SN은 피츠버그 조직 공학 이니셔티브에서 박사 과정 이수 화목 그랜트에 의해 지원되었다. DOZ는 제네바 재단에서 수여 교부금에 의해 지원됩니다.

<ol>
	<li>Natesan, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+bilayer+construct+controls+adipose-derived+stem+cell+differentiation+into+endothelial+cells+and+pericytes+without+growth+factor+stimulation.">A bilayer construct controls adipose-derived stem cell differentiation into endothelial cells and pericytes without growth factor stimulation.</a> Tissue Eng. Part A. 17, 941-953 (2011).</li><li>Nuttelman, C. R., Tripodi, M. C., Anseth, K. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+hydrogel+niches+that+promote+hMSC+viability.">Synthetic hydrogel niches that promote hMSC viability.</a> Matrix Biol. 24, 208-218 (2005).</li><li>Benoit, D. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrin-linked+kinase+production+prevents+anoikis+in+human+mesenchymal+stem+cells.">Integrin-linked kinase production prevents anoikis in human mesenchymal stem cells.</a> J Biomed Mater Res A. 81, 259-268 (2007).</li><li>Willerth, S. M., Sakiyama-Elbert, S. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combining+stem+cells+and+biomaterial+scaffolds+for+constructing+tissues+and+cell+delivery.">Combining stem cells and biomaterial scaffolds for constructing tissues and cell delivery.</a> , (2008).</li><li>Natesan, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adipose-derived+stem+cell+delivery+into+collagen+gels+using+chitosan+microspheres.">Adipose-derived stem cell delivery into collagen gels using chitosan microspheres.</a> Tissue Eng. Part A. 16, 1369-1384 (2010).</li><li>Bubnis, W. A., Ofner, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+determination+of+epsilon-amino+groups+in+soluble+and+poorly+soluble+proteinaceous+materials+by+a+spectrophotometric+method+using+trinitrobenzenesulfonic+acid.">The determination of epsilon-amino groups in soluble and poorly soluble proteinaceous materials by a spectrophotometric method using trinitrobenzenesulfonic acid.</a> Anal. Biochem. 207, 129-133 (1992).</li><li>Zhang, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+PEGylated+fibrin+patch+for+mesenchymal+stem+cell+delivery.">A PEGylated fibrin patch for mesenchymal stem cell delivery.</a> Tissue Eng. 12, 9-19 (2006).</li><li>Bornstein, M. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reconstituted+rattail+collagen+used+as+substrate+for+tissue+cultures+on+coverslips+in+Maximow+slides+and+roller+tubes.">Reconstituted rattail collagen used as substrate for tissue cultures on coverslips in Maximow slides and roller tubes.</a> Lab Invest. 7, 134-137 (1958).</li><li>Zhang, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vascular+differentiation+of+bone+marrow+stem+cells+is+directed+by+a+tunable+three-dimensional+matrix.">Vascular differentiation of bone marrow stem cells is directed by a tunable three-dimensional matrix.</a> Acta Biomater. 6, 3395-3403 (2010).</li><li>Rochon, M. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Normal+human+epithelial+cells+regulate+the+size+and+morphology+of+tissue-engineered+capillaries.">Normal human epithelial cells regulate the size and morphology of tissue-engineered capillaries.</a> Tissue Eng. Part A. 16, 1457-1468 (2010).</li><li>Liu, H., Collins, S. F., Suggs, L. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+culture+for+expansion+and+differentiation+of+mouse+embryonic+stem+cells.">Three-dimensional culture for expansion and differentiation of mouse embryonic stem cells.</a> Biomaterials. 27, 6004-6014 (2006).</li></ol>

어떤 경쟁하는 금융 이익은 존재하지. 유의 사항 여기에 포함된 의견이나 주장은 저자의 개인 의견이며 공식이나 국방 또는 미국 정부 부서의 의견을 반영 해석할 수 없습니다. 저자는 미국 정부의 직원이며,이 작품들은 공무의 일환으로 준비되었다. 모든 작품은 미국 육군 의학 연구 및 Materiel 명령에 의해 지원되었다. 이 연구는 미국 육군 의학 연구 및 Materiel 명령 기관 심사위원회 및 승인 절차에 따라 검토와 승인 절차하에 실시되었다.

ASCs은 고립과 다양한 세포 유형으로 차별화할 수있는 능력 자신의 용이성에 대해 잘 알려져 있습니다. 본 원고에서 설명한 기법을 통해, 우리는 동시에 여러 biomatrices 이러한 세포를 노출함으로써 ASCs의 소성을 이용하실 수 있습니다. 세포가 자신의 CSM베이스에서 떨어져 마이 그 레이션과 그 주변의 세포외 환경을 입력할 때, 세포는 비계에서 실수를 타고 중 &quot;stemness&quot;(콜라겐)을 유지하거나 ...

