박사 Bermudez 실험실에서 작업이 Conacyt (부여 # 82622)에 의해 재정 지원되었다. 우리는 가브리엘라 구티에레즈 - 소사, Eliuth 레예스 - 마르티네스와 electroleution 절차를 녹화 비디오 Ximena로드 리게스 - 토레스. 감사합니다

<ol><li> 정화가에 관심이 DNA 조각을 선택하기 위해서는 이러한 아가로 오스에서 해결되어야 또는 아크릴 아미드의 젤은 1 시간 동안 120 볼트에서 0.5X TBE 버퍼 (트리스 borate, EDTA (에틸렌 다이아 민 테트라 초산))를 사용 전기 영동하여 ethidium의 브로마이드 물들일 젤. 이를 위해, 플라스미드 pProEx - GdMre11S의 ~ 700 NG (6000 - BP)은 이전에 NdeI와 HindIII와 소화는 900 - BP 조각 (조각의 플라스미드와 84 NG의 560 NG)를 출시하는 데 사용되었다. </li><li> electroeluter 탱크 (그림 1)은 중간 고원에 흘리면 안되 돌보는 마찬가지로 중간 고원의 양쪽에서 배포 0.5X TBE 가득해야합니다. </li><li> 선택한 밴드 (또는 밴드)은 젤 도려낸, 그리고 가까이 가능한 V 채널 (물론 당 슬라이스)로 같은 샘플 챔버에 배치됩니다. 실행 버퍼는 각 챔버에 추가되어야하며 겔 슬라이스를 충당하기 위해 충분. </li><li> 사용하는 각 V 채널은 함정에 기포를 제거하기 위해 파스퇴르 피펫로 플러시해야합니다. </li><li> 다음 10 M NH 4 아세테이트 100 UL은 (bromophenol 파란색의 작은 금액이 충분히 그것을 컬러로, 추가 시각화를 촉진하기) 가볍게 V 채널 내부에 추가됩니다. </li><li> 높은 소금 쿠션의 resuspension을 방지하기 위해 뚜껑이 부드럽게 폐쇄해야합니다. </li><li> Electroelution은 25 분 동안 100 볼트에서 시작됩니다. </li><li> electrolution가 완료되면, 400 UL은 V 채널에서 삭제, 1 시간 또는 숙박에 대해 4 추위 에탄올과 글리코겐 (DNA 복구를 개선하기 위해 권장) 2 권 ° C로 시켰던 수 microfuge 튜브에 배치됩니다. </li><li> 20 분 동안 원심 분리기, 뜨는 제거하고 70 % 에탄올로 씻는다. </li><li> 드라이 튜브와 OD 260 nm의에서 DNA를 계량. </li><li> 얻은 복구 75 % (84가 NG가 V 채널에 배치했을 때 63 NG가 회복)되었습니다. </li></ol><img src="/files/ftp_upload/2136/2136fig1.jpg" alt="그림 1" /> 그림 1. Electroeluter 다이어그램. 음극은 슬라이스 겔에 포함된 탱크, DNA의 각 측면에 표시됩니다 (검은색 사각형으로 그림)는 부정적인 요금으로 인해 음극으로 마이 그 레이션됩니다 Anod. 그렇다면 그것은 V 채널에있는 소금 쿠션 (거꾸로 검정색 삼각형로 표시됨)에 갇혀있는 것입니다.

<ol>
	<li>Sambrook, J., Fritsch, E. F., Maniatis, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Molecular Cloning: A Laboratory Manual. , (1989).</li></ol>

관심 없음 충돌 선언하지 않습니다.

실행의 기간은 최대 조각 일반적으로, 조각의 크기에 매우 달려 작은 조각을 위해 10 분마다 모니터링 자외선이 통과하기 위해 조각을 방지하기 위해 필요한 동안 1 시간 20킬로바이트 50 분, 충분 소금 쿠션과 결과적으로 복구를 감소 anodal 버퍼 챔버 있습니다. 당신은 100 볼트에서 전원 공급 장치를 설정할 때, 현재 적어도 10 mAmp있다는 것을 확인하는 것이 중요합니다. DNA 밴드는 UV - 손 램프를 사용하여 모니터링이가 젤 조각을 버리지 감지 수 있습니다. 쿠션 소금도 3 M 나 아세테이트로 만들 수 있습니다. 이 절차는 좋은 회복 (~ 80 %)과 다양한 크기의 DNA 또는 RNA 조각의 정화가 수정 효소 등 처리 제한 효소에 의해 소화, radiolabeled 수 있습니다

