Name: understanding dissolved organic matter biogeochemistry through in situ nutrient manipulations in stream ecosystems
Uploaded: 2016-10-29T15:00:00.000+00:00
Duration: 9 min 38 s
Description: Watch this Scientific Journal Video about Understanding Dissolved Organic Matter Biogeochemistry Through In Situ Nutrient Manipulations in Stream Ecosystems at JoVE.com

The authors acknowledge the Water Quality Analysis Laboratory at the University of New Hampshire for assistance with sample analysis. The authors also thank two anonymous reviewers whose comments have helped to improve the manuscript. This work is funded by the National Science Foundation (DEB-1556603). Partial funding was also provided by the EPSCoR Ecosystems and Society Project (NSF EPS-1101245), New Hampshire Agricultural Experiment Station (Scientific Contribution #2662, USDA National Institute of Food and Agriculture (McIntire-Stennis) Project (1006760), the University of New Hampshire Graduate School, and the New Hampshire Water Resources Research Center.

1. Identifying and Characterizing the Ideal Experimental Stream Reach
<ol>
	<li>Ensure that experimental stream reaches are long enough to promote complete mixing of solutes11 and long enough where biological uptake can occur. Reach lengths can vary among streams and experiments. In small first-order headwater streams, reach length may vary from 20-150 m (or longer if the system requires it) depending on discharge and other physical properties of the stream.
	<ol>
		<li>Exclude large pools from experimental reaches, as they retard the downstream movement of solutes, minimal flow sections, and tributaries that dilute the added solution. Times of low discharge may require shortening the reach length while higher discharge may require a longer reach.</li>
		<li>Identify a location at the top of the experimental stream reach above a riffle to facilitate mixing of the added solutes. This will be the addition site. At the bottom of the experimental stream reach, identify a location where flow is constricted and representative of about 90% of the total flow (Figure 1). This will be the sample collection site.</li>
	</ol>
	</li>
</ol>
<img alt="Figure 1" src="/files/ftp_upload/54704/54704fig1.jpg" /> 
Figure 1: Example of Downstream Sampling Site. An ideal sampling site is where the majority of flow is constricted and easily accessible without disturbance of the stream channel and benthos. Here a fallen piece of wood debris has created this sampling point in a small first-order headwater stream. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/54704/54704fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<ol start="2">
	<li>Obtain discharge measurement and background nutrient concentrations of the solutes of interest prior to experiments in order to calculate the mass of solutes needed for the manipulations. Please see calculations in step 2.2.1.
	<ol>
		<li>Obtain background concentration data for the target solute of manipulation (e.g. NO3-) and chloride (Cl-) which is often used as the conservative tracer. Use the conservative tracer in the context of these experiments, to track changes in conductivity, which indicate the arrival of the nutrient pulse at the sampling station and the rate in which the pulse is passing through. Conductivity, or specific conductance, is a surrogate for in-situ changes in concentration of the conservative tracer.</li>
		<li>Characterize the physio-chemical properties of the experimental reach by collecting ancillary data such as reach width and depth, temperature, pH and dissolved oxygen.
		<ol>
			<li>Perform measurements that cannot be made with the use of an environmental probe (e.g. width and depth), the day before or immediately after the experiment in order to minimize any benthic or chemical disturbance within the stream channel. Divide the experimental reach in equidistant transects (e.g. every 10 m) where width and at least 3 depth measurements can be assessed (e.g. right bank, thalweg, and left bank). These data are valuable to connect the physical properties of a stream to biogeochemical measurements and if the researchers are also interested in calculating nutrient uptake kinetics and parameters6.</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
2. Preparation for Experiment
<ol>
	<li>Determine the mass (kg) of solute required for manipulation using the outlined equations below. 
	Note: The example below applies to a nitrate-based experiment with NO3- in the form of sodium nitrate (NaNO3) and assumes a targeted increase of 3x above background (equations are based on those of Kilpatrick and Cobb12). In this example the following assumptions have been made with respect to background conditions: discharge = 10 L/sec; [Cl] = 10 mg/L; [NO3-] = 50 &#181;g N/L. Due to variation among experiments, adjust required input data.
	<ol>
		<li>Calculate the Targeted increase (Equation 1): 
		Targeted [NO3- &#956;g N/L] increase = expected background [NO3- &#956;g N/L] * targeted increase 
		150 &#956;g N/L = 50 &#956;g N/L * 3</li>
		<li>Calculate the total atomic mass flux (Equation 2): 
		Total atomic mass flux (NO3- &#956;g N) = 30 min * 60 sec * Q(L/sec) * targeted [NO3- &#956;g N/L] increase 
		Where 30 minutes is the assumed duration of solute peak12 and Q is discharge 
		2 700 000 &#956;g N = 30 min * 60 sec * 10 L/s * 150 &#956;g N/L</li>
		<li>Calculate the total molecular mass flux (Equation 3): 
		Total molecular mass flux (NO3- &#956;g N) = total atomic mass flux (NO3- &#956;g N)/atomic mass (14) * molecular weight (85) 
		Where atomic mass refers to N and molecular weight refers to NaNO3. 
		16,392,857.14 &#956;g N = 2,700,000 &#956;g N/(14 * 85)&#160;</li>
		<li>Calculate the mass to add (Equation 4): 
		Mass to add (g) = total molecular mass flux (NO3- &#956;g N)/1,000,000 g/&#956;g 
