저자는 줄기 세포 및 재생 의학뿐만 아니라 워싱턴 대학에서 워싱턴 나노 제조 시설에 대한 연구소의 린과 마이크 가비 이미징 연구실을 인정하고 싶습니다. 그들은 또한 건강의 국립 연구소의 재정 지원을 인정 (YZ에) DP2DK102258을 부여하고, 교육과 (MAR에) T32HL007312 (SSK 및 MAR에) T32EB001650을 부여합니다.

<ol>
	<li>Rubanyi, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+endothelium+in+cardiovascular+homeostasis+and+diseases.">The role of endothelium in cardiovascular homeostasis and diseases.</a> J. Cardiovasc. Pharmacol. 22, 37-44 (1993).</li><li>van Hinsbergh, V. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+endothelium:+vascular+control+of+haemostasis.">The endothelium: vascular control of haemostasis.</a> Eur. J. Obstet. Gynecol. Reprod. Biol. 95 (2), 198-201 (2001).</li><li>Chiu, J. -. J., Chien, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+Disturbed+Flow+on+Vascular+Endothelium:+Pathophysiological+Basis+and+Clinical+Perspectives.">Effects of Disturbed Flow on Vascular Endothelium: Pathophysiological Basis and Clinical Perspectives.</a> Physiol. Rev. 91, 327-387 (2011).</li><li>Qi, Y., Jiang, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=PDGF-BB+and+TGB-b1+on+cross-talk+between+endothelial+and+smooth+muscle+cells+in+vascular+remodeling+induced+by+low+shear+stress.">PDGF-BB and TGB-b1 on cross-talk between endothelial and smooth muscle cells in vascular remodeling induced by low shear stress.</a> Proc. Natl. Acad. Sci. U. S. A. 108, 1908-1913 (2011).</li><li>Sozzani, S., Del Prete, A., Bonecchi, R., Locati, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemokines+as+effector+and+target+molecules+in+vascular+biology.">Chemokines as effector and target molecules in vascular biology.</a> Cardiovasc. Res. 107 (3), 364-372 (2015).</li><li>Huh, D., Hamilton, G. A., Ingber, D. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+3D+cell+culture+to+organs-on-chips.">From 3D cell culture to organs-on-chips.</a> Trends Cell Biol. 21 (12), 745-754 (2011).</li><li>Staton, C. a., Reed, M. W. R., Brown, N. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+critical+analysis+of+current+in+vitro+and+in+vivo+angiogenesis+assays.">A critical analysis of current in vitro and in vivo angiogenesis assays.</a> Int. J. Exp. Pathol. 90, 195-221 (2009).</li><li>Greek, R., Menache, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Systematic+Reviews+of+Animal+Models:+Methodology+versus+Epistemology.">Systematic Reviews of Animal Models: Methodology versus Epistemology.</a> Int. J. Med. Sci. 10, 206-221 (2013).</li><li>van der Worp, H. B., Howells, D. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Can+Animal+Models+of+Disease+Reliably+Inform+Human+Studies.">Can Animal Models of Disease Reliably Inform Human Studies.</a> PLoS Med. 7 (3), e1000245 (2010).</li><li>Leong, X. -. F., Ng, C. -. Y., Jaarin, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Animal+Models+in+Cardiovascular+Research:+Hypertension+and+Atherosclerosis.">Animal Models in Cardiovascular Research: Hypertension and Atherosclerosis.</a> Biomed Res. Int. 2015, 528757 (2015).</li><li>Pries, A. R., Secomb, T. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Making+Microvascular+Networks+Work:+Angiogenesis,+Remodeling,+and+Pruning.">Making Microvascular Networks Work: Angiogenesis, Remodeling, and Pruning.</a> Physiology. 29, 446-455 (2014).</li><li>D'Amore, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanisms+Of+Angiogenesis.">Mechanisms Of Angiogenesis.</a> Annu. Rev. Physiol. 49, 453-464 (1987).</li><li>Geudens, I., Gerhardt, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coordinating+cell+behaviour+during+blood+vessel+formation.">Coordinating cell behaviour during blood vessel formation.</a> Development. 138, 4569-4583 (2011).</li><li>Ribatti, D., Nico, B., Crivellato, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+development+of+the+vascular+system:+a+historical+overview.">The development of the vascular system: a historical overview.</a> Methods Mol. Biol. 1214, 1-14 (2015).</li><li>Ribatti, D., Nico, B., Crivellato, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Morphological+and+molecular+aspects+of+physiological+vascular+morphogenesis.">Morphological and molecular aspects of physiological vascular morphogenesis.</a> Angiogenesis. 12 (2), 101-111 (2009).</li><li>Bautch, V. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=VEGF-directed+blood+vessel+patterning:+From+cells+to+organism.">VEGF-directed blood vessel patterning: From cells to organism.</a> Cold Spring Harb. Perspect. Med. 2 (9), 1-12 (2012).</li><li>Stratman, A. N., Schwindt, A. E., Malotte, K. M., Davis, G. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endothelial-derived+PDGF-BB+and+HB-EGF+coordinately+regulate+pericyte+recruitment+during+vasculogenic+tube+assembly+and+stabilization.">Endothelial-derived PDGF-BB and HB-EGF coordinately regulate pericyte recruitment during vasculogenic tube assembly and stabilization.</a> Blood. 116, 4720-4730 (2010).</li><li>Bach, T. L., Barsigian, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=VE-Cadherin+mediates+endothelial+cell+capillary+tube+formation+in+fibrin+and+collagen+gels.">VE-Cadherin mediates endothelial cell capillary tube formation in fibrin and collagen gels.</a> Exp. Cell Res. 238 (238), 324-334 (1998).</li><li>Kubow, K. E., Conrad, S. K., Horwitz, a. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Matrix+microarchitecture+and+myosin+II+determine+adhesion+in+3D+matrices.">Matrix microarchitecture and myosin II determine adhesion in 3D matrices.</a> Curr. Biol. 23 (17), 1607-1619 (2013).</li><li>Potapova, I. A., Gaudette, G. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mesenchymal+Stem+Cells+Support+Migration,+Extracellular+Matrix+Invasion,+Proliferation,+and+Survival+of+Endothelial+Cells+In+Vitro.">Mesenchymal Stem Cells Support Migration, Extracellular Matrix Invasion, Proliferation, and Survival of Endothelial Cells In Vitro.</a> Stem Cells. 25 (7), 1761-1768 (2007).</li><li>Bayless, K. J., Davis, G. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sphingosine-1-phosphate+markedly+induces+matrix+metalloproteinase+and+integrin-dependent+human+endothelial+cell+invasion+and+lumen+formation+in+three-dimensional+collagen+and+fibrin+matrices.">Sphingosine-1-phosphate markedly induces matrix metalloproteinase and integrin-dependent human endothelial cell invasion and lumen formation in three-dimensional collagen and fibrin matrices.</a> Biochem. Biophys. Res. Commun. 312 (4), 903-913 (2003).</li><li>Hellstr&#246;m, M., Gerhardt, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lack+of+pericytes+leads+to+endothelial+hyperplasia+and+abnormal+vascular+morphogenesis.">Lack of pericytes leads to endothelial hyperplasia and abnormal vascular morphogenesis.