<table border="1"><tbody><tr><td> 시약 / 장비의 명칭 </td><td> 회사 </td><td> 카탈로그 번호 </td><td> 댓글 </td></tr><tr><td> 행크스 균형 소금 솔루션 (HBSS) </td><td> Gibco </td><td> 14,175 </td><td> 소모품 </td></tr><tr><td> 태아 소 혈청 </td><td> Hyclone </td><td> SH30071.03 </td><td> 소모품 </td></tr><tr><td> Collagenase 타입 II </td><td> 시그마 - 올드 리치 </td><td> C6685 </td><td> 소모품 </td></tr><tr><td> 70 μm의 나일론 메쉬 필터 </td><td> BD Biosciences </td><td> 352,350 </td><td> 소모품 </td></tr><tr><td> 100 μm의 나일론 메쉬 필터 </td><td> BD Biosciences </td><td> 352,360 </td><td> 소모품 </td></tr><tr><td> MesenPRO 성장 매체 시스템 </td><td> Invitrogen </td><td> 12746-012 </td><td> 소모품 </td></tr><tr><td> L-글루타민 </TD&gt; <td> Gibco </td><td> 25,030 </td><td> 소모품 </td></tr><tr><td> CaCl 2 0.2 H 2 O </td><td> 시그마 </td><td> C8106 </td><td> 소모품 </td></tr><tr><td> T75 조직 배양 플라스크 </td><td> BD Biosciences </td><td> 137,787 </td><td> 소모품 </td></tr><tr><td> 키토산 </td><td> 시그마 - 올드 리치 </td><td> 448,869 </td><td> 소모품 </td></tr><tr><td> 초산 </td><td> 시그마 - 올드 리치 </td><td> 320,099 </td><td> 소모품 </td></tr><tr><td> N-Octanol </td><td> Acros의 생명체 </td><td> 150,630,025 </td><td> 소모품 </td></tr><tr><td> 솔비 - 모노 Oleate </td><td> 시그마 - 올드 리치 </td><td> S6760 </td><td> 소모품 </td></tr><tr><td> 수산화 칼륨 </td><td> 시그마 - 올드 리치 </td><td> P1767 </td><td> 소모품 </td></tr><tr><td> 아세톤 </td><td> 피셔 과학 </td><td> L-4859 </td><td> 소모품 </td></tr><tr><td> 에탄올 </td><td> 시그마 - 올드 리치 </td><td> 270,741 </td><td> 소모품 </td></tr><tr><td> Trinitro Benzenesulfonic 산성 </td><td> 시그마 - 올드 리치 </td><td> P2297 </td><td> 소모품 </td></tr><tr><td> 염산 </td><td> 시그마 - 올드 리치 </td><td> 320,331 </td><td> 소모품 </td></tr><tr><td> 에틸 에테르 </td><td> 시그마 - 올드 리치 </td><td> 472-484 </td><td> 소모품 </td></tr><tr><td> 8 μm의 조직 문화 플레이트 삽입물 </td><td> BD Biosciences </td><td> 353,097 </td><td> 소모품 </td></tr><tr><td> 1.5 ML의 Microcentrifuge 튜브 </td><td> 어부 </td><td> 05-408-129 </td><td> 소모품 </td></tr><tr><td> MTT 시약 </td><td> Invitrogen </td><td> M6494 </td><td> 소모품 </td></tr><tr><td> 디메틸 Sulfoxide </td><td> 시그마 - 올드 리치 </td><td> D8779 </td><td> 소모품 </td></tr><tr><td> Qtracker 셀 라벨 키트 (Q트래커 655) </td><td> 분자 프로브 </td><td> Q2502PMP </td><td> 소모품 </td></tr><tr><td> 한 콜라겐을 입력 </td><td> Travigen </td><td> 3447-020-01 </td><td> 소모품 </td></tr><tr><td> 수산화 나트륨 </td><td> 시그마 - 올드 리치 </td><td> S8045 </td><td> 소모품 </td></tr><tr><td> 12 음 조직 배양 플레이트 </td><td> BD Biosciences </td><td> 353,043 </td><td> 소모품 </td></tr><tr><td> 피브리노겐 </td><td> 시그마 </td><td> F3879 </td><td> 소모품 </td></tr><tr><td> 트롬빈 </td><td> 시그마 </td><td> T6884 </td><td> 소모품 </td></tr><tr><td> 폴리에틸렌의 Benztriazole 금지 </td><td> Sunbio </td><td> DE-034GS </td><td> 소모품 </td></tr><tr><td> 트리스 버퍼 타블렛 (산도 7.6) </td><td> 시그마 </td><td> T5030 </td><td> 소모품 </td></tr><tr><td> 원심 분리기 </td><td> Eppendorf </td><td> 5417R </td><td> 동등pment </td></tr><tr><td> 궤도 흔드는 </td><td> 뉴 브 런 즈윅 Scienctific </td><td> C24 </td><td> 장비 </td></tr><tr><td> 에어 5 % CO 2와 Humidified 인큐베이터 </td><td> 써모 과학 </td><td> 모델 370 </td><td> 장비 </td></tr><tr><td> 오버헤드 활동가 </td><td> 이카 </td><td> Visc6000 </td><td> 장비 </td></tr><tr><td> 마그네틱 활동가 </td><td> 코닝 </td><td> PC-210 </td><td> 장비 </td></tr><tr><td> 진공 건조기 </td><td> - </td><td> - </td><td> 장비 </td></tr><tr><td> 입자 크기 분석기 </td><td> Malvern </td><td> STP2000 Spraytec </td><td> 장비 </td></tr><tr><td> 열탕 목욕 </td><td> 피셔 과학 </td><td> Isotemp210 </td><td> 장비 </td></tr><tr><td> 분광 </td><td> Beckman </td><td> Beckman 보습 바로 앞에 달린 풀베는 날 DU 800UV/Visible 분광 </td><td> 장비 </td></tr><tr><td> 와동 </td><td> Diagger </td><td> 3030a </td><td> 장비 </td></tr><tr><td> Microplate Reader를 </td><td> 분자 장치 </td><td> SpectraMax M2 </td><td> 장비 </td></tr><tr><td> 형광 / 라이트 현미경 </td><td> 올림포스 산 </td><td> IX71 </td><td> 장비 </td></tr><tr><td> 공촛점 현미경 </td><td> 올림포스 산 </td><td> 공촛점 현미경 스캐닝 FV-500 레이저 </td><td> 장비 </td></tr><tr><td> 전자 현미경 검사 </td><td> 칼 자이스 혈구 MicroImaging </td><td> 레오 435 부사장 </td><td> 장비 </td></tr><tr><td> 전송 전자 현미경 </td><td> JEOL </td><td> JEOL 1230 </td><td> 장비 </td></tr></tbody></table>