		16.39 g NaNO3 = 16,392,857.14 &#956;g N/1,000,000 g/&#956;g 
		Note: Follow the above calculations for any other solutes including the conservative tracer (e.g. sodium chloride). Make sure to adjust the atomic and molecular masses for the solute of interest.</li>
	</ol>
	</li>
	<li>Prepare all solutes one day prior to field experiments. Weigh out enough solutes to raise the ambient concentration of both the biological tracer and the conservative tracer three times (or desired amount) above background. It is important that the quantity of added solutes causes a measureable change above background concentration that is sufficient to create a wide dynamic range in added nutrient concentration.
	<ol>
		<li>Weigh solutes using analytical scales and subsequently store in clean acid-washed high-density polyethylene bottles with appropriate labels. Examples of biological tracers include: NO3-: sodium nitrate (NaNO3); NH4+: ammonium chloride (NH4Cl); PO4-3: potassium phosphate (K2HPO4). However, the choice of biological tracer will be a function of the biogeochemical question being asked. Options for conservative tracers include sodium chloride (NaCl) and sodium bromide (NaBr).</li>
	</ol>
	</li>
	<li>Collect remaining materials: field book, labeling tape and pen, field measuring tape, cooler, conductivity meter, ~ 20 L bucket and large stirring rod (e.g. beer paddle, rebar, large stick), approximately 50 clean and acid-washed 125 ml high-density polyethylene bottles. Label the 125 ml bottles #1-50. 
	Note: Less than 50 samples can be taken per experiment and background samples are included in the 50 total bottles.</li>
	<li>Optional: Depending on the numbers of field personnel, perform sample filtering on-site (see section #5). If this option is chosen, bring 50 clean, pre-labeled and acid-washed 60 ml high-density polyethylene bottles into the field. Label the 60 ml bottles #1-50 to match the 125 ml collection bottles.</li>
</ol>
3. Day of Set Up
<ol>
	<li>Deploy the field conductivity meter at the collection site. Place the instrument upstream (approximately 0.5-1.0 m) of where samples will be taken so sample collection does not interfere with instrument readings. The meter will remain in place throughout the experiment. A field conductivity meter is best as it provides real-time conductivity readings, which are required to determine the sampling rate (see step 5.2) and filtration and analysis order (steps 5.3 and 6.1).</li>
	<li>Collect 125 ml background samples in triplicate at the addition site and at the collection site of the experimental reach prior to the addition of the solution. These data will be used to verify day-of ambient concentration and to determine variation in solute concentration along the stream reach. These data are also valuable to connect ambient stream chemistry (e.g. DOC: NO3- ratios13) to the biogeochemical measurements of interest.</li>
	<li>Record the time and conductivity of background samples collected.</li>
	<li>Record the background conductivity of stream prior to addition of solutions.</li>
</ol>
4. Adding Solutes
<ol>
	<li>Pour all reagents (16.39 g NaNO3 and 1483 g NaCl) into a large container (e.g. 20 L bucket) and add enough stream water to completely dissolve the solutes. Rinse reagent vessels thrice with additional stream water and pour rinse into solution container. Keep track of amount of water added.
	<ol>
		<li>For example, use a 500 ml bottle to pour stream water into the container. Stir solution until all reagents have been completely dissolved.</li>
	</ol>
	</li>
	<li>Collect 60 ml aliquot of the addition solution. Keep this highly concentrated sample separate (e.g. zip-lock bag) from all other samples to minimize cross contamination. Such samples are important if calculating nutrient uptake kinetics6 is an additional goal of the research project as these samples can be used to determine the exact mass of solutes added.</li>
	<li>Pour solution into addition site. Do this by pouring the solution in a smooth and quick motion to minimize travel lag time and splashing that could reduce the amount of reagents added. Rinse the container and the stir stick three times in the stream immediately after the addition to guarantee all reagents have been added to the stream.
	<ol>
		<li>Record the time the solution was added: hr:min:sec.</li>
		<li>Record the masses of tracers added (e.g. NaNO3 and NaCl).</li>
		<li>After the solution has been added, do not disturb the stream. Make sure that all travel along the stream occurs on the banks to ensure that the stream benthos and the solution itself are not disturbed.</li>
	</ol>
	</li>
</ol>
5. Field Sampling
<ol>
	<li>Order sampling bottles in ascending order while waiting for solution to arrive to the sampling location. Travel time will be a function of discharge and reach length and can be determined ahead of time (one-day prior) either with a NaCl-only injection or rhodamine dye (which can be used to establish travel time14). 
	Note: If working on a DON-themed project, avoid using rhodamine dye as it is a type of DON and will therefore alter the ambient DON pool if any remains in the study reach.</li>
</ol>
<img alt="Figure 2" src="/files/ftp_upload/54704/54704fig2.jpg" /> 
Figure 2: Example Schematic of Solute Breakthrough Curve (BTC). A BTC represents changes in solute concentration over time and can be used to explain the transit and biogeochemical cycling of a tracer in a stream. Grab samples should be taken across the BTC with a frequency that gives equal representation to both the ascending and descending limbs of the BTC. <a href="https://jove.unicartagenaproxy.elogim.com/files/ftp_upload/54704/54704fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<ol start="2">
	<li>Sample Collection 
	Note: The over-arching objective of sample collection, is to adequately represent changes in solute concentration along both the rising and falling limbs of the break through curve (BTC) (Figure 2).