</a> J. Cell Biol. 152 (3), 543-553 (2001).</li><li>Tulloch, N. L., Muskheli, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Growth+of+Engineered+Human+Myocardium+With+Mechanical+Loading+and+Vascular+Coculture.">Growth of Engineered Human Myocardium With Mechanical Loading and Vascular Coculture.</a> Circ. Res. 109, 47-59 (2011).</li><li>Davis, G. E., Saunders, W. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+balance+of+capillary+tube+formation+versus+regression+in+wound+repair:+role+of+matrix+metalloproteinases+and+their+inhibitors.">Molecular balance of capillary tube formation versus regression in wound repair: role of matrix metalloproteinases and their inhibitors.</a> J. Investig. dermatology Symp. 11 (1), 44-56 (2006).</li><li>Kannan, R. Y., Salacinski, H. J., Butler, P. E., Hamilton, G., Seifalian, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Current+status+of+prosthetic+bypass+grafts:+a+review.">Current status of prosthetic bypass grafts: a review.</a> J. Biomed. Mater. Res. B. Appl. Biomater. 74, 570-581 (2005).</li><li>Nerem, R. M., Seliktar, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vascular+Tissue+Engineering.">Vascular Tissue Engineering.</a> Annu. Rev. Biomed. Eng. 3 (1), 225-243 (2001).</li><li>Melchiorri, A. J., Hibino, N., Fisher, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strategies+and+techniques+to+enhance+the+in+situ+endothelialization+of+small-diameter+biodegradable+polymeric+vascular+grafts.">Strategies and techniques to enhance the in situ endothelialization of small-diameter biodegradable polymeric vascular grafts.</a> Tissue Eng. Part B. Rev. 19 (4), 292-307 (2013).</li><li>Abbott, W. M., Callow, A., Moore, W., Rutherford, R., Veith, F., Weinberg, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+and+performance+standards+for+arterial+prostheses.">Evaluation and performance standards for arterial prostheses.</a> J. Vasc. Surg. 17 (4), 746-756 (1993).</li><li>Niklason, L. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+Arteries+Grown+in+Vitro.">Functional Arteries Grown in Vitro.</a> Science. 284 (5413), 489-493 (1999).</li><li>Niklason, L., Counter, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Blood+vessels+engineered+from+human+cells+-+Authors'+reply.">Blood vessels engineered from human cells - Authors' reply.</a> Lancet. 366 (9489), 892-893 (2005).</li><li>Zheng, Y., Chen, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+microvessels+for+the+study+of+angiogenesis+and+thrombosis.">In vitro microvessels for the study of angiogenesis and thrombosis.</a> Proc. Natl. Acad. Sci. U. S. A. 109, 9342-9347 (2012).</li><li>Zheng, Y., Chen, J., L&#242;pez, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flow-driven+assembly+of+VWF+fibres+and+webs+in+in+vitro+microvessels.">Flow-driven assembly of VWF fibres and webs in in vitro microvessels.</a> Nat. Commun. 6, 7858 (2015).</li><li>Ligresti, G., Nagao, R. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Novel+Three-Dimensional+Human+Peritubular+Microvascular+System.">A Novel Three-Dimensional Human Peritubular Microvascular System.</a> J. Am. Soc. Nephrol. 27, (2015).</li><li>Roberts, M. A., Tran, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stromal+cells+in+dense+collagen+promote+cardiomyocyte+and+microvascular+patterning+in+engineered+human+heart+tissue.">Stromal cells in dense collagen promote cardiomyocyte and microvascular patterning in engineered human heart tissue.</a> Tissue Eng. Part A. , (2016).</li><li>Qin, D., Xia, Y., Whitesides, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Soft+lithography+for+micro-+and+nanoscale+patterning.">Soft lithography for micro- and nanoscale patterning.</a> Nat. Protoc. 5 (3), 491-502 (2010).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alpha-Step+200+Manual.">Alpha-Step 200 Manual.</a> Tencor Instruments. , (1989).</li><li>Rajan, N., Habermehl, J., Cot&#233;, M. -. F., Doillon, C. J., Mantovani, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+ready-to-use,+storable+and+reconstituted+type+I+collagen+from+rat+tail+tendon+for+tissue+engineering+applications.">Preparation of ready-to-use, storable and reconstituted type I collagen from rat tail tendon for tissue engineering applications.</a> Nat. Protoc. 1 (6), 2753-2758 (2006).</li><li>Baudin, B., Bruneel, A., Bosselut, N., Vaubourdolle, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+protocol+for+isolation+and+culture+of+human+umbilical+vein+endothelial+cells.">A protocol for isolation and culture of human umbilical vein endothelial cells.</a> Nat. Protoc. 2 (3), 481-485 (2007).</li><li>Leung, A. D., Wong, K. H. K., Tien, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Plasma+expanders+stabilize+human+microvessels+in+microfluidic+scaffolds.">Plasma expanders stabilize human microvessels in microfluidic scaffolds.</a> J. Biomed. Mater. Res. - Part A. 100 (7), 1815-1822 (2012).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tousimis+SAMDRI-780+Critical+Point+Drying+Apparatus.">Tousimis SAMDRI-780 Critical Point Drying Apparatus.</a> Tousimis Research Corporation. , (1987).</li><li>Palpant, N. J., Pabon, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhibition+of+&#946;-catenin+signaling+respecifies+anterior-like+endothelium+into+beating+human+cardiomyocytes.">Inhibition of &#946;-catenin signaling respecifies anterior-like endothelium into beating human cardiomyocytes.</a> Development. 142 (18), 3198-3209 (2015).</li><li>Gimbrone, M. a., Topper, J. N., Nagel, T., Anderson, K. R., Garcia-Cardena, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endothelial+Dysfunction,+Hemodynamic+Forces,+and+Atherogenesis.">Endothelial Dysfunction, Hemodynamic Forces, and Atherogenesis.</a> Thromb. Haemost. 82, 722-726 (1999).</li><li>Wu, M. H., Ustinova, E., Granger, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrin+binding+to+fibronectin+and+vitronectin+maintains+the+barrier+function+of+isolated+porcine+coronary+venules.">Integrin binding to fibronectin and vitronectin maintains the barrier function of isolated porcine coronary venules.</a> J. Physiol. 532 (3), 785-791 (2001).</li><li>Ribatti, D., Nico, B., Vacca, A., Roncali, L., Dammacco, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endothelial+cell+heterogeneity+and+organ+specificity.">Endothelial cell heterogeneity and organ specificity.</a> J. Hematother. Stem Cell Res. 11, 81-90 (2002).</li><li>Shanks, N., Greek, R., Greek, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Are+animal+models+predictive+for+humans.">Are animal models predictive for humans.</a> Philos. Ethics. Humanit. Med. 4, 2 (2009).</li></ol>