engineering a bilayered hydrogel to control asc differentiation

년간 천연 고분자로 인해 자신의 호스트 biocompatibility 및 시험 관내 및 생체내의 세포와 상호 작용하는 능력의 중요성을 얻고있다. 재생 의료의 가능성을 가지고 연구의 영역이 소설 biomaterials 및 줄기 세포의 조합을 사용합니다. 조직 공학 분야의 기본적인 전략은 세포 기능을 감독을위한 입체 비계 (예 : 세포외 기질, hydrogels, 마이크로 / 나노 입자를 decellularized)의 사용이다. 이 기술은 세포, 그들은 고수 수있는시 기판이 필요 분아 따위에 의해 중식, 그들의 차별화된 세포 표현형 및 기능 2-3 표현하는 발견으로 변화시켰습니다. 최근에는, 그것은 또한 세포 부착에 대해 이러한 기판을 사용할뿐만 아니라 상호 작용 및 매트릭스 기판 (예 : 세포외 기질, ECM) 4에서 단서를뿐만 아니라 결정되었습니다. 따라서 세포 공사장 공중 발판은 상호 연결조직 개발, 조직, 그리고 궁극적인 기능을 제어하는​​ 역할을합니다. 지방 파생 줄기 세포 (ASCs)가 mesenchymal가 아닌 hematopoetic 줄기 세포 멀티 혈통 차별을 전시하고 세포 즉시 사용할 소스 (예 : 사전 혈관 endothelia 및 pericytes)으로 사용할 수있는 지방 조직에 존재한다. 우리의 가설은 지방 파생 줄기 세포가 bilayered 매트릭스 1에 간단히 공동 culturing 그들에 의해 동시에 phenotypes 서로 다른 방향으로 이동 수있다는 것입니다. 저희 실험실은 피부 상처 치유에 초점을 맞추었습니다. 이를 위해, 우리는 피부에 특정한 상처 치유 ECM 환경의 특성과 기능을 모방 수있는 하나의 복합 천연 biomaterials의 행렬, 섬유소, 콜라겐과 키토산을 만들었습니다.

Watch this Scientific Journal Video about Engineering a Bilayered Hydrogel to Control ASC Differentiation at JoVE.com

Engineering a Bilayered Hydrogel to Control ASC Differentiation

이 프로토콜은 자신의 주변의 세포외 기질에서 발표가 되려면 여러 phenotypes로 차별화에 시달릴 수도 줄기 세포의 고유 기능을 활용에 초점을 맞추고 있습니다. 이 방법 원고는 동시에 지방 파생 줄기 세포를 공동으로 차별화하는 데, PEG-섬유소와 콜라겐으로 구성되어 bilayered 히드로겔을 활용 모델, 우리의 설명 및 특성을 확장<sup&gt; 1</sup&gt;.

