5.6 : Membro de Três Forças

A rigid body subjected to three forces acting at three points is known as a three-force member. These forces must have concurrent lines of action, except for parallel forces, where the lines of action are parallel.

For example, consider a dumpster connected to a pin support at point A and a pin attached to a hydraulic cylinder at point B.

In this case, the hydraulic cylinder is a two-force member in equilibrium. The force due to the weight acts through the center of gravity and the reaction forces due to the support act at point A.

To solve for unknown forces F_A and F_CB, the first step involves creating a free-body diagram of the entire system, including all the forces acting on the dumpster.

Next, the force and moment equilibrium equations can be used to determine the values of the unknown forces.

The moment equilibrium condition at point A gives the value of the force F_CB as 24.08 kN. Meanwhile, the force equilibrium condition along the vertical direction determines the vertical reaction force F_Ay as 9.74 kN. Similarly, applying the force equilibrium condition along the horizontal direction yields the horizontal reaction force F_Ax as 25.74 kN.