저자는 공개 아무것도 없어.

엔지니어링 미세 혈관은 내강 형상, 유체 역학적 힘, 멀티 세포의 상호 작용 등의 생리 학적 특성이 존재하고 조정할 수있는 시험 관내 모델이다. 플랫폼이 유형은 모델 및 생체 외 배양 조건은 당해 미세의 것과 일치 할 수있는 다양한 상황에 내피 거동을 연구 할 수있는 기능을 제공하는 것을 강력하다. 예를 들어, 혈관 내피 세포와 같은 프로세스를 구동하는기구는, 다른 기관 등의...

각 장기 미세 혈관은 조직 미세 정의 조직 항상성을 유지하고 염증, 투자율, 혈전증과 섬유소 용해 1,2- 규제 돕는다. 5 - 미세 혈관 내피 세포, 특히 따라서 혈류와 주위 조직과의 계면은 유체 역학적 힘과 순환 사이토 카인 및 호르몬 3과 같은 자극에 응답하여 혈관 및 장기의 기능을 조절하는 데 중요한 역할을한다. 내피 세포, 혈액 사이의 상세한 상호 작용을 이해하고, 주변 조직의 미세 혈관 생물학 및 질병 진행의 연구에 중요하다. 생체 내 미세 혈관 구조에 요점을 되풀이하고 6,7를 작동하지 않습니다 시험관 도구 제한에 의해 그러나, 이러한 상호 작용을 연구의 진행을 방해하고있다. 결과적으로, 필드 및 치료의 발전은 비용이 많이 들고 시간 -에 크게​​ 의존하고10 - 종종 인간 팔의 성공을 번역하는 데 실패 동물 모델을 소비. 생체 내 모델 질환 메커니즘 및 혈관의 기능 연구에 귀중한 반면, 그들은 복잡한 종종 개인 휴대 생화학의 정확한 제어 및 생물 물리학 적 큐 부족하다. 몸 전체 혈관 최적화 관류 및 영양소 전송 동시에 11을 제공하는 광대 한 모세관 침대와 함께 성숙한 계층 구조를 보유하고있다. 처음에, 초기 개발 12, 13 중 계층 분기 네트워크 재구성 원시적 총으로 혈관 형성된다. 이러한 프로세스에 관련된 신호들의 많은 웰 (14)은 이해되지만 - 16는 혈관 패턴 (15)을 결정하는 방법 등 어려운 남아있다. 차례로, 조직 혈관 망을 설계하기 위해 시험 관내에서이 과정을 recapitulating은 꿀벌이n은 어렵다. 많은 기존의 체외 플랫폼은 두 가지 차원 내피 세포 배양으로, 같은 다세포 근접, 세 가지 차원 내강 구조, 흐름, 그리고 세포 외 기질과 같은 중요한 특성 부족, 혈관을 모델링합니다. 3D 하이드로 겔 튜브 형성 분석 (콜라겐 또는 섬유소) 17-19 또는 침공 분석 (20, 21)은 다른 혈관 17, 22 또는 조직 세포 유형 (23) 3D와의 상호 작용에서 내피 세포의 기능을 연구하는 데 사용되었다. 그러나 이러한 분석의 루멘은 상호, 혈역학 적 흐름, 적절한 관류 부족 조립. 또한, 이들 관 형성 분석법 (24) 내의 혈관 회귀 성향이 수행 될 수있다 기능 연구의 정도를 제한 장기간 배양 및 성숙을 방지한다. 따라서, 적절하게 모델링 할 수 미세 혈관 네트워크 욕실의 체외 플랫폼을 설계 할 수있는 싹 트는 필요가있다특성 dothelial 장기 배양 할 수있다. 혈관 공학 기법 다양한 혈관 질환 환자의 대체 의료용 또는 바이 영향 선박 년간 나왔다. 폴리에틸렌 테레 프탈레이트 (PET), 폴리 테트라 플루오로 에틸렌 (의 ePTFE)과 같은 합성 재료로 제조 대경 용기 장기 개통 (평균 95 %의 개통 5 년) 25 상당한 치료 성공이 있었다. 작은 직경의 합성 이식은 (&lt;6mm) 일반적으로 내막 증식 및 혈소판 (26)과 같은 합병증에 직면하지만 - 조직이 생체 물질로 만든 작은 직경 이식을 설계 (28)는, 상당한 진전 (29, 30)을 만들었습니다. 이러한 종류의 발전에도 불구하고, 마이크로에 설계 선박의 반칙으로 남아있다. 충분히 미세 혈관을 모델링하기 위해, SUF 복잡한 네트워크 패턴을 생성 할 필요가있다ficient 기계적 강도 및 개방성 실질 세포 및 세포 개조 모두 영양소 투과를 허용하는 매트릭스 조성물을 유지한다. (34) -이 프로토콜은 조정 가능한 및 제어 미세 환경 (31) 설정 생체 내에서 기본을 모방 한 새로운 인공 관류 혈관 네트워크를 제공합니다. 기술 된 방법은 100 μm의 순서에 직경 엔지니어링 미세 혈관을 생성합니다. 엔지니어링 미세 혈관은 내가 하이드로 겔 콜라겐 소프트 타입에 포함 된 미세 유체 채널을 통해 내피 세포를 관류에 의해 제조된다. 이 시스템은 오픈 내강 구조와 패턴 네트워크를 생성 다세포 상호 작용을 복제, 세포 외 기질 성분을 조절하고, 생리 학적으로 관련 혈류 역학적 힘을 적용 할 수있는 능력을 보유하고 있습니다.