ASC의 분화를 제어하는​​ Bilayered 히드로겔 꾸민

Natural polymers over the years have gained more importance because of their host biocompatibility and ability to interact with cells in vitro and in ...

engineering-a-bilayered-hydrogel-to-control-asc-differentiation

Universidad de Cartagena UDEC

Research

JoVE Journal

Bioengineering

13.8K 조회수.  United States Army Institute of Surgical Research. 이 프로토콜은 자신의 주변의 세포외 기질에서 발표가 되려면 여러 phenotypes로 차별화에 시달릴 수도 줄기 세포의 고유 기능을 활용에 초점을 맞추고 있습니다. 이 방법 원고는 동시에 지방 파생 줄기 세포를 공동으로 차별화하는 데, PEG-섬유소와 콜라겐으로 구성되어 bilayered 히드로겔을 활용 모델, 우리의 설명 및 특성을 확장 1.

비디오: Engineering a Bilayered Hydrogel to Control ASC Differentiation

Procedure for Lung Engineering

Lung tissue, including lung cancer and chronic lung diseases such as chronic obstructive pulmonary disease, cumulatively account for some 280,000 deaths annually; chronic obstructive pulmonary disease is currently the fourth leading cause of death in the United States1. Contributing to this mortality is the fact that lungs do not generally repair or regenerate beyond the microscopic, cellular level. Therefore, lung tissue that is damaged by degeneration or infection, or lung tissue that is surgically resected is not functionally replaced in vivo. To explore whether lung tissue can be generated in vitro, we treated lungs from adult rats using a procedure that removes cellular components to produce an acellular lung extracellular matrix scaffold. This scaffold retains the hierarchical branching structures of airways and vasculature, as well as a largely intact basement membrane, which comprises collagen IV, laminin, and fibronectin. The scaffold is mounted in a bioreactor designed to mimic critical aspects of lung physiology, such as negative pressure ventilation and pulsatile vascular perfusion. By culturing pulmonary epithelium and vascular endothelium within the bioreactor-mounted scaffold, we are able to generate lung tissue that is phenotypically comparable to native lung tissue and that is able to participate in gas exchange for short time intervals (45-120 minutes). These results are encouraging, and suggest that repopulation of lung matrix is a viable strategy for lung regeneration. This possibility presents an opportunity not only to work toward increasing the supply of lung tissue for transplantation, but also to study respiratory cell and molecular biology in vitro for longer time periods and in a more accurate microenvironment than has previously been possible.

We have developed a decellularized lung extracellular matrix and novel biomimetic bioreactor that can be used to generate functional lung tissue. By seeding cells into the matrix and culturing in the bioreactor, we generate tissue that demonstrates effective gas exchange when transplanted in vivo for short periods of time.

룽 공학을위한 절차

Lung tissue, including lung cancer and chronic lung diseases such as chronic obstructive pulmonary disease, cumulatively account for some 280,000 deaths ...

연구

생체공학

Encapsulation of Cardiomyocytes in a Fibrin Hydrogel for Cardiac Tissue Engineering

Culturing cells in a three dimensional hydrogel environment is an important technique for developing constructs for tissue engineering as well as studying cellular responses under various culture conditions in vitro. The three dimensional environment more closely mimics what the cells observe in vivo due to the application of mechanical and chemical stimuli in all dimensions 1. Three-dimensional hydrogels can either be made from synthetic polymers such as PEG-DA 2 and PLGA 3 or a number of naturally occurring proteins such as collagen 4, hyaluronic acid 5 or fibrin 6,7. Hydrogels created from fibrin, a naturally occurring blood clotting protein, can polymerize to form a mesh that is part of the body's natural wound healing processes 8. Fibrin is cell-degradable and potentially autologous 9, making it an ideal temporary scaffold for tissue engineering.
Here we describe in detail the isolation of neonatal cardiomyocytes from three day old rat pups and the preparation of the cells for encapsulation in fibrin hydrogel constructs for tissue engineering. Neonatal myocytes are a common cell source used for in vitro studies in cardiac tissue formation and engineering 4. Fibrin gel is created by mixing fibrinogen with the enzyme thrombin. Thrombin cleaves fibrinopeptides FpA and FpB from fibrinogen, revealing binding sites that interact with other monomers 10. These interactions cause the monomers to self-assemble into fibers that form the hydrogel mesh. Because the timing of this enzymatic reaction can be adjusted by altering the ratio of thrombin to fibrinogen, or the ratio of calcium to thrombin, one can injection mold constructs with a number of different geometries 11,12. Further we can generate alignment of the resulting tissue by how we constrain the gel during culture 13.
After culturing the engineered cardiac tissue constructs for two weeks under static conditions, the cardiac cells have begun to remodel the construct and can generate a contraction force under electrical pacing conditions 6. As part of this protocol, we also describe methods for analyzing the tissue engineered myocardium after the culture period including functional analysis of the active force generated by the cardiac muscle construct upon electrical stimulation, as well as methods for determining final cell viability (Live-Dead assay) and immunohistological staining to examine the expression and morphology of typical proteins important for contraction (Myosin Heavy Chain or MHC) and cellular coupling (Connexin 43 or Cx43) between myocytes.