	<ol>
		<li>Upon arrival of the solution (detected via an increase in conductivity), collect samples in 125 ml bottles throughout the BTC by holding a 125 ml bottle into the main flow of water at the sampling point. Quickly rinse the bottle with stream water and discard rinse downstream and then take sample. Cap sample and place into cooler.</li>
		<li>Record the time (hr:min:sec) and conductivity of each sample taken along the BTC into a field book (Table 1).</li>
		<li>Collect samples based on time (e.g. 1 min intervals) or based on the rate at which conductivity changes. For example, if conductivity is changing quickly, sample every 30-60 sec until changes in conductivity slow, at which time samples can be taken every 5-10 min. For intervals based on conductivity, take samples every 15-30 units depending on the rate at which conductivity is changing.</li>
		<li>Sample until conductivity returns to background or within 5 &#181;S/cm of background conditions. Intervals of sample collection can be adjusted during the experiment as long as the BTC is well represented in the grab samples.</li>
	</ol>
	</li>
</ol>
<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Bottle #</td>
			<td>Specific Conductance</td>
			<td>Time</td>
			<td>Notes</td>
		</tr>
		<tr>
			<td>1</td>
			<td></td>
			<td>hr:min:sec</td>
			<td>e.g. background (downstream)</td>
		</tr>
		<tr>
			<td>2</td>
			<td></td>
			<td></td>
			<td>e.g. background (downstream)</td>
		</tr>
		<tr>
			<td>3</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>4</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>5</td>
			<td></td>
			<td></td>
			<td>e.g. sample at peak conductance</td>
		</tr>
		<tr>
			<td>.</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>.</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>.</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Highest Bottle #</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
	</tbody>
</table>
Table 1PField book: Example Page from Lab Book and Required Information
<ol start="3">
	<li>Sample Filtering 
	Note: Filtering of samples can occur either in the field or upon returning to the laboratory.
	<ol>
		<li>Filter samples from the rising limb in order of ascending specific conductivity until the peak in specific conductivity. Wait for the experiment to be over and filter samples from the falling limb in ascending order of specific conductivity (i.e. start with the last sample and work backwards toward peak specific conductivity). 
		Note: This order of samples minimizes cross contamination between samples and allows for the same filter, syringe, and filter holder to be used as long as the filter, syringe and filter holder are appropriately rinsed in between each sample (see steps 5.3.2-5.3.4).</li>
		<li>Remove plunger from a 60 ml syringe and then close stop-cock. Pour ~10 ml of sample into syringe and return plunger to syringe. Shake syringe so that sample rinses internal walls of syringe. Attached syringe to filter-holder and open stop-cock. Push sample through filter-holder and discard rinse.</li>
		<li>Remove plunger and close stop-cock. Pour ~30 ml of sample into syringe and return plunger to syringe. Open stock-cock and expel ~10 ml through filter-holder and into 60 ml sampling bottle. Cap the bottle, swirl with filtrate and discard. Repeat this step for a total of 3 rinses. This will ensure any impurities have been removed from the 60 ml sample bottle and that the walls are coated with sample.</li>
		<li>Remove plunger and close stop-cock. Pour ~60 ml of sample into syringe and return plunger to syringe. Push the sample through the filter holder and into the 60 ml sample bottle. Fill bottles up to the shoulder to prevent cracking of bottles when frozen. Cap bottle and place into cooler.</li>
		<li>Repeat steps 5.3.2-5.3.4 for all remaining samples. Change filter between rising and falling limb samples to minimize contamination.</li>
		<li>Transport samples back to the laboratory on the same day and on ice.</li>
	</ol>
	</li>
</ol>
6. Preparation for Laboratory Analysis
<ol>
	<li>If filtering of samples is to occur in the laboratory, follow protocol as outlined in section 5.3.1. Filter samples from both the ascending and descending limbs of the BTC in order of increasing conductivity. Change the filter between rising limb and falling limb samples.</li>
	<li>Freeze filtered samples at -20 &#176;C until analysis.</li>
	<li>Ensure that analytical facilities are equipped to handle highly concentrated samples. 
	Note: Some laboratories are not equipped to run highly concentrated samples and thus care should be taken. Incorporate prepared standards that capture that higher end of expected solute concentrations. High concentration standards will help to ensure a standard curve that captures the expected range of manipulated solute concentrations.</li>
	<li>Analyze samples from low to high conductivity on all analytical instruments. Ordering samples from low to high specific conductance prevents contamination of low salt/nutrient samples by high salt/nutrient samples. This means samples from the rising and falling limbs will be mixed with respect to sequence.
	<ol>
		<li>Analyze samples for total dissolved organic carbon, total dissolved nitrogen, nitrate and ammonium, although the exact combination of solute analysis will be a function of the research question (see Wymore et al.10 for example).</li>
	</ol>
	</li>
</ol>
7. Data Analysis
<ol>
	<li>Analyze the data using simple linear regression. The independent variable is the concentrations of the added nutrient and the dependent variable is DOM concentration either as DOC or DON. Each point on the figure represents one grab sample from the breakthrough curve and that sample&#39;s nutrient and DOC/DON concentration.</li>
</ol>