<table border="0" cellpadding="0" cellspacing="0" width="1363">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:459px;">Wafer Fabrication</td>
			<td style="width:225px;"></td>
			<td style="width:140px;"></td>
			<td style="width:540px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">AutoGlow Plasma System</td>
			<td>AutoGlow</td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Headway Spin Coater</td>
			<td>Headway Research, Inc&#160;</td>
			<td colspan="2">PWM32 Spin Coater&#160;</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">ABM Contact Aligner</td>
			<td>AB-M</td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Alpha Step Profilometer</td>
			<td>Tencor</td>
			<td>Alpha Step 200</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">SU-8 Developer</td>
			<td>Microchem</td>
			<td>Y020100</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">SU-8 Resist</td>
			<td>Microchem</td>
			<td>SU-8 2000</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">8&#34; silicon wafer</td>
			<td>Wafer World Inc.</td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Tabletop Micro Pattern Generator</td>
			<td>Heidelberg Instruments</td>
			<td>&#956;PG 101</td>
			<td>For generation of photomask</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Hot plate</td>
			<td>VWR</td>
			<td>97042-646</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Ispropyl alcohol</td>
			<td>Avantor Performance Materials</td>
			<td>9088</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Petri dishes (120 x 120 mm, square)</td>
			<td>Sigma-Aldrich</td>
			<td>Z617679</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Trichloro(3,3,3-trifluoropropyl)silane</td>
			<td>Sigma-Aldrich</td>
			<td>MKBG3805V</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Polydimethylsiloxane (PDMS) elastomer base and curing agent</td>
			<td>Dow Corning</td>
			<td>Sylgard 184</td>
			<td>Mixed at 10:1 (w/w)</td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Vacuum desiccator</td>
			<td>Sigma-Aldrich</td>
			<td>Z119024-1EA</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Oven</td>
			<td>VWR</td>
			<td>9120976</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Device Fabrication and Culture</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">poly(methyl methacrylate) (PMMA)</td>
			<td>Plexiglas</td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Corona Treater</td>
			<td>Electro-Technic Products, Inc.</td>
			<td>BD-20</td>
			<td>Handheld device for plasma treatment of PMMA devices and PDMS molds</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Soldering Iron</td>
			<td>Weller&#160;</td>
			<td>WTCPS</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Stainless Steel Truss Head Slotted Machine Screw</td>
			<td>McMaster-Carr&#160;</td>
			<td>91785A096</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Stainless steel dowel pins</td>
			<td>McMaster-Carr&#160;</td>
			<td>93600A060</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Tweezers&#160;</td>
			<td>Miltex</td>
			<td>24-572</td>
			<td>Any similar tweezers may be used</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Spatula (Micro Spoon)</td>
			<td>Electron Microscopy Services</td>
			<td>62410-01</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Screw driver</td>
			<td></td>
			<td></td>
			<td>Any flat head screwdriver may be used, autoclaved</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Glass coverslips (22 x 22 mm)</td>
			<td>Fisher Scientific</td>
			<td>12-542B</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Bleach</td>
			<td>Clorox</td>
			<td>4460030966</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Petri dishes (150 X 25mm)</td>
			<td>Corning</td>
			<td>430599</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Petri dishes (100 X 20 mm)</td>
			<td>Corning</td>
			<td>2909</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Cotton, cut into 1 cm x 3 cm pieces</td>
			<td></td>
			<td></td>
			<td>Autoclaved</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Polyethyleneimine (PEI)</td>
			<td>Sigma-Aldrich</td>
			<td>P3143</td>
			<td>Dilute to 1% in cell culture grade water</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Glutaraldehyde</td>
			<td>Sigma-Aldrich</td>
			<td>G6257</td>
			<td>Dilute to 0.1% in cell culture grade water</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:26px;">Sterile H2O</td>
			<td></td>
			<td></td>
			<td>Autoclaved DI H2O</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Type I collagen, dissolved in 0.1% acetic acid</td>
			<td></td>
			<td></td>
			<td>Isolated from rat tails as described in Rajan et. al. 2006 (ref #37)</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">1 mL syringe</td>
			<td>BD</td>
			<td>309659</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">10 mL syringe</td>
			<td>BD</td>
			<td>309604</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">15 mL conical tubes</td>
			<td>Corning</td>
			<td>352097</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">30 mL conical tubes</td>
			<td>Corning</td>
			<td>352098</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">M199 10X Media&#160;</td>
			<td>Life Technologies</td>
			<td>11825-015</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">1N NaOH (sterile)</td>
			<td>Sigma-Aldrich</td>
			<td>415413</td>
			<td>Dilute to 1N in cell culture grade water</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HUVECs&#160;</td>
			<td>Lonza</td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Endothelial growth media</td>
			<td>Lonza</td>
			<td>CC-3124</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Trypsin</td>
			<td>Corning</td>
			<td>25-052-CI</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Fetal bovine serum (FBS)</td>
			<td>Thermofisher Scientific</td>
			<td>10082147</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Dextran from Leuconostoc spp. (70kDa)</td>
			<td>Sigma-Aldrich</td>
			<td>31390</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Phosphate Buffered Saline (PBS)</td>
			<td>Corning</td>
			<td>21-031-CV</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Hemocytometer</td>
			<td>Hausser Scientific Co.</td>
			<td>3200</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Gel loading tips</td>
			<td>VWR</td>
			<td>37001-152</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">18G Blunt Fill Needle</td>
			<td>BD&#160;</td>
			<td>305180</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">20G Stainless Steel Dispensing Needle</td>
			<td>McMaster-Carr</td>
			<td>75165A123</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Tygon 1/32&#8221; ID, 3/32&#34; OD Silicon Tubing</td>
			<td>Cole-Parmer</td>
			<td>EW-95702-00</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">1/16&#34; Tube-to-tube Coupling</td>
			<td>McMaster-Carr</td>
			<td>5116K165</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">90&#176; Elbow Connectors, Tube-to-Tube</td>
			<td>McMaster-Carr</td>
			<td>5121K901</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Luer Lock Coupling (Female, 1/16&#34; ID)</td>
			<td>McMaster-Carr</td>
			<td>51525K211</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Plastic Forceps, with Jaw Grips</td>
			<td>Electron Microscopy Services</td>
			<td>72971</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Dual Syringe Pump</td>
			<td>Harvard Apparatus</td>
			<td>70-4505</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">5 mL Polystyrene Round-bottom tube</td>
			<td>Fisher Scientific</td>
			<td>14-959-2A</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Device Analysis</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Formaldehyde</td>
			<td>Sigma-Aldrich</td>
			<td>F8775</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Bovine Serum Albumin</td>
			<td>Sigma-Aldrich</td>
			<td>A8806-5G</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Triton X-100</td>
			<td>Sigma-Aldrich</td>
			<td>T-9284</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Rabbit anti-hCD31</td>
			<td>Abcam</td>
			<td>ab32457</td>
			<td>1:25 working dilution</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">FITC conjugated anti-von Willebrand Factor antibody</td>
			<td>Abcam</td>
			<td>ab8822</td>
			<td>1:100 working dilution</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Goat anti-rabbit 568 secondary antibody</td>
			<td>Thermofisher Scientific</td>
			<td>A-11011</td>
			<td>1:100 working dilution</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Hoescht</td>
			<td>Thermofisher Scientific</td>
			<td>H1399</td>
			<td>Resuspended in DMSO</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Sodium cacodylate&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>C0250</td>
			<td>To make 0.2M cacodylate buffer</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Ethanol</td>
			<td>VWR International</td>
			<td>BDH1164-4LP</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">40kDa FITC-conjugated Dextran</td>
			<td>Sigma-Aldrich</td>
			<td>FD40S&#160;</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Additional Culture Reagents&#160;</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">CHIR-99021</td>
			<td>Selleck Chem</td>
			<td>S2924</td>
			<td>Small molecule GSK-3 inhibitor</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Human recombinant VEGF</td>
			<td>Peprotech</td>
			<td>100-20</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Human recombinant bFGF</td>
			<td>Peprotech</td>
			<td>AF-100-18B</td>
			<td></td>
		</tr>
	</tbody>
</table>