We describe the isolation of neonatal cardiomyocytes and the preparation of the cells for encapsulation in fibrin hydrogel constructs for tissue engineering. We describe methods for analyzing the tissue engineered myocardium after the culture period including active force generated upon electrical stimulation and cell viability and immunohistological staining.

심장 조직 공학을위한 섬유소 히드로겔에 Cardiomyocytes의 캡슐

Culturing cells in a three dimensional hydrogel environment is an important technique for developing constructs for tissue engineering as well as studying ...

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic valve leaflets are composed of interstitial cells suspended within an extracellular matrix (ECM) and are lined with an endothelial cell monolayer. The valve withstands a harsh, dynamic environment and is constantly exposed to shear, flexion, tension, and compression. Research has shown calcific lesions in diseased valves occur in areas of high mechanical stress as a result of endothelial disruption or interstitial matrix damage1-3. Hence, it is not surprising that epidemiological studies have shown high blood pressure to be a leading risk factor in the onset of aortic valve disease4. 
The only treatment option currently available for valve disease is surgical replacement of the diseased valve with a bioprosthetic or mechanical valve5. Improved understanding of valve biology in response to physical stresses would help elucidate the mechanisms of valve pathogenesis. In turn, this could help in the development of non-invasive therapies such as pharmaceutical intervention or prevention. Several bioreactors have been previously developed to study the mechanobiology of native or engineered heart valves6-9. Pulsatile bioreactors have also been developed to study a range of tissues including cartilage10, bone11 and bladder12. The aim of this work was to develop a cyclic pressure system that could be used to elucidate the biological response of aortic valve leaflets to increased pressure loads. 
The system consisted of an acrylic chamber in which to place samples and produce cyclic pressure, viton diaphragm solenoid valves to control the timing of the pressure cycle, and a computer to control electrical devices. The pressure was monitored using a pressure transducer, and the signal was conditioned using a load cell conditioner. A LabVIEW program regulated the pressure using an analog device to pump compressed air into the system at the appropriate rate. The system mimicked the dynamic transvalvular pressure levels associated with the aortic valve; a saw tooth wave produced a gradual increase in pressure, typical of the transvalvular pressure gradient that is present across the valve during diastole, followed by a sharp pressure drop depicting valve opening in systole. The LabVIEW program allowed users to control the magnitude and frequency of cyclic pressure. The system was able to subject tissue samples to physiological and pathological pressure conditions. This device can be used to increase our understanding of how heart valves respond to changes in the local mechanical environment.

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

A cyclic pressure bioreactor capable of subjecting heart valve tissue to physiological and pathological pressure conditions has been designed. A LabVIEW program allows users to control pressure magnitude, amplitude and frequency. This device can be used to study the mechanobiology of heart valve tissue or isolated cells.

의 순환 압력 생물 반응기 설계 예 VIVO</em대동맥 심장 밸브> 학습

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic ...

A Toolkit to Enable Hydrocarbon Conversion in Aqueous Environments

This work puts forward a toolkit that enables the conversion of alkanes by Escherichia coli and presents a proof of principle of its applicability. The toolkit consists of multiple standard interchangeable parts (BioBricks)9 addressing the conversion of alkanes, regulation of gene expression and survival in toxic hydrocarbon-rich environments.
A three-step pathway for alkane degradation was implemented in E. coli to enable the conversion of medium- and long-chain alkanes to their respective alkanols, alkanals and ultimately alkanoic-acids. The latter were metabolized via the native &beta;-oxidation pathway. To facilitate the oxidation of medium-chain alkanes (C5-C13) and cycloalkanes (C5-C8), four genes (alkB2, rubA3, rubA4and rubB) of the alkane hydroxylase system from Gordonia sp. TF68,21 were transformed into E. coli. For the conversion of long-chain alkanes (C15-C36), theladA gene from Geobacillus thermodenitrificans was implemented. For the required further steps of the degradation process, ADH and ALDH (originating from G. thermodenitrificans) were introduced10,11. The activity was measured by resting cell assays. For each oxidative step, enzyme activity was observed.
To optimize the process efficiency, the expression was only induced under low glucose conditions: a substrate-regulated promoter, pCaiF, was used. pCaiF is present in E. coli K12 and regulates the expression of the genes involved in the degradation of non-glucose carbon sources.
The last part of the toolkit - targeting survival - was implemented using solvent tolerance genes, PhPFD&alpha; and &beta;, both from Pyrococcus horikoshii OT3. Organic solvents can induce cell stress and decreased survivability by negatively affecting protein folding. As chaperones, PhPFD&alpha; and &beta; improve the protein folding process e.g. under the presence of alkanes. The expression of these genes led to an improved hydrocarbon tolerance shown by an increased growth rate (up to 50%) in the presences of 10% n-hexane in the culture medium were observed.
Summarizing, the results indicate that the toolkit enables E. coli to convert and tolerate hydrocarbons in aqueous environments. As such, it represents an initial step towards a sustainable solution for oil-remediation using a synthetic biology approach.

