varying thicknesses, diffusion of the organic linker into the inorganic allows us to control the extent of MOF loading on the fabric. Second, we perform a solvothermal synthesis of UiO-66-NH2 in which the MOF nucleates on the conformal metal oxide coating on polyamide-6 (PA-6) fibers, thereby producing a uniform and conformal thin film of MOF on the fabric. The resulting materials can be directly incorporated into filter devices or protective clothing and eliminate the maladroit qualities of loose powder.

Solvothermal Synthesis of MIL-96 and UiO-66-NH2 on Atomic Layer Deposited Metal Oxide Coatings on Fiber Mats

Metal-organic frameworks are effective in gas storage and heterogeneous catalysis, but typical synthesis methods result in loose powders that are difficult to incorporate into smart materials. We demonstrate a method of first coating fabrics with ALD metal oxides, resulting in conformal films of MOF on the fabrics during solvothermal synthesis.

Solvothermal sentez MIL-96 ve UIO-66-NH2 atom katman üzerinde Metal oksit kaplama Fiber paspaslar üzerine yatırılır.

Metal-organic frameworks (MOFs), which contain reactive metal clusters and organic ligands allowing for large porosities and surface areas, have proven ...

Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source

Herein is presented a general strategy to perform reactions under mild to moderate CO2 pressures with dry ice. This technique obviates the need for specialized equipment to achieve modest pressures, and can even be used to achieve higher pressures in more specialized equipment and sturdier reaction vessels. At the end of the reaction, the vials can be easily depressurized by opening at room temperature. In the present example CO2 serves as both a putative directing group as well as a way to passivate amine substrates, thereby preventing oxidation during the organometallic reaction. In addition to being easily added, the directing group is also removed under vacuum, obviating the need for extensive purification to remove the directing group. This strategy allows the facile &#947;-C(sp3)-H arylation of aliphatic amines and has the potential to be applied to a variety of other amine-based reactions.

Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source

Here we present a protocol for performing reactions in simple reaction vessels under low-to-moderate pressures of CO2. The reactions can be performed in a variety of vessels simply by administering the carbon dioxide in the form of dry ice, without the need for costly or elaborate equipment or set-ups.

Kuru buz katı CO2 kaynak olarak kullandığını mühürlü damarlarının Orta basınç elde

Herein is presented a general strategy to perform reactions under mild to moderate CO2 pressures with dry ice. This technique obviates the need for ...

CO2 Photoreduction to CH4 Performance Under Concentrating Solar Light

We demonstrate a method for the enhancement of CO2 photoreduction. As the driving force of a photocatalytic reaction is from solar light, the basic idea is to use concentration technology to raise the incident solar light intensity. Concentrating a large-area light onto a small area cannot only increase light intensity, but also reduce the catalyst amount, as well as the reactor volume, and increase the surface temperature. The concentration of light can be realized by different devices. In this manuscript, it is realized by a Fresnel lens. The light penetrates the lens and is concentrated on a disc-shaped catalyst. The results show that both the reaction rate and the total yield are efficiently increased. The method can be applied to most CO2 photoreduction catalysts, as well as to similar reactions with a low reaction rate at natural light.

CO2 Photoreduction to CH4 Performance Under Concentrating Solar Light

We present a protocol for improving the performance of CO2 photoreduction to CH4 by heightening the incident light intensity via concentrating solar energy technology.

CO2 fotoreğitimlik ch4 performans altında konsantre güneş ışığı

We demonstrate a method for the enhancement of CO2 photoreduction. As the driving force of a photocatalytic reaction is from solar light, the basic idea ...

Multiscale Sampling of a Heterogeneous Water/Metal Catalyst Interface using Density Functional Theory and Force-Field Molecular Dynamics

A significant number of heterogeneously-catalyzed chemical processes occur under liquid conditions, but simulating catalyst function under such conditions is challenging when it is necessary to include the solvent molecules. The bond breaking and forming processes modeled in these systems necessitate the use of quantum chemical methods. Since molecules in the liquid phase are under constant thermal motion, simulations must also include configurational sampling. This means that multiple configurations of liquid molecules must be simulated for each catalytic species of interest. The goal of the protocol presented here is to generate and sample trajectories of configurations of liquid water molecules around catalytic species on flat transition metal surfaces in a way that balances chemical accuracy with computational expense. Specifically, force field molecular dynamics (FFMD) simulations are used to generate configurations of liquid molecules that can subsequently be used in quantum mechanics-based methods such as density functional theory or ab initio molecular dynamics. To illustrate this, in this manuscript, the protocol is used for catalytic intermediates that could be involved in the pathway for the decomposition of glycerol (C3H8O3). The structures that are generated using FFMD are modeled in DFT in order to estimate the enthalpies of solvation of the catalytic species and to identify how H2O molecules participate in catalytic decompositions.

The goal of the protocol presented here is to generate and sample trajectories of configurations of liquid water molecules around catalytic species on a flat transition metal surface. The sampled configurations can be used as starting structures in quantum mechanics-based methods.

Türdeş olmayan su/Metal Catalyst arabirimi yoğunluğu fonksiyonel teorisi ve güç alanı moleküler dinamik kullanarak multiscale örnekleme

A significant number of heterogeneously-catalyzed chemical processes occur under liquid conditions, but simulating catalyst function under such conditions ...