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>NdeI</td>
<td>&nbsp;</td>
<td>New England Biolabs</td>
<td>R0111L</td>
<td>&nbsp;</td>
<tr>
<td>HindIII</td>
<td>&nbsp;</td>
<td>New England Biolabs</td>
<td>R0104L</td>
<td>&nbsp;</td>
<tr>
<td>NH4 acetate</td>
<td>&nbsp;</td>
<td>JTBaker</td>
<td>0596</td>
<td>&nbsp;</td>
<tr>
<td>agarose</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>15510-027</td>
<td>&nbsp;</td>
<tr>
<td>Biophotometer</td>
<td>&nbsp;</td>
<td>Eppendorf</td>
<td>6131 000 020</td>
<td>&nbsp;</td>
<tr>
<td>Electroeluter</td>
<td>&nbsp;</td>
<td>IBI</td>
<td>UEA CAT 46000</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

electroeluting dna fragments

정화 DNA 조각은 분자 생물학에서 다양한 용도로 사용되며 그들은 몇 가지 절차로 준비하실 수 있습니다. 그들의 대부분은 관심의 밴드를 분리하기 위해 DNA 조각의 이전 전기를 필요로합니다. 그런 다음,이 밴드는 아가로 오스 또는 아크릴 아미드 겔에서 밖으로 excised 및 사용하여 정화 중입니다 유리 또는 실리카 입자, DEAE - 셀룰로오스의 점막에서 바인딩과 용출은 &quot;방법을 호감과 흡수&quot;electroelution 또는 매우 자주 비싼 상업 정화 키트. 따라서, 방법을 선택하면 실험실에서 사용할 수있는 무엇을 주로 따라 달라집니다. electroelution 절차는 한 응용 프로그램의 많은 (시퀀싱, radiolabeling, 효소 제한, 효소 수정, 복제 등)에 사용되는 매우 깨끗한 DNA를 정화 수 있습니다. 이 절차는 배치에 구성되어 DNA 밴드가 포함된 다음 적용 전류 electroeluter의 샘플 우물로 아가로 오스 또는 아크릴 아미드 조각하면 DNA 조각은 아가로 오스을 떠날 수 있도록하고 있으므로 에탄올 침전에 의해 나중에 복구하는 쿠션 소금에 갇혀 수 있습니다.

Watch this Scientific Journal Video about Electroeluting DNA Fragments at JoVE.com

Electroeluting DNA Fragments

이 절차는 높은 수율로의 DNA 조각의 정화 수 있습니다.

DNA 조각을 Electroeluting

Purified DNA fragments are used for different purposes in Molecular Biology and they can be prepared by several procedures. Most of them require a ...

Universidad de Cartagena UDEC

Research

JoVE Journal

Biology

27.7K 조회수.  Research and Advanced Studies Center of National Polytechnic Institute. 이 절차는 높은 수율로의 DNA 조각의 정화 수 있습니다.

비디오: Electroeluting DNA Fragments

Methylated DNA Immunoprecipitation

The identification of DNA methylation patterns is a common procedure in the study of epigenetics, as methylation is known to have significant effects on gene expression, and is involved with normal development as well as disease 1-4. Thus, the ability to discriminate between methylated DNA and non-methylated DNA is essential for generating methylation profiles for such studies. Methylated DNA immunoprecipitation (MeDIP) is an efficient technique for the extraction of methylated DNA from a sample of interest 5-7. A sample of as little as 200 ng of DNA is sufficient for the antibody, or immunoprecipitation (IP), reaction. DNA is sonicated into fragments ranging in size from 300-1000 bp, and is divided into immunoprecipitated (IP) and input (IN) portions. IP DNA is subsequently heat denatured and then incubated with anti-5'mC, allowing the monoclonal antibody to bind methylated DNA. After this, magnetic beads containing a secondary antibody with affinity for the primary antibody are added, and incubated. These bead-linked antibodies will bind the monoclonal antibody used in the first step. DNA bound to the antibody complex (methylated DNA) is separated from the rest of the DNA by using a magnet to pull the complexes out of solution. Several washes using IP buffer are then performed to remove the unbound, non-methylated DNA. The methylated DNA/antibody complexes are then digested with Proteinase K to digest the antibodies leaving only the methylated DNA intact. The enriched DNA is purified by phenol:chloroform extraction to remove the protein matter and then precipitated and resuspended in water for later use. PCR techniques can be used to validate the efficiency of the MeDIP procedure by analyzing the amplification products of IP and IN DNA for regions known to lack and known to contain methylated sequences. The purified methylated DNA can then be used for locus-specific (PCR) or genome-wide (microarray and sequencing) methylation studies, and is particularly useful when applied in conjunction with other research tools such as gene expression profiling and array comparative genome hybridization (CGH) 8. Further investigation into DNA methylation will lead to the discovery of new epigenetic targets, which in turn, may be useful in developing new therapeutic or prognostic research tools for diseases such as cancer that are characterized by aberrantly methylated DNA 2, 4, 9-11.