micropatterning and assembly of 3d microvessels

시험관 플랫폼에서, 내피 세포 및 혈관 생물학은 주로 2D 내피 세포 배양으로 제한됩니다 공부 폴리머 또는 유리 기반의 기판과 하이드로 겔 기반 관 형성 분석과 챔버 흐름. 이러한 분석은, 유익한 동안, 혈관 기능 조절에 중요​​한 역할을 루멘 형상, 적절한 세포 외 기질 및 다세포 근접, 요점을 되풀이하지 않습니다. 이 논문은 100 ㎛의 정도의 직경을 갖는 엔지니어링 혈관을 생성하는 사출 성형 방법을 설명한다. 미세 혈관은 내가 하이드로 겔 콜라겐 기본 유형에 포함 미세 유체 채널 내피 세포를 파종하여 제조된다. 형성 채널 이전에 콜라겐 매트릭스 내에 실질 세포를 통합함으로써, 특정 조직의 미세 환경을 모델링하고 공부하실 수 있습니다. 유체 역학적 특성 및 미디어 조성물의 추가 변조 원하는 미세 환경 내에서 복잡한 혈관 기능을 제어 할 수 있습니다.이 플랫폼은 혈관 주위 세포 모집, 혈액 내피 세포의 상호 작용, 흐름 응답 및 조직 미세 혈관의 상호 작용 연구를 위해 수 있습니다. 엔지니어링 미세 혈관은 혈관 틈새 시장의 개별 구성 요소의 영향을 분리 할 수​​있는 기능을 제공하고 정확하게 건강과 질병에 모두 혈관 생물학을 연구하기 위해 화학적, 기계적, 생물학적 특성을 제어 할 수 있습니다.

조작 된 선박 플랫폼은 내가 매트릭스 천연 콜라겐 유형에 내장 된 기능성 미세 혈관을 생성하고 체외에서 세포 생물 물리학 및 생화학 적 환경의 꽉 제어 할 수 있습니다. 설계 미세 혈관을 제조하기 위해, 인간 제대 정맥 내피 세포 (HUVECs를이)가 특허 루멘과 합류 내피 세포를 형성하기 위해 부착 콜라겐 포함 된 미세 유체 네트워크를 통해 관류한다. 도 1A-C?...