A sustainable auto regulating bacterial system for the remediation of oil pollutions was designed using standard interchangeable DNA parts (BioBricks). An engineered E. coli strain was used to degrade alkanes via &beta;-oxidation in toxic aqueous environments. The respective enzymes from different species showed alkane degradation activity. Additionally, an increased tolerance to n-hexane was achieved by introducing genes from alkane-tolerant bacteria.

수성 환경에서 탄화수소 전환을 사용하는 툴킷

This work puts forward a toolkit that enables the conversion of alkanes by Escherichia coli and presents a proof of principle of its applicability. The ...

Synthesis of an Intein-mediated Artificial Protein Hydrogel

We present the synthesis of a highly stable protein hydrogel mediated by a split-intein-catalyzed protein trans-splicing reaction. The building blocks of this hydrogel are two protein block-copolymers each containing a subunit of a trimeric protein that serves as a crosslinker and one half of a split intein. A highly hydrophilic random coil is inserted into one of the block-copolymers for water retention. Mixing of the two protein block copolymers triggers an intein trans-splicing reaction, yielding a polypeptide unit with crosslinkers at either end that rapidly self-assembles into a hydrogel. This hydrogel is very stable under both acidic and basic conditions, at temperatures up to 50 &#176;C, and in organic solvents. The hydrogel rapidly reforms after shear-induced rupture. Incorporation of a &#34;docking station peptide&#34; into the hydrogel building block enables convenient incorporation of &#34;docking protein&#34;-tagged target proteins. The hydrogel is compatible with tissue culture growth media, supports the diffusion of 20 kDa molecules, and enables the immobilization of bioactive globular proteins. The application of the intein-mediated protein hydrogel as an organic-solvent-compatible biocatalyst was demonstrated by encapsulating the horseradish peroxidase enzyme and corroborating its activity.

We present the synthesis of a split-intein-mediated protein hydrogel. The building blocks of this hydrogel are two protein copolymers each containing a subunit of a trimeric protein that serves as a crosslinker and one half of a split intein. Mixing of the two protein copolymers triggers an intein trans-splicing reaction, yielding a polypeptide unit that self-assembles into a hydrogel. This hydrogel is highly pH- and temperature-stable, compatible with organic solvents, and easily incorporates functional globular proteins.

테인 매개 인공 단백질 히드로 겔의 합성

We present the synthesis of a highly stable protein hydrogel mediated by a split-intein-catalyzed protein trans-splicing reaction. The building blocks of ...

Tissue Engineering of Tumor Stromal Microenvironment with Application to Cancer Cell Invasion

3D organotypic cultures of epithelial cells on a matrix embedded with mesenchymal cells are widely used to study epithelial cell differentiation and invasion. Rat tail type I collagen and/or matrix derived from Engelbreth-Holm-Swarm mouse sarcoma cells have been traditionally employed as the substrates to model the matrix or stromal microenvironment into which mesenchymal cells (usually fibroblasts) are populated. Although experiments using such matrices are very informative, it can be argued that due to an overriding presence of a single protein (such as in type I Collagen) or a high content of basement membrane components and growth factors (such as in matrix derived from mouse sarcoma cells), these substrates do not best reflect the contribution to matrix composition made by the stromal cells themselves. To study native matrices produced by primary dermal fibroblasts isolated from patients with a tumor prone, genetic blistering disorder (recessive dystrophic epidermolysis bullosa), we have adapted an existing native matrix protocol to study tumor cell invasion. Fibroblasts are induced to produce their own matrix over a prolonged period in culture. This native matrix is then detached from the culture dish and epithelial cells are seeded onto it before the entire coculture is raised to the air-liquid interface. Cellular differentiation and/or invasion can then be assessed over time. This technique provides the ability to assess epithelial-mesenchymal cell interactions in a 3D setting without the need for a synthetic or foreign matrix with the only disadvantage being the prolonged period of time required to produce the native matrix. Here we describe the application of this technique to assess the ability of a single molecule expressed by fibroblasts, type VII collagen, to inhibit tumor cell invasion.