This video demonstrates the protocol for methylated DNA immunoprecipitation (MeDIP). MeDIP is a two day procedure that selectively extracts methylated DNA fragments from a genomic DNA sample using antibodies with specificity for 5 -methylcytosine (anti-5 mC).

Methylated DNA의 Immunoprecipitation

The identification of DNA methylation patterns is a common procedure in the study of epigenetics, as methylation is known to have significant effects on ...

연구

생물학

Direct Observation of Enzymes Replicating DNA Using a Single-molecule DNA Stretching Assay

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system. Linearized &lambda; DNA is modified to have a biotin on the end of one strand, and a digoxigenin moiety on the other end of the same strand. The biotinylated end is attached to a functionalized glass coverslip and the digoxigeninated end to a small bead. The assembly of these DNA-bead tethers on the surface of a flow cell allows a laminar flow to be applied to exert a drag force on the bead. As a result, the DNA is stretched close to and parallel to the surface of the coverslip at a force that is determined by the flow rate (Figure 1). The length of the DNA is measured by monitoring the position of the bead. Length differences between single- and double-stranded DNA are utilized to obtain real-time information on the activity of the replication proteins at the fork. Measuring the position of the bead allows precise determination of the rates and processivities of DNA unwinding and polymerization (Figure 2).

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system.

효소 복제 DNA의 직접 관찰 어세을 스트레칭 단일 분자 DNA를 사용하여

We describe a method for observing real time replication of individual DNA molecules mediated by proteins of the bacteriophage replication system. ...

DNA Stable-Isotope Probing (DNA-SIP)

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and nutrients into cellular biomass. As such, this cultivation-independent technique has been an important methodology for assigning metabolic function to the diverse communities inhabiting a wide range of terrestrial and aquatic environments. Following the incubation of an environmental sample with stable-isotope labelled compounds, extracted nucleic acid is subjected to density gradient ultracentrifugation and subsequent gradient fractionation to separate nucleic acids of differing densities. Purification of DNA from cesium chloride retrieves labelled and unlabelled DNA for subsequent molecular characterization (e.g. fingerprinting, microarrays, clone libraries, metagenomics). This JoVE video protocol provides visual step-by-step explanations of the protocol for density gradient ultracentrifugation, gradient fractionation and recovery of labelled DNA. The protocol also includes sample SIP data and highlights important tips and cautions that must be considered to ensure a successful DNA-SIP analysis.

DNA Stable-Isotope Probing DNA-SIP

DNA stable-isotope probing is a cultivation-independent method to identify and characterize active communities of microorganisms that are capable of utilizing specific substrates. Assimilation of substrate enriched in heavy isotope leads to incorporation of labelled atoms into microbial biomass. Density gradient ultracentrifugation retrieves labelled DNA for downstream molecular analyses.

DNA 안정 - 동위 원소 (DNA - SIP) 탐색

DNA stable-isotope probing (DNA-SIP) is a powerful technique for identifying active microorganisms that assimilate particular carbon substrates and ...