<ol>
	<li>Brookshire, E. N. J., Valett, H. M., Thomas, S. A., Webster, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atmospheric+N+deposition+increases+organic+N+loss+from+temperate+forests.">Atmospheric N deposition increases organic N loss from temperate forests.</a> Ecosystems. 10 (2), 252-262 (2007).</li><li>Bernhardt, E. S., McDowell, W. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Twenty+years+apart:+Comparisons+of+DOM+uptake+during+leaf+leachate+releases+to+Hubbard+Brook+Valley+streams+in+1979+and+2000.">Twenty years apart: Comparisons of DOM uptake during leaf leachate releases to Hubbard Brook Valley streams in 1979 and 2000.</a> J Geophys Res. 113, G03032 (2008).</li><li>Taylor, P. G., Townsend, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stoichiometric+control+of+organic+carbon-nitrate+relationships+from+soils+to+sea.">Stoichiometric control of organic carbon-nitrate relationships from soils to sea.</a> Nature. 464, 1178-1181 (2010).</li><li>Mulholland, P. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stream+denitrification+across+biomes+and+its+response+to+anthropogenic+nitrate+loading.">Stream denitrification across biomes and its response to anthropogenic nitrate loading.</a> Nature. 452, 202-205 (2008).</li><li>Tank, J. L., Rosi-Marshall, E. J., Baker, M. A., Hall, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Are+rivers+just+big+streams?+A+pulse+method+to+quantify+nitrogen+demand+in+a+large+river.">Are rivers just big streams? A pulse method to quantify nitrogen demand in a large river.</a> Ecology. 89 (10), 2935-2945 (2008).</li><li>Covino, T. P., McGlynn, B. L., McNamara, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tracer+additions+for+spiraling+curve+characterization+(TASCC):+quantifying+stream+nutrient+uptake+kinetics+from+ambient+to+saturation.">Tracer additions for spiraling curve characterization (TASCC): quantifying stream nutrient uptake kinetics from ambient to saturation.</a> Limnol Oceanogr. 8, 484-498 (2010).</li><li>Johnson, L. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantifying+the+production+of+dissolved+organic+nitrogen+in+headwater+streams+using+15+N+tracer+additions.">Quantifying the production of dissolved organic nitrogen in headwater streams using 15 N tracer additions.</a> Limnol Oceanogr. 58 (4), 1271-1285 (2013).</li><li>Rosemond, A. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+nutrient+additions+accelerate+terrestrial+carbon+loss+from+stream+ecosystems.">Experimental nutrient additions accelerate terrestrial carbon loss from stream ecosystems.</a> Science. 347 (6226), 1142-1145 (2015).</li><li>Diemer, L. A., McDowell, W. H., Wymore, A. S., Prokushkin, A. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nutrient+uptake+along+a+fire+gradient+in+boreal+streams+of+Central+Siberia.">Nutrient uptake along a fire gradient in boreal streams of Central Siberia.</a> Freshwater Sci. 34 (4), 1443-1456 (2015).</li><li>Wymore, A. S., Rodr&#237;guez-Cardona, B., McDowell, W. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+response+of+dissolved+organic+nitrogen+to+nitrate+availability+in+headwater+streams.">Direct response of dissolved organic nitrogen to nitrate availability in headwater streams.</a> Biogeochemistry. 126 (1), 1-10 (2015).</li><li>Stream Solute Workshop. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Concepts+and+methods+for+assessing+solute+dynamics+in+stream+ecosystems.">Concepts and methods for assessing solute dynamics in stream ecosystems.</a> J N Am Benthol Soc. 9 (2), 95-119 (1990).</li><li>Kilpatrick, F. A., Cobb, E. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Measurement of discharge using tracers: U.S Geological Survey Techniques of Water-Resources Investigations. , (1985).</li><li>Rodr&#237;guez-Cardona, B., Wymore, A. S., McDowell, W. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DOC:+NO3-+and+NO3-+uptake+in+forested+headwater+streams.">DOC: NO3- and NO3- uptake in forested headwater streams.</a> J Geophys Res - Biogeo. 121, (2016).</li><li>Kilpatrick, F. A., Wilson, J. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Book+3+Chapter+A9,+Measurement+of+time+of+travel+in+streams+by+dye+tracing.">Book 3 Chapter A9, Measurement of time of travel in streams by dye tracing.</a> Techniques of Water-Resources Investigations of the United States Geological Survey. , (1989).</li><li>Lutz, B. D., Bernhardt, E. S., Roberts, B. J., Mulholland, P. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Examining+the+coupling+of+carbon+and+nitrogen+cycles+in+Appalachian+streams:+the+role+of+dissolved+organic+nitrogen.">Examining the coupling of carbon and nitrogen cycles in Appalachian streams: the role of dissolved organic nitrogen.</a> Ecology. 92 (3), 720-732 (2011).</li><li>Michalzik, B., Matzner, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamics+of+dissolved+organic+nitrogen+and+carbon+in+a+Central+European+Norway+spruce+ecosystem.">Dynamics of dissolved organic nitrogen and carbon in a Central European Norway spruce ecosystem.</a> Eur J Soil Sci. 50 (4), 579-590 (1990).</li><li>Solinger, S., Kalbitz, K., Matzner, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controls+on+the+dynamics+of+dissolved+organic+carbon+and+nitrogen+in+a+Central+European+deciduous+forest.">Controls on the dynamics of dissolved organic carbon and nitrogen in a Central European deciduous forest.</a> Biogeochemistry. 55 (3), 327-349 (2001).</li><li>Kaushal, S. S., Lewis, W. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Patterns+in+chemical+fractionation+of+organic+nitrogen+in+Rocky+Mountain+streams.">Patterns in chemical fractionation of organic nitrogen in Rocky Mountain streams.</a> Ecosystems. 6 (5), 483-492 (2003).</li><li>Kaushal, S. S., Lewis, W. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fate+and+transport+of+organic+nitrogen+in+minimally+disturbed+montane+streams+of+Colorado,+USA.">Fate and transport of organic nitrogen in minimally disturbed montane streams of Colorado, USA.</a> Biogeochemistry. 74 (3), 303-321 (2005).</li></ol>