Tissue engineered fibroblast-derived native matrix is an emerging tool to generate a stromal substrate which supports epithelial cell proliferation and differentiation. Here a protocol applying this methodology to assess the impact of different stromal cell types on tumor cell biology is presented.

암 세포의 침략에 응용 프로그램을 사용하여 종양의 기질 미시의 조직 공학

3D organotypic cultures of epithelial cells on a matrix embedded with mesenchymal cells are widely used to study epithelial cell differentiation and ...

An Injectable and Drug-loaded Supramolecular Hydrogel for Local Catheter Injection into the Pig Heart

Regeneration of lost myocardium is an important goal for future therapies because of the increasing occurrence of chronic ischemic heart failure and the limited access to donor hearts. An example of a treatment to recover the function of the heart consists of the local delivery of drugs and bioactives from a hydrogel. In this paper a method is introduced to formulate and inject a drug-loaded hydrogel non-invasively and side-specific into the pig heart using a long, flexible catheter. The use of 3-D electromechanical mapping and injection via a catheter allows side-specific treatment of the myocardium. To provide a hydrogel compatible with this catheter, a supramolecular hydrogel is used because of the convenient switching from a gel to a solution state using environmental triggers. At basic pH this ureido-pyrimidinone modified poly(ethylene glycol) acts as a Newtonian fluid which can be easily injected, but at physiological pH the solution rapidly switches into a gel. These mild switching conditions allow for the incorporation of bioactive drugs and bioactive species, such as growth factors and exosomes as we present here in both in vitro and in vivo experiments. The in vitro experiments give an on forehand indication of the gel stability and drug release, which allows for tuning of the gel and release properties before the subsequent application in vivo. This combination allows for the optimal tuning of the gel to the used bioactive compounds and species, and the injection system.

Supramolecular hydrogelators based on ureido-pyrimidinones allow full control over the macroscopic gel properties and the sol&#8211;gel switching behavior using pH. Here, we present a protocol for formulating and injecting such a supramolecular hydrogelator via a catheter delivery system for local delivery directly in relevant areas in the pig heart.

돼지 심장에 현지 카테터 주입 용 주사 및 약물로드 초분자 히드로 겔

Regeneration of lost myocardium is an important goal for future therapies because of the increasing occurrence of chronic ischemic heart failure and the ...

Tissue Engineering by Intrinsic Vascularization in an In Vivo Tissue Engineering Chamber

In reconstructive surgery, there is a clinical need for an alternative to the current methods of autologous reconstruction which are complex, costly and trade one defect for another. Tissue engineering holds the promise to address this increasing demand. However, most tissue engineering strategies fail to generate stable and functional tissue substitutes because of poor vascularization. This paper focuses on an in vivo tissue engineering chamber model of intrinsic vascularization where a perfused artery and a vein either as an arteriovenous loop or a flow-through pedicle configuration is directed inside a protected hollow chamber. In this chamber-based system angiogenic sprouting occurs from the arteriovenous vessels and this system attracts ischemic and inflammatory driven endogenous cell migration which gradually fills the chamber space with fibro-vascular tissue. Exogenous cell/matrix implantation at the time of chamber construction enhances cell survival and determines specificity of the engineered tissues which develop. Our studies have shown that this chamber model can successfully generate different tissues such as fat, cardiac muscle, liver and others. However, modifications and refinements are required to ensure target tissue formation is consistent and reproducible. This article describes a standardized protocol for the fabrication of two different vascularized tissue engineering chamber models in vivo.

Tissue Engineering by Intrinsic Vascularization in an In Vivo Tissue Engineering Chamber

This is a guideline for constructing in vivo vascularized tissue using a microsurgical arteriovenous loop or a flow-through pedicle configuration inside a tissue engineering chamber. The vascularized tissues generated can be employed for organ regeneration and replacement of tissue defects, as well as for drug testing and disease modeling.

에 내장 혈관 신생에 의하여 조직 공학<em&gt; 생체</em&gt; 조직 공학 상공 회의소

In reconstructive surgery, there is a clinical need for an alternative to the current methods of autologous reconstruction which are complex, costly and ...

Dendrimer-based Uneven Nanopatterns to Locally Control Surface Adhesiveness: A Method to Direct Chondrogenic Differentiation

Cellular adhesion and differentiation is conditioned by the nanoscale disposition of the extracellular matrix (ECM) components, with local concentrations having a major effect. Here we present a method to obtain large-scale uneven nanopatterns of arginine-glycine-aspartic acid (RGD)-functionalized dendrimers that permit the nanoscale control of local RGD surface density. Nanopatterns are formed by surface adsorption of dendrimers from solutions at different initial concentrations and are characterized by water contact angle (CA), X-ray photoelectron spectroscopy (XPS), and scanning probe microscopy techniques such as scanning tunneling microscopy (STM) and atomic force microscopy (AFM). The local surface density of RGD is measured using AFM images by means of probability contour maps of minimum interparticle distances and then correlated with cell adhesion response and differentiation. The nanopatterning method presented here is a simple procedure that can be scaled up in a straightforward manner to large surface areas. It is thus fully compatible with cell culture protocols and can be applied to other ligands that exert concentration-dependent effects on cells.

A method to obtain dendrimer-based uneven nanopatterns that permit the nanoscale control of local arginine-glycine-aspartic acid (RGD) surface density is described and applied for the study of cell adhesion and chondrogenic differentiation.

로컬 컨트롤 표면 점착을 고르지 Nanopatterns Dendrimer 기반: Chondrogenic 차별화 하는 방법

Cellular adhesion and differentiation is conditioned by the nanoscale disposition of the extracellular matrix (ECM) components, with local concentrations ...

Gel-seq: A Method for Simultaneous Sequencing Library Preparation of DNA and RNA Using Hydrogel Matrices

The ability to amplify and sequence either DNA or RNA from small starting samples has only been achieved in the last five years. Unfortunately, the standard protocols for generating genomic or transcriptomic libraries are incompatible and researchers must choose whether to sequence DNA or RNA for a particular sample. Gel-seq solves this problem by enabling researchers to simultaneously prepare libraries for both DNA and RNA starting with 100 - 1000 cells using a simple hydrogel device. This paper presents a detailed approach for the fabrication of the device as well as the biological protocol to generate paired libraries. We designed Gel-seq so that it could be easily implemented by other researchers; many genetics labs already have the necessary equipment to reproduce the Gel-seq device fabrication. Our protocol employs commonly-used kits for both whole-transcript amplification (WTA) and library preparation, which are also likely to be familiar to researchers already versed in generating genomic and transcriptomic libraries. Our approach allows researchers to bring to bear the power of both DNA and RNA sequencing on a single sample without splitting and with negligible added cost.

Gel-seq enables researchers to simultaneously prepare libraries for both DNA- and RNA-seq at negligible added cost starting from 100 - 1000 cells using a simple hydrogel device. This paper presents a detailed approach for the fabrication of the device as well as the biological protocol to generate paired libraries.

젤-seq: DNA와 RNA 히드로 매트릭스를 사용 하 여 동시 시퀀싱 라이브러리 준비를 위한 방법

The ability to amplify and sequence either DNA or RNA from small starting samples has only been achieved in the last five years. Unfortunately, the ...

ASC의 분화를 제어하는 Bilayered 히드로겔 꾸민

요약

더 많은 비디오 탐색

이 비디오의 챕터

룽 공학을위한 절차

심장 조직 공학을위한 섬유소 히드로겔에 Cardiomyocytes의 캡슐

의 순환 압력 생물 반응기 설계 예 VIVO 학습

수성 환경에서 탄화수소 전환을 사용하는 툴킷

테인 매개 인공 단백질 히드로 겔의 합성

암 세포의 침략에 응용 프로그램을 사용하여 종양의 기질 미시의 조직 공학

돼지 심장에 현지 카테터 주입 용 주사 및 약물로드 초분자 히드로 겔

에 내장 혈관 신생에 의하여 조직 공학

로컬 컨트롤 표면 점착을 고르지 Nanopatterns Dendrimer 기반: Chondrogenic 차별화 하는 방법

젤-seq: DNA와 RNA 히드로 매트릭스를 사용 하 여 동시 시퀀싱 라이브러리 준비를 위한 방법

ASC의 분화를 제어하는​​ Bilayered 히드로겔 꾸민

요약

더 많은 비디오 탐색

이 비디오의 챕터

룽 공학을위한 절차

심장 조직 공학을위한 섬유소 히드로겔에 Cardiomyocytes의 캡슐

의 순환 압력 생물 반응기 설계 예 VIVO 학습

수성 환경에서 탄화수소 전환을 사용하는 툴킷

테인 매개 인공 단백질 히드로 겔의 합성

암 세포의 침략에 응용 프로그램을 사용하여 종양의 기질 미시의 조직 공학

돼지 심장에 현지 카테터 주입 용 주사 및 약물로드 초분자 히드로 겔

에 내장 혈관 신생에 의하여 조직 공학

로컬 컨트롤 표면 점착을 고르지 Nanopatterns Dendrimer 기반: Chondrogenic 차별화 하는 방법

젤-seq: DNA와 RNA 히드로 매트릭스를 사용 하 여 동시 시퀀싱 라이브러리 준비를 위한 방법

ASC의 분화를 제어하는 Bilayered 히드로겔 꾸민