Generation of RNA/DNA Hybrids in Genomic DNA by Transformation using RNA-containing Oligonucleotides

Synthetic short nucleic acid polymers, oligonucleotides (oligos), are the most functional and widespread tools of molecular biology. Oligos can be produced to contain any desired DNA or RNA sequence and can be prepared to include a wide variety of base and sugar modifications. Moreover, oligos can be designed to mimic specific nucleic acid alterations and thus, can serve as important tools to investigate effects of DNA damage and mechanisms of repair. We found that Thermo Scientific Dharmacon RNA-containing oligos with a length between 50 and 80 nucleotides can be particularly suitable to study, in vivo, functions and consequences of chromosomal RNA/DNA hybrids and of ribonucleotides embedded into DNA. RNA/DNA hybrids can readily form during DNA replication, repair and transcription, however, very little is known about the stability of RNA/DNA hybrids in cells and to which extent these hybrids can affect the genetic integrity of cells. RNA-containing oligos, therefore, represent a perfect vector to introduce ribonucleotides into chromosomal DNA and generate RNA/DNA hybrids of chosen length and base composition. Here we present the protocol for the incorporation of ribonucleotides into the genome of the eukaryotic model system yeast /Saccharomyces cerevisiae/. Yet, our lab has utilized Thermo Scientific Dharmacon RNA-containing oligos to generate RNA/DNA hybrids at the chromosomal level in different cell systems, from bacteria to human cells.

This work shows how to form an RNA/DNA hybrid at the chromosomal level and reveal transfer of genetic information from RNA to genomic DNA in yeast cells.

RNA 함유 Oligonucleotides를 사용하여 변환하여 게놈 DNA에서 RNA / DNA 하이브리드의 생성

Synthetic short nucleic acid polymers, oligonucleotides (oligos), are the most functional and widespread tools of molecular biology. Oligos can be ...

Visualization of DNA Replication in the Vertebrate Model System DT40 using the DNA Fiber Technique

Maintenance of replication fork stability is of utmost importance for dividing cells to preserve viability and prevent disease. The processes involved not only ensure faithful genome duplication in the face of endogenous and exogenous DNA damage but also prevent genomic instability, a recognized causative factor in tumor development.
Here, we describe a simple and cost-effective fluorescence microscopy-based method to visualize DNA replication in the avian B-cell line DT40. This cell line provides a powerful tool to investigate protein function in vivo by reverse genetics in vertebrate cells1. DNA fiber fluorography in DT40 cells lacking a specific gene allows one to elucidate the function of this gene product in DNA replication and genome stability. Traditional methods to analyze replication fork dynamics in vertebrate cells rely on measuring the overall rate of DNA synthesis in a population of pulse-labeled cells. This is a quantitative approach and does not allow for qualitative analysis of parameters that influence DNA synthesis. In contrast, the rate of movement of active forks can be followed directly when using the DNA fiber technique2-4. In this approach, nascent DNA is labeled in vivo by incorporation of halogenated nucleotides (Fig 1A). Subsequently, individual fibers are stretched onto a microscope slide, and the labeled DNA replication tracts are stained with specific antibodies and visualized by fluorescence microscopy (Fig 1B). Initiation of replication as well as fork directionality is determined by the consecutive use of two differently modified analogues. Furthermore, the dual-labeling approach allows for quantitative analysis of parameters that influence DNA synthesis during the S-phase, i.e. replication structures such as ongoing and stalled forks, replication origin density as well as fork terminations. Finally, the experimental procedure can be accomplished within a day, and requires only general laboratory equipment and a fluorescence microscope.

DT40, a model vertebrate genetic system, provides a powerful tool to analyze protein function. Here we describe a simple method that allows qualitative analysis of parameters that influence DNA synthesis during the S-phase in DT40 cells at the single molecule level.

DNA 복제의 시각화는 척추 모델 시스템 DT40의 DNA 섬유 기술을 사용하여

Maintenance of replication fork stability is of utmost importance for dividing cells to preserve viability and prevent disease. The processes involved not ...

Agarose Gel Electrophoresis for the Separation of DNA Fragments

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb1. Agarose is isolated from the seaweed genera Gelidium and Gracilaria, and consists of repeated agarobiose (L- and D-galactose) subunits2. During gelation, agarose polymers associate non-covalently and form a network of bundles whose pore sizes determine a gel&#39;s molecular sieving properties. The use of agarose gel electrophoresis revolutionized the separation of DNA. Prior to the adoption of agarose gels, DNA was primarily separated using sucrose density gradient centrifugation, which only provided an approximation of size. To separate DNA using agarose gel electrophoresis, the DNA is loaded into pre-cast wells in the gel and a current applied. The phosphate backbone of the DNA (and RNA) molecule is negatively charged, therefore when placed in an electric field, DNA fragments will migrate to the positively charged anode. Because DNA has a uniform mass/charge ratio, DNA molecules are separated by size within an agarose gel in a pattern such that the distance traveled is inversely proportional to the log of its molecular weight3. The leading model for DNA movement through an agarose gel is &#34;biased reptation&#34;, whereby the leading edge moves forward and pulls the rest of the molecule along4. The rate of migration of a DNA molecule through a gel is determined by the following: 1) size of DNA molecule; 2) agarose concentration; 3) DNA conformation5; 4) voltage applied, 5) presence of ethidium bromide, 6) type of agarose and 7) electrophoresis buffer. After separation, the DNA molecules can be visualized under uv light after staining with an appropriate dye. By following this protocol, students should be able to: 
 