The authors have nothing to disclose.

The objective of the nutrient pulse method, as presented here, is to characterize and quantify the response of the highly diverse pool of ambient stream water DOM across a dynamic range of an added inorganic nutrient. If the added solute sufficiently increases the concentration of the reactive solute, a large inferential space can be created to understand how the biogeochemical cycling of DOM is linked to nutrient concentrations. This nutrient pulse approach is ideal as it involves none of the machinery associated with p...

溶存有機物（DOM）は、生態系を淡水する重要なエネルギー及び栄養源を提供し、0.7μmのフィルターを通過する有機物として定義されます。水界生態系の中では、DOMは、光の減衰と金属錯体形成に影響を与えることができます。 DOMは、種々の官能基を有する有機化合物、並びに窒素（N）とリン（P）などの必須栄養素の非常に多様かつ不均一な混合物です。用語「DOM」はそのC、NおよびP成分を含むプール全体を説明しているが、その濃度は、溶存有機炭素（DOC）として測定されます。 DOMプールの固有の分子の複雑さは、しかし、その研究への挑戦を作成します。例えば、このような溶存有機態窒素（DON）と溶存有機リン（DOP）などの有機栄養素からなる総DOMプールの割合を測定する直接的な方法はありません。代わりに、有機栄養素の濃度の差によって決定されなければなりません（ <em&gt;例えば[DON] = [総溶存窒素] - [溶存無機窒素]）。 ストリームに現実的なDOMの修正を追加することは、周囲のDOMプールの多様性のために困難です。以前の研究では、単一の炭素源（ 例えば、グルコース、尿素1）を追加しました または落葉浸出液2のような特定のソースは、フィールド中の濃度を操作することができます。しかし、これらのソースは、周囲のDOMプールの特に代表的なものではありません。その後の実験のために周囲のDOMを絞り込むか、集中しようとすると、処理中の特定の画分（ 例えば 、高度に不安定な部品）の損失を含む困難に細工されています。その結果、我々は、現在、直接周囲DOMプールを操作する任意の方法を持たないように、周囲のDOMプールのコントロールを理解することは困難です。しかし、DOMの生物地球化学は、 例えば 、NIT（一般的な環境で見つかった栄養素にリンクされているので、レート[NO 3 - ] 3）、私たちは生態系をストリーミングし、これらの操作にDOMプールの応答を測定する他の溶質を追加することができます。 DOMプールは、我々はDOMは環境条件の変動にどのように応答するかをより深い洞察を得るために願って実験的に課せられた栄養広範囲の濃度にどのように応答するかを調べることによって。 一般的にストリームの生物地球化学に使用される1つの方法は、栄養添加方法です。栄養添加実験は、伝統的に取り込み速度または添加溶質4,5,6,7-の運命を理解するために使用されてきました。栄養添加物は、複数年8にわたって日スケール4、または長期的な操作に時間6に短期的であることができます。生物地球化学反応を介して追加された栄養素をトレースする-栄養添加物はまた、同位体標識された栄養素（ 例えば、15 N-NO 3）を含むことができます。しかし、同位体ベースの研究は、多くの場合、EXPEですnsiveと同位体で標識された栄養素を保持することができる複数の底生区画の挑戦的な分析（ 例えば消化）が必要です。最近の実験はその場生物地球化学的反応でリアルタイムに検討することにより、新しい方法を明らかにし、そのようなDOM 9,10-などの非添加し、周囲の溶質上のコントロールを解明する短期的な栄養パルスの有用性を明らかにしました。ここでは説明し、非常に多様なDOMプールでCとNと特異的にコントロールの結合された生物地球化学を理解することを目的とした短期的な栄養パルスを実施するための鍵の方法論の手順を示しています。この簡単に再現性のある方法は、実験的なストリームリーチに栄養パルスを追加し、操作溶質と関心の応答変数（ 例えば DOC、DON、DOP）の両方の濃度の変化を測定することを含みます。直接その場で栄養濃度を操作することによって、我々は間接的にDOMを変更することができます栄養濃度10のダイナミックレンジ全体でどのようにDOMの濃度変化をプールし、検討します。