Tuning the Acidity of Pt/ CNTs Catalysts for Hydrodeoxygenation of Diphenyl Ether

We herein present a method for the synthesis of HNbWO6, HNbMoO6, HTaWO6 solid acid nanosheet modified Pt/CNTs. By varying the weight of various solid acid nanosheets, a series of Pt/xHMNO6/CNTs with different solid acid compositions (x = 5, 20 wt%; M = Nb, Ta; N = Mo, W) have been prepared by carbon nanotube pretreatment, protonic exchange, solid acid exfoliation, aggregation and finally Pt particles impregnation. The Pt/xHMNO6/CNTs are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and NH3-temperature programmed desorption. The study revealed that HNbWO6 nanosheets were attached on CNTs, with some edges of the nanosheets being bent in shape. The acid strength of the supported Pt catalysts increases in the following order: Pt/CNTs &#60; Pt/5HNbWO6/CNTs &#60; Pt/20HNbMoO6/CNTs &#60; Pt/20HNbWO6/CNTs &#60; Pt/20HTaWO6/CNTs. In addition, the catalytic hydroconversion of lignin-derived model compound: diphenyl ether using the synthesized Pt/20HNbWO6 catalyst has been investigated.

A protocol for the synthesis of HNbWO6, HNbMoO6, HTaWO6 solid acid nanosheet modified Pt/CNTs is presented.

Difenil Eterhidrodeoksijenasyonu için Pt/ CNTs Katalizörlerinin Asitliğini Değiştirme

We herein present a method for the synthesis of HNbWO6, HNbMoO6, HTaWO6 solid acid nanosheet modified Pt/CNTs. By varying the weight of various solid acid ...

In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework

In situ infrared spectroscopy is an inexpensive, highly sensitive, and selective valuable tool to investigate the interaction of polycrystalline solids with adsorbates. Vibrational spectra provide information on the chemical nature of adsorbed species and their structure. Thus, they are very useful for obtaining molecular level understanding of surface species. The IR spectrum of the sample itself gives some direct information about the material. General conclusions can be drawn concerning hydroxyl groups, some stable surface species and impurities. However, the spectrum of the sample is &#34;blind&#34; with respect to the presence of coordinatively unsaturated ions and gives rather poor information about the acidity of surface hydroxyls, species decisive for the adsorption and catalytic properties of the materials. Furthermore, no discrimination between bulk and surface species can be made. These problems are solved by the use of probe molecules, substances that interact specifically with the surface; the alteration of some spectral features of these molecules as a result of adsorption provides valuable information about the nature, properties, location, concentration, etc., of the surface sites.
The experimental protocol for in-situ IR studies of gas/sample interaction includes preparation of a sample pellet, activation of the material, initial spectral characterization through the analysis of the background spectra, characterization by probe molecules, and study of the interaction with a particular set of gas mixtures. In this paper we investigate a zirconium terephthalate metal organic framework, Zr6O4(OH)4(BDC)6 (BDC = benzene-1,4-dicarboxylate), namely UiO-66 (UiO refers to University of Oslo). The acid sites of the UiO-66 sample are determined by using CO and CD3CN as molecular probes. Furthermore, we have demonstrated that CO2 is adsorbed on basic sites exposed on dehydroxylated UiO-66. Introduction of water to the system produces hydroxyl groups acting as additional CO2 adsorption sites. As a result, CO2 adsorption capacity of the sample is strongly enhanced.

In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework

The use of FTIR spectroscopy for investigation of the surface properties of polycrystalline solids is described. Preparation of sample pellets, activation procedures, characterization with probe molecules and model studies of CO2 adsorption are discussed.

In situ Gaz/Katı Etkileşiminin Araştırılmasında Bir Araç Olarak FTIR Spektroskopisi: UiO-66 Metal-Organik Çerçevede Suyla Geliştirilmiş CO2 Adsorpsiyonu

In situ infrared spectroscopy is an inexpensive, highly sensitive, and selective valuable tool to investigate the interaction of polycrystalline solids ...

Molibden Karbür Katalizörler üzerinde Asetik Asit Sıcaklık programlanmış deoksijenasyonu

Özet

Daha Fazla Video Keşfet

Bu videodaki bölümler

Aerosol destekli kimyasal Buhar biriktirme Metal Oksit yapıları: çinko oksit çubuklar

Eşzamanlı çoklu yüzey Anodizations ve merdiven gibi ters önyargıları dekolmanı anodik alüminyum oksit içinde sülfürik ve oksalik asit elektrolit

Sentez ve elektrokimyasal CO₂ azaltılması için geçiş metalleri tek Atom katalizör performans karakterizasyonu

Atom katman birikimi Vanadyum dioksit ve sıcaklık-bağımlı optik manken

Solvothermal sentez MIL-96 ve UIO-66-NH₂ atom katman üzerinde Metal oksit kaplama Fiber paspaslar üzerine yatırılır.

Kuru buz katı CO₂ kaynak olarak kullandığını mühürlü damarlarının Orta basınç elde

CO₂ fotoreğitimlik ch₄ performans altında konsantre güneş ışığı

Türdeş olmayan su/Metal Catalyst arabirimi yoğunluğu fonksiyonel teorisi ve güç alanı moleküler dinamik kullanarak multiscale örnekleme

Difenil Eterhidrodeoksijenasyonu için Pt/ CNTs Katalizörlerinin Asitliğini Değiştirme

In situ Gaz/Katı Etkileşiminin Araştırılmasında Bir Araç Olarak FTIR Spektroskopisi: UiO-66 Metal-Organik Çerçevede Suyla Geliştirilmiş CO₂ Adsorpsiyonu