Watch this Scientific Journal Video about Micropatterning and Assembly of 3D Microvessels at JoVE.com

Micropatterning and Assembly of 3D Microvessels

이 논문은 내피 세포의 생리 학적 특성을 요점을 되풀이 미세 혈관을 설계하는 사출 성형 방법을 제공한다. 미세 유체 기반의 공정은 흐름, 세포 성분, 형상, 생화학 그라디언트로 테일러 조건과 특허 3 차원 혈관 네트워크를 생성합니다. 제조 공정 및 잠재적 응용 예들이 설명된다.

미세화 및 3D 미세 혈관의 조립

In vitro platforms to study endothelial cells and vascular biology are largely limited to 2D endothelial cell culture, flow chambers with polymer or glass ...

micropatterning-and-assembly-of-3d-microvessels

Universidad de Cartagena UDEC

Research

JoVE Journal

Bioengineering

11.7K 조회수.  University of Washington.  이 논문은 내피 세포의 생리 학적 특성을 요점을 되풀이 미세 혈관을 설계하는 사출 성형 방법을 제공한다. 미세 유체 기반의 공정은 흐름, 세포 성분, 형상, 생화학 그라디언트로 테일러 조건과 특허 3 차원 혈관 네트워크를 생성합니다. 제조 공정 및 잠재적 응용 예들이 설명된다. 

비디오: Micropatterning and Assembly of 3D Microvessels

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.

A method to obtain nanofibers and complex nanostructures from single or multiple extracellular matrix proteins is described. This method uses protein-surface interactions to create free-standing protein-based materials with tunable composition and architecture for use in a variety of tissue engineering and biotechnology applications.

ECM 단백질 나노 섬유 및 나노 구조 엔지니어링 사용하여 표면 시작 회의

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber ...

연구

생체공학

Preparation of 3D Collagen Gels and Microchannels for the Study of 3D Interactions In Vivo

Historically, most cellular processes have been studied in only 2 dimensions. While these studies have been informative about general cell signaling mechanisms, they neglect important cellular cues received from the structural and mechanical properties of the local microenvironment and extracellular matrix (ECM). To understand how cells interact within a physiological ECM, it is important to study them in the context of 3 dimensional assays. Cell migration, cell differentiation, and cell proliferation are only a few processes that have been shown to be impacted by local changes in the mechanical properties of a 3-dimensional ECM. Collagen I, a core fibrillar component of the ECM, is more than a simple structural element of a tissue. Under normal conditions, mechanical cues from the collagen network direct morphogenesis and maintain cellular structures. In diseased microenvironments, such as the tumor microenvironment, the collagen network is often dramatically remodeled, demonstrating altered composition, enhanced deposition and altered fiber organization. In breast cancer, the degree of fiber alignment is important, as an increase in aligned fibers perpendicular to the tumor boundary has been correlated to poorer patient prognosis1. Aligned collagen matrices result in increased dissemination of tumor cells via persistent migration2,3. The following is a simple protocol for embedding cells within a 3-dimensional, fibrillar collagen hydrogel. This protocol is readily adaptable to many platforms, and can reproducibly generate both aligned and random collagen matrices for investigation of cell migration, cell division, and other cellular processes in a tunable, 3-dimensional, physiological microenvironment.

Preparation of 3D Collagen Gels and Microchannels for the Study of 3D Interactions In Vivo

Collagen is a core component of the ECM, and provides essential cues for several cellular processes ranging from migration to differentiation and proliferation. Provided here is a protocol for embedding cells within 3D collagen hydrogels, and a more advanced technique for generating randomized or aligned collagen matrices using PDMS microchannels.

3D 상호 작용의 연구에 대한 3D 콜라겐 젤과 마이크로 채널 준비<em&gt; 생체</em

Historically, most cellular processes have been studied in only 2 dimensions.  While these studies have been informative about general cell signaling ...

Automated Robotic Liquid Handling Assembly of Modular DNA Devices

Recent advances in modular DNA assembly techniques have enabled synthetic biologists to test significantly more of the available &#34;design space&#34; represented by &#34;devices&#34; created as combinations of individual genetic components. However, manual assembly of such large numbers of devices is time-intensive, error-prone, and costly. The increasing sophistication and scale of synthetic biology research necessitates an efficient, reproducible way to accommodate large-scale, complex, and high throughput device construction.
Here, a DNA assembly protocol using the Type-IIS restriction endonuclease based Modular Cloning (MoClo) technique is automated on two liquid-handling robotic platforms. Automated liquid-handling robots require careful, often times tedious optimization of pipetting parameters for liquids of different viscosities (e.g. enzymes, DNA, water, buffers), as well as explicit programming to ensure correct aspiration and dispensing of DNA parts and reagents. This makes manual script writing for complex assemblies just as problematic as manual DNA assembly, and necessitates a software tool that can automate script generation. To this end, we have developed a web-based software tool, http://mocloassembly.com, for generating combinatorial DNA device libraries from basic DNA parts uploaded as Genbank files. We provide access to the tool, and an export file from our liquid handler software which includes optimized liquid classes, labware parameters, and deck layout. All DNA parts used are available through Addgene, and their digital maps can be accessed via the Boston University BDC ICE Registry. Together, these elements provide a foundation for other organizations to automate modular cloning experiments and similar protocols.
The automated DNA assembly workflow presented here enables the repeatable, automated, high-throughput production of DNA devices, and reduces the risk of human error arising from repetitive manual pipetting. Sequencing data show the automated DNA assembly reactions generated from this workflow are ~95% correct and require as little as 4% as much hands-on time, compared to manual reaction preparation.

Here, an automated workflow to perform modular DNA &#34;device&#34; assembly using a modular cloning DNA assembly method on liquid-handling robots is presented. The protocol uses an intuitive software tool for generating liquid handler picklists for combinatorial DNA device library generation, which we demonstrate using two liquid handling platforms.

모듈형 DNA 장치 조립 로봇 액체 처리 자동화

Recent advances in modular DNA assembly techniques have enabled synthetic biologists to test significantly more of the available &#34;design space&#34; ...