<table><tbody><tr><td>Sodium Nitrate</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Sodium Chloride</td><td>Any</td><td>Any</td><td>Store purchased table salt can be used as well, however, it does contain trace levels of impurities</td></tr><tr><td>Whatman GFF glass-fiber filters</td><td>Any</td><td>Any</td><td></td></tr><tr><td>BD Filtering Syringe</td><td>Any</td><td>Any</td><td></td></tr><tr><td>EMD Millipore Swinnex Filter Holders</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Syringe stop-cock</td><td>Any</td><td>Any</td><td></td></tr><tr><td>YSI Multi-parameter probe</td><td>Yellow Springs International</td><td>556-01</td><td></td></tr><tr><td>Wide mouth HDPE 125 ml bottles</td><td>Any</td><td>Any</td><td></td></tr><tr><td>60 ml HDPE bottles</td><td>Any</td><td>Any</td><td></td></tr><tr><td>20 L bucket</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Field measuring tape</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Lab labeling tape</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Stir stick</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Cooler</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Sharpie pen</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Field notebook</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Tweezers</td><td>Any</td><td>Any</td><td></td></tr><tr><td>Zip-lock bags</td><td>Any</td><td>Any</td><td></td></tr></tbody></table>

understanding dissolved organic matter biogeochemistry through in situ nutrient manipulations in stream ecosystems

Dissolved organic matter (DOM) is a highly diverse mixture of molecules providing one of the largest sources of energy and nutrients to stream ecosystems. Yet the in situ study of DOM is difficult as the molecular complexity of the DOM pool cannot be easily reproduced for experimental purposes. Nutrient additions to streams however, have been shown to repeatedly alter the in situ and ambient DOM pool. Here we demonstrate an easily replicable field-based method for manipulating the ambient pool of DOM at the ecosystem scale. During nutrient pulse experiments changes in the concentration of both dissolved organic carbon and dissolved organic nitrogen can be examined across a wide-range of nutrient concentrations. This method allows researchers to examine the controls on the DOM pool and make inferences regarding the role and function that certain fractions of the DOM pool play within ecosystems. We advocate the use of this method as a technique to help develop a deeper understanding of DOM biogeochemistry and how it interacts with nutrients. With further development this method may help elucidate the dynamics of DOM in other ecosystems.

<img alt="Figure 3" src="/files/ftp_upload/54704/54704fig3.jpg" /> 
Figure 3: Example Results from Nitrate (NO3-) Additions with Dissolved Organic Nitrogen (DON) as the Response Variable. Analyses are linear regressions. Asterisks represent statistical significance at &#945; = 0.05. Note the dynamic range in NO3- concentration that was achieved with the nutrient pulse method. Different pane...

Watch this Scientific Journal Video about Understanding Dissolved Organic Matter Biogeochemistry Through In Situ Nutrient Manipulations in Stream Ecosystems at JoVE.com

河川生態系におけるその場での栄養塩操作を通じた溶存有機物の生物地球化学の理解 |環境 |ビデオ

Understanding Dissolved Organic Matter Biogeochemistry Through In Situ Nutrient Manipulations in Stream Ecosystems

Dissolved organic matter provides an important source of energy and nutrients to stream ecosystems. Here we demonstrate a field-based method to manipulate the ambient pool of dissolved organic matter in situ through easily replicable nutrient pulses.

溶存有機物生物地球化学を理解します<em&gt;その場で</em&gt;ストリーム生態系における栄養操作を

Dissolved organic matter (DOM) is a highly diverse mixture of molecules providing one of the largest sources of energy and nutrients to stream ecosystems. ...

understanding-dissolved-organic-matter-biogeochemistry-through-situ

Universidad de Cartagena UDEC

Research

Education

JoVE Journal

JoVE Core

Biology

Environment

Understanding Dissolved Organic Matter Biogeochemistry Through In Situ Nutrient Manipulations in Stream Ecosystems

Ecology

Ecosystems

SCIENTISTS IN ACTION

10.1K ビュー.  University of New Hampshire. Dissolved organic matter provides an important source of energy and nutrients to stream ecosystems. Here we demonstrate a field-based method to manipulate the ambient pool of dissolved organic matter in situ through easily replicable nutrient pulses.

ビデオ: Understanding Dissolved Organic Matter Biogeochemistry Through In Situ Nutrient Manipulations in Stream Ecosystems

Unraveling the Unseen Players in the Ocean - A Field Guide to Water Chemistry and Marine Microbiology

Here we introduce a series of thoroughly tested and well standardized research protocols adapted for use in remote marine environments. The sampling protocols include the assessment of resources available to the microbial community (dissolved organic carbon, particulate organic matter, inorganic nutrients), and a comprehensive description of the viral and bacterial communities (via direct viral and microbial counts, enumeration of autofluorescent microbes, and construction of viral and microbial metagenomes). We use a combination of methods, which represent a dispersed field of scientific disciplines comprising already established protocols and some of the most recent techniques developed. Especially metagenomic sequencing techniques used for viral and bacterial community characterization, have been established only in recent years, and are thus still subjected to constant improvement. This has led to a variety of sampling and sample processing procedures currently in use. The set of methods presented here provides an up to date approach to collect and process environmental samples. Parameters addressed with these protocols yield the minimum on information essential to characterize and understand the underlying mechanisms of viral and microbial community dynamics. It gives easy to follow guidelines to conduct comprehensive surveys and discusses critical steps and potential caveats pertinent to each technique.

Here, we present a comprehensive protocol to assess the organic and inorganic nutrient availability and the abundance and structure of microbial and viral communities in remote marine environments.

水化学と海洋微生物学へのフィールドガイド - 海における幽玄選手の解明

Here we introduce a series of thoroughly tested and well standardized research protocols adapted for use in remote marine environments. The sampling ...

環境学

Chemotactic Response of Marine Micro-Organisms to Micro-Scale Nutrient Layers

The degree to which planktonic microbes can exploit microscale resource patches will have considerable implications for oceanic trophodynamics and biogeochemical flux. However, to take advantage of nutrient patches in the ocean, swimming microbes must overcome the influences of physical forces including molecular diffusion and turbulent shear, which will limit the availability of patches and the ability of bacteria to locate them. Until recently, methodological limitations have precluded direct examinations of microbial behaviour within patchy habitats and realistic small-scale flow conditions. Hence, much of our current knowledge regarding microbial behaviour in the ocean has been procured from theoretical predictions. To obtain new information on microbial foraging behaviour in the ocean we have applied soft lithographic fabrication techniques to develop 2 microfluidic devices, which we have used to create (i) microscale nutrient patches with dimensions and diffusive characteristics relevant to oceanic processes and (ii) microscale vortices, with shear rates corresponding to those expected in the ocean. These microfluidic devices have permitted a first direct examination of microbial swimming and chemotactic behaviour within a heterogeneous and dynamic seascape. The combined use of epifluorescence and phase contrast microscopy allow direct examinations of the physical dimensions and diffusive characteristics of nutrient patches, while observing the population-level aggregative response, in addition to the swimming behaviour of individual microbes. These experiments have revealed that some species of phytoplankton, heterotrophic bacteria and phagotrophic protists are adept at locating and exploiting diffusing microscale resource patches within very short time frames. We have also shown that up to moderate shear rates, marine bacteria are able to  fight the flow  and swim through their environment at their own accord. However, beyond a threshold high shear level, bacteria are aligned in the shear flow and are less capable of swimming without disturbance from the flow. Microfluidics represents a novel and inexpensive approach for studying aquatic microbial ecology, and due to its suitability for accurately creating realistic flow fields and substrate gradients at the microscale, is ideally applicable to examinations of microbial behaviour at the smallest scales of interaction.  We therefore suggest that microfluidics represents a valuable tool for obtaining a better understanding of the ecology of microorganisms in the ocean.

The fabrication of microfluidic channels and their implementation in experiments for studying the chemotactic foraging behaviour of marine microbes within a patchy nutrient seascape and the swimming behaviour of bacteria within shear flow are described.

マイクロスケール栄養層への海洋微生物の走化性応答

The degree to which planktonic microbes can exploit microscale resource patches will have considerable implications for oceanic trophodynamics and ...