1. Understand the mechanism by which DNA fragments are separated within a gel matrix 
2. Understand how conformation of the DNA molecule will determine its mobility through a gel matrix 
3. Identify an agarose solution of appropriate concentration for their needs 
4. Prepare an agarose gel for electrophoresis of DNA samples 
5. Set up the gel electrophoresis apparatus and power supply 
6. Select an appropriate voltage for the separation of DNA fragments 
7. Understand the mechanism by which ethidium bromide allows for the visualization of DNA bands 
8. Determine the sizes of separated DNA fragments 
&#160;

A basic protocol for the separation of DNA fragments using agarose gel electrophoresis is described.

의 DNA 조각의 분리를위한 아가로 오스 젤 전기 영동

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb1. Agarose is isolated from ...

Iterative Optimization of DNA Duplexes for Crystallization of SeqA-DNA Complexes

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters within the origin of replication1. Beyond the origin, SeqA is found at the replication forks, where it organizes newly replicated DNA into higher ordered structures2. SeqA associates only weakly with single GATC sequences, but it forms high affinity complexes with DNA duplexes containing multiple GATC sites. The minimal functional and structural unit of SeqA is a dimer, thereby explaining the requirement of at least two GATC sequences to form a high-affinity complex with hemimethylated DNA3. Additionally, the SeqA architecture, with the oligomerization and DNA-binding domains separated by a flexible linker, allows binding to GATC repeats separated by up to three helical turns. Therefore, understanding the function of SeqA at a molecular level requires the structural analysis of SeqA bound to multiple GATC sequences. In protein-DNA crystallization, DNA can have none to an exceptional effect on the packing interactions depending on the relative sizes and architecture of the protein and the DNA. If the protein is larger than the DNA or footprints most of the DNA, the crystal packing is primarily mediated by protein-protein interactions. Conversely, when the protein is the same size or smaller than the DNA or it only covers a fraction of the DNA, DNA-DNA and DNA-protein interactions dominate crystal packing. Therefore, crystallization of protein-DNA complexes requires the systematic screening of DNA length4 and DNA ends (blunt or overhang)5-7. In this report, we describe how to design, optimize, purify and crystallize hemimethylated DNA duplexes containing tandem GATC repeats in complex with a dimeric variant of SeqA (SeqA&Delta;(41-59)-A25R) to obtain crystals suitable for structure determination.

Crystal structure of protein&#x2013;DNA complexes can provide insight into protein function, mechanism, as well as, the nature of the specific interaction. Here, we report how to optimize the length, sequence and ends of duplex DNA for co-crystallization with Escherichia coli SeqA, a negative regulator of replication initiation.

SeqA-DNA 단지의 결정에 대한 DNA의 Duplexes의 최적화를 반복

Escherichia coli SeqA is a negative regulator of DNA replication that prevents premature reinitiation events by sequestering hemimethylated GATC clusters ...

Preparation of DNA-crosslinked Polyacrylamide Hydrogels

Mechanobiology is an emerging scientific area that addresses the critical role of physical cues in directing cell morphology and function. For example, the effect of tissue elasticity on cell function is a major area of mechanobiology research because tissue stiffness modulates with disease, development, and injury. Static tissue-mimicking materials, or materials that cannot alter stiffness once cells are plated, are predominately used to investigate the effects of tissue stiffness on cell functions. While information gathered from static studies is valuable, these studies are not indicative of the dynamic nature of the cellular microenvironment in vivo. To better address the effects of dynamic stiffness on cell function, we developed a DNA-crosslinked polyacrylamide hydrogel system (DNA gels). Unlike other dynamic substrates, DNA gels have the ability to decrease or increase in stiffness after fabrication without stimuli. DNA gels consist of DNA crosslinks that are polymerized into a polyacrylamide backbone. Adding and removing crosslinks via delivery of single-stranded DNA allows temporal, spatial, and reversible control of gel elasticity. We have shown in previous reports that dynamic modulation of DNA gel elasticity influences fibroblast and neuron behavior. In this report and video, we provide a schematic that describes the DNA gel crosslinking mechanisms and step-by-step instructions on the preparation DNA gels.