Synthesis of Cationized Magnetoferritin for Ultra-fast Magnetization of Cells

Many important biomedical applications, such as cell imaging and remote manipulation, can be achieved by labeling cells with superparamagnetic iron oxide nanoparticles (SPIONs). Achieving sufficient cellular uptake of SPIONs is a challenge that has traditionally been met by exposing cells to elevated concentrations of SPIONs or by prolonging exposure times (up to 72 hr). However, these strategies are likely to mediate toxicity. Here, we present the synthesis of the protein-based SPION magnetoferritin as well as a facile surface functionalization protocol that enables rapid cell magnetization using low exposure concentrations. The SPION core of magnetoferritin consists of cobalt-doped iron oxide with an average particle diameter of 8.2 nm mineralized inside the cavity of horse spleen apo-ferritin. Chemical cationization of magnetoferritin produced a novel, highly membrane-active SPION that magnetized human mesenchymal stem cells (hMSCs) using incubation times as short as one minute and iron concentrations as lows as 0.2 mM.

A protocol for the synthesis and cationization of cobalt-doped magnetoferritin is presented, as well as a method to rapidly magnetize stem cells with cationized magnetoferritin.

세포의 초고속 자화에 대한 양이온 Magnetoferritin의 합성

Many important biomedical applications, such as cell imaging and remote manipulation, can be achieved by labeling cells with superparamagnetic iron oxide ...

Assembly and Tracking of Microbial Community Development within a Microwell Array Platform

The development of microbial communities depends on a combination of complex deterministic and stochastic factors that can dramatically alter the spatial distribution and activities of community members. We have developed a microwell array platform that can be used to rapidly assemble and track thousands of bacterial communities in parallel. This protocol highlights the utility of the platform and describes its use for optically monitoring the development of simple, two-member communities within an ensemble of arrays within the platform. This demonstration uses two mutants of Pseudomonas aeruginosa, part of a series of mutants developed to study Type VI secretion pathogenicity. Chromosomal inserts of either mCherry or GFP genes facilitate the constitutive expression of fluorescent proteins with distinct emission wavelengths that can be used to monitor community member abundance and location within each microwell. This protocol describes a detailed method for assembling mixtures of bacteria into the wells of the array and using time-lapse fluorescence imaging and quantitative image analysis to measure the relative growth of each member population over time. The seeding and assembly of the microwell platform, the imaging procedures necessary for the quantitative analysis of microbial communities within the array, and the methods that can be used to reveal interactions between microbial species area all discussed.

The development of microbial communities depends on a combination of factors, including environmental architecture, member abundance, traits, and interactions. This protocol describes a synthetic, microfabricated environment for the simultaneous tracking of thousands of communities contained in femtoliter wells, where key factors such as niche size and confinement can be approximated.

마이크로 웰 어레이 플랫폼 내 미생물 공동체 개발의 구성 및 추적

The development of microbial communities depends on a combination of complex deterministic and stochastic factors that can dramatically alter the spatial ...

Bioprinting of Cartilage and Skin Tissue Analogs Utilizing a Novel Passive Mixing Unit Technique for Bioink Precellularization

Bioprinting is a powerful technique for the rapid and reproducible fabrication of constructs for tissue engineering applications. In this study, both cartilage and skin analogs were fabricated after bioink pre-cellularization utilizing a novel passive mixing unit technique. This technique was developed with the aim to simplify the steps involved in the mixing of a cell suspension into a highly viscous bioink. The resolution of filaments deposited through bioprinting necessitates the assurance of uniformity in cell distribution prior to printing to avoid the deposition of regions without cells or retention of large cell clumps that can clog the needle. We demonstrate the ability to rapidly blend a cell suspension with a bioink prior to bioprinting of both cartilage and skin analogs. Both tissue analogs could be cultured for up to 4 weeks. Histological analysis demonstrated both cell viability and deposition of tissue specific extracellular matrix (ECM) markers such as glycosaminoglycans (GAGs) and collagen I respectively.

Cartilage and skin analogs were bioprinted using a nanocellulose-alginate based bioink. The bioinks were cellularized prior to printing via a single step passive mixing unit. The constructs were demonstrated to be uniformly cellularized, have high viability, and exhibit favorable markers of differentiation.

연골과 피부 조직 아날로그 소설 수동 Bioink Precellularization에 대 한 단위 기술 혼합을 이용 하 여 Bioprinting

Bioprinting is a powerful technique for the rapid and reproducible fabrication of constructs for tissue engineering applications. In this study, both ...

Fabrication of Custom Agarose Wells for Cell Seeding and Tissue Ring Self-assembly Using 3D-Printed Molds

Engineered tissues are being used clinically for tissue repair and replacement, and are being developed as tools for drug screening and human disease modeling. Self-assembled tissues offer advantages over scaffold-based tissue engineering, such as enhanced matrix deposition, strength, and function. However, there are few available methods for fabricating 3D tissues without seeding cells on or within a supporting scaffold. Previously, we developed a system for fabricating self-assembled tissue rings by seeding cells into non-adhesive agarose wells. A polydimethylsiloxane (PDMS) negative was first cast in a machined polycarbonate mold, and then agarose was gelled in the PDMS negative to create ring-shaped cell seeding wells. However, the versatility of this approach was limited by the resolution of the tools available for machining the polycarbonate mold. Here, we demonstrate that 3D-printed plastic can be used as an alternative to machined polycarbonate for fabricating PDMS negatives. The 3D-printed mold and revised mold design is simpler to use, inexpensive to produce, and requires significantly less agarose and PDMS per cell seeding well. We have demonstrated that the resulting agarose wells can be used to create self-assembled tissue rings with customized diameters from a variety of different cell types. Rings can then be used for mechanical, functional, and histological analysis, or for fabricating larger and more complex tubular tissues.

This protocol describes a platform for fabricating self-assembled tissue rings in variable sizes using a customized 3D-printed plastic mold. PDMS negatives are cured in the 3D-printed mold; then agarose is cast in the cured PDMS negatives. Cells are seeded into the resulting agarose wells where they aggregate into tissue rings.