生物学

The Benthic Exchange of O2, N2 and Dissolved Nutrients Using Small Core Incubations

The measurement of sediment-water exchange of gases and solutes in aquatic sediments provides data valuable for understanding the role of sediments in nutrient and gas cycles. After cores with intact sediment-water interfaces are collected, they are submerged in incubation tanks and kept under aerobic conditions at in situ temperatures. To initiate a time course of overlying water chemistry, cores are sealed without bubbles using a top cap with a suspended stirrer. Time courses of 4-7 sample points are used to determine the rate of sediment water exchange. Artificial illumination simulates day-time conditions for shallow photosynthetic sediments, and in conjunction with dark incubations can provide net exchanges on a daily basis. The net measurement of N2 is made possible by sampling a time course of dissolved gas concentrations, with high precision mass spectrometric analysis of N2:Ar ratios providing a means to measure N2 concentrations. We have successfully applied this approach to lakes, reservoirs, estuaries, wetlands and storm water ponds, and with care, this approach provides valuable information on biogeochemical balances in aquatic ecosystems.

The Benthic Exchange of O2, N2 and Dissolved Nutrients Using Small Core Incubations

Here, we present small core incubations for the measurement of sediment-water gas and solute exchange. These will provide reliable measurements of sediment-water exchange that assess the role of sediment in influencing biological and biogeochemical processes in aquatic ecosystems.

Oの底生交流<sub&gt; 2</sub&gt;、N<sub&gt; 2</sub小さなコアインキュベーションを使用&gt;と溶存栄養素

The measurement of sediment-water exchange of gases and solutes in aquatic sediments provides data valuable for understanding the role of sediments in ...

A Simple Approach to Manipulate Dissolved Oxygen for Animal Behavior Observations

The ability to manipulate dissolved oxygen (DO) in a laboratory setting has significant application to investigate a number of ecological and organismal behavior questions. The protocol described here provides a simple, reproducible, and controlled method to manipulate DO to study behavioral response in aquatic organisms resulting from hypoxic and anoxic conditions. While performing degasification of water with nitrogen is commonly used in laboratory settings, no explicit method for ecological (aquatic) application exists in the literature, and this protocol is the first to describe a protocol to degasify water to observe organismal response. This technique and protocol were developed for direct application for aquatic macroinvertebrates; however, small fish, amphibians, and other aquatic vertebrates could be easily substituted. It allows for easy manipulation of DO levels ranging from 2 mg/L to 11 mg/L with stability for up to a 5 min animal-observation period. Beyond a 5 min observation period water temperatures began to rise, and at 10 min DO levels became too unstable to maintain. The protocol is scalable to the study organism, reproducible, and reliable, allowing for rapid implementation into introductory teaching labs and high-level research applications. The expected results of this technique should relate dissolved oxygen changes to behavioral responses of organisms.

This article describes a simple and reproducible protocol to manipulate dissolved oxygen conditions in a laboratory setting for animal behavior studies. This protocol may be used in both teaching and research laboratory settings to evaluate organismal response of macroinvertebrates, fishes, or amphibians to changes in dissolved oxygen concentration.

動物の行動観察のための溶存酸素を操作するための単純なアプローチ

The ability to manipulate dissolved oxygen (DO) in a laboratory setting has significant application to investigate a number of ecological and organismal ...

Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations

Studying co-evolution of hydrological and biogeochemical processes in the subsurface of natural landscapes can enhance the understanding of coupled Earth-system processes. Such knowledge is imperative in improving predictions of hydro-biogeochemical cycles, especially under climate change scenarios. We present an experimental method, designed to capture sub-surface heterogeneity of an initially homogeneous soil system. This method is based on destructive sampling of a soil lysimeter designed to simulate a small-scale hillslope. A weighing lysimeter of one cubic meter capacity was divided into sections (voxels) and was excavated layer-by-layer, with sub samples being collected from each voxel. The excavation procedure was aimed at detecting the incipient heterogeneity of the system by focusing on the spatial assessment of hydrological, geochemical, and microbiological properties of the soil. Representative results of a few physicochemical variables tested show the development of heterogeneity. Additional work to test interactions between hydrological, geochemical, and microbiological signatures is planned to interpret the observed patterns. Our study also demonstrates the possibility of carrying out similar excavations in order to observe and quantify different aspects of soil-development under varying environmental conditions and scale.

This study presents an excavation method for investigating subsurface hydrological, geochemical, and microbiological heterogeneity of a soil lysimeter. The lysimeter simulates an artificial hillslope which was initially under homogeneous condition and had been subjected to approximately 5,000 mm of water over eight cycles of irrigation in an 18-month period.

結合水文学、地球化学、および微生物学的調査のための土壌ライシメータ発掘

Studying co-evolution of hydrological and biogeochemical processes in the subsurface of natural landscapes can enhance the understanding of coupled ...

Single-throughput Complementary High-resolution Analytical Techniques for Characterizing Complex Natural Organic Matter Mixtures

Natural organic matter (NOM) is composed of a highly complex mixture of thousands of organic compounds which, historically, proved difficult to characterize. However, to understand the thermodynamic and kinetic controls on greenhouse gas (carbon dioxide [CO2] and methane [CH4]) production resulting from the decomposition of NOM, a molecular-level characterization coupled with microbial proteome analyses is necessary