Our laboratory has developed DNA-crosslinked polyacrylamide hydrogels, a dynamic hydrogel system, to better understand the effects of modulating tissue stiffness on cell function. Here, we provide schematics, descriptions, and protocols to prepare these hydrogels.

DNA-가교 폴리 아크릴 아미드 하이드로 겔의 제조

Mechanobiology is an emerging scientific area that addresses the critical role of physical cues in directing cell morphology and function. For example, ...

Real-time Imaging of Single Engineered RNA Transcripts in Living Cells Using Ratiometric Bimolecular Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the development of diverse techniques to visualize individual RNA transcripts in single living cells. One promising technique that has recently been described utilizes an oligonucleotide-based optical probe, ratiometric bimolecular beacon (RBMB), to detect RNA transcripts that were engineered to contain at least four tandem repeats of the RBMB target sequence in the 3&#8217;-untranslated region. RBMBs are specifically designed to emit a bright fluorescent signal upon hybridization to complementary RNA, but otherwise remain quenched. The use of a synthetic probe in this approach allows photostable, red-shifted, and highly emissive organic dyes to be used for imaging. Binding of multiple RBMBs to the engineered RNA transcripts results in discrete fluorescence spots when viewed under a wide-field fluorescent microscope. Consequently, the movement of individual RNA transcripts can be readily visualized in real-time by taking a time series of fluorescent images. Here we describe the preparation and purification of RBMBs, delivery into cells by microporation and live-cell imaging of single RNA transcripts.

Ratiometric bimolecular beacons (RBMBs) can be used to image single engineered RNA transcripts in living cells. Here, we describe the preparation and purification of RBMBs, delivery of RBMBs into cells by microporation and fluorescent imaging of single RNA transcripts in real-time.

비례 생체 분자 비콘을 사용하여 살아있는 세포의 단일 엔지니어링 RNA 성적 증명서의 실시간 영상

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the ...

Demonstration of Proteolytic Activation of the Epithelial Sodium Channel (ENaC) by Combining Current Measurements with Detection of Cleavage Fragments

The described methods can be used to investigate the effect of proteases on ion channels, receptors, and other plasma membrane proteins heterologously expressed in Xenopus laevis oocytes. In combination with site-directed mutagenesis, this approach provides a powerful tool to identify functionally relevant cleavage sites. Proteolytic activation is a characteristic feature of the amiloride-sensitive epithelial sodium channel (ENaC). The final activating step involves cleavage of the channel&#8217;s &#947;-subunit in a critical region potentially targeted by several proteases including chymotrypsin and plasmin. To determine the stimulatory effect of these serine proteases on ENaC, the amiloride-sensitive whole-cell current (&#916;Iami) was measured twice in the same oocyte before and after exposure to the protease using the two-electrode voltage-clamp technique. In parallel to the electrophysiological experiments, a biotinylation approach was used to monitor the appearance of &#947;ENaC cleavage fragments at the cell surface. Using the methods described, it was demonstrated that the time course of proteolytic activation of ENaC-mediated whole-cell currents correlates with the appearance of a &#947;ENaC cleavage product at the cell surface. These results suggest a causal link between channel cleavage and channel activation. Moreover, they confirm the concept that a cleavage event in &#947;ENaC is required as a final step in proteolytic channel activation. The methods described here may well be applicable to address similar questions for other types of ion channels or membrane proteins.

Demonstration of Proteolytic Activation of the Epithelial Sodium Channel ENaC by Combining Current Measurements with Detection of Cleavage Fragments

Proteolytic activation of the epithelial sodium channel (ENaC) heterologously expressed in Xenopus laevis oocytes can be demonstrated by combining current measurements with a biotinylation approach to investigate the appearance of ion channel cleavage products at the cell surface. Functionally important cleavage sites can be identified by using site-directed mutagenesis.

절단 조각의 탐지와 전류 측정을 결합하여 상피 나트륨 채널 (ENAC)의 단백질 분해 활성의 데모

The described methods can be used to investigate the effect of proteases on ion channels, receptors, and other plasma membrane proteins heterologously ...