셀 시드를 위한 사용자 지정 Agarose 우물 및 자기 조립 금형 3D 인쇄를 사용 하 여 조직 반지 제작

Engineered tissues are being used clinically for tissue repair and replacement, and are being developed as tools for drug screening and human disease ...

Assembly and Characterization of Biomolecular Memristors Consisting of Ion Channel-doped Lipid Membranes

The ability to recreate synaptic functionalities in synthetic circuit elements is essential for neuromorphic computing systems that seek to emulate the cognitive powers of the brain with comparable efficiency and density. To date, silicon-based three-terminal transistors and two-terminal memristors have been widely used in neuromorphic circuits, in large part due to their ability to co-locate information processing and memory. Yet these devices cannot achieve the interconnectivity and complexity of the brain because they are power-hungry, fail to mimic key synaptic functionalities, and suffer from high noise and high switching voltages. To overcome these limitations, we have developed and characterized a biomolecular memristor that mimics the composition, structure, and switching characteristics of biological synapses. Here, we describe the process of assembling and characterizing biomolecular memristors consisting of a 5 nm-thick lipid bilayer formed between lipid-functionalized water droplets in oil and doped with voltage-activated alamethicin peptides. While similar assembly protocols have been used to investigate biophysical properties of droplet-supported lipid membranes and membrane-bound ion channels, this article focuses on key modifications of the droplet interface bilayer method essential for achieving consistent memristor performance. Specifically, we describe the liposome preparation process and the incorporation of alamethicin peptides in lipid bilayer membranes, and the appropriate concentrations of each constituent as well as their impact on the overall response of the memristors. We also detail the characterization process of biomolecular memristors, including measurement and analysis of memristive current-voltage relationships obtained via cyclic voltammetry, as well as short-term plasticity and learning in response to step-wise voltage pulse trains.

Soft, low-power, biomolecular memristors leverage similar composition, structure, and switching mechanisms of bio-synapses. Presented here is a protocol to assemble and characterize biomolecular memristors obtained from insulating lipid bilayers formed between water droplets in oil. The incorporation of voltage-activated alamethicin peptides results in memristive ionic conductance across the membrane.

The ability to recreate synaptic functionalities in synthetic circuit elements is essential for neuromorphic computing systems that seek to emulate the ...

Protocols of 3D Bioprinting of Gelatin Methacryloyl Hydrogel Based Bioinks

Gelatin methacryloyl (GelMA) has become a popular biomaterial in the field of bioprinting. The derivation of this material is gelatin, which is hydrolyzed from mammal collagen. Thus, the arginine-glycine-aspartic acid (RGD) sequences and target motifs of matrix metalloproteinase (MMP) remain on the molecular chains, which help achieve cell attachment and degradation. Furthermore, formation properties of GelMA are versatile. The methacrylamide groups allow a material to become rapidly crosslinked under light irradiation in the presence of a photoinitiator. Therefore, it makes great sense to establish suitable methods for synthesizing three-dimensional (3D) structures with this promising material. However, its low viscosity restricts GelMA's printability. Presented here are methods to carry out 3D bioprinting of GelMA hydrogels, namely the fabrication of GelMA microspheres, GelMA fibers, GelMA complex structures, and GelMA-based microfluidic chips. The resulting structures and biocompatibility of the materials as well as the printing methods are discussed. It is believed that this protocol may serve as a bridge between previously applied biomaterials and GelMA as well as contribute to the establishment of GelMA-based 3D architectures for biomedical applications.

Presented here is a method for the 3D bioprinting of gelatin methacryloyl.

젤라틴 메타크릴 하이드로겔 기반 바이오잉크의 3D 바이오프린팅 프로토콜

Gelatin methacryloyl (GelMA) has become a popular biomaterial in the field of bioprinting. The derivation of this material is gelatin, which is hydrolyzed ...

Temperature-Controlled Assembly and Characterization of a Droplet Interface Bilayer

The droplet interface bilayer (DIB) method for assembling lipid bilayers (i.e., DIBs) between lipid-coated aqueous droplets in oil offers key benefits versus other methods: DIBs are stable and often long-lasting, bilayer area can be reversibly tuned, leaflet asymmetry is readily controlled via droplet compositions, and tissue-like networks of bilayers can be obtained by adjoining many droplets. Forming DIBs requires spontaneous assembly of lipids into high density lipid monolayers at the surfaces of the droplets. While this occurs readily at room temperature for common synthetic lipids, a sufficient monolayer or stable bilayer fails to form at similar conditions for lipids with melting points above room temperature, including some cellular lipid extracts. This behavior has likely limited the compositions&#8212;and perhaps the biological relevance&#8212;of DIBs in model membrane studies. To address this problem, an experimental protocol is presented to carefully heat the oil reservoir hosting DIB droplets and characterize the effects of temperature on the lipid membrane. Specifically, this protocol shows how to use a thermally conductive aluminum fixture and resistive heating elements controlled by a feedback loop to prescribe elevated temperatures, which improves monolayer assembly and bilayer formation for a wider set of lipid types. Structural characteristics of the membrane, as well as the thermotropic phase transitions of the lipids comprising the bilayer, are quantified by measuring the changes in electrical capacitance of the DIB. Together, this procedure can aid in evaluating biophysical phenomena in model membranes over various temperatures, including determining an effective melting temperature (TM) for multi-component lipid mixtures. This capability will thus allow for closer replication of natural phase transitions in model membranes and encourage the formation and use of model membranes from a wider swath of membrane constituents, including those that better capture the heterogeneity of their cellular counterparts.

This protocol details the use of a feedback temperature-controlled heating system to promote lipid monolayer assembly and droplet interface bilayer formation for lipids with elevated melting temperatures, and capacitance measurements to characterize temperature-driven changes in the membrane.

온도 제어 어셈블리 및 방울 인터페이스 Bilayer의 특성화

The droplet interface bilayer (DIB) method for assembling lipid bilayers (i.e., DIBs) between lipid-coated aqueous droplets in oil offers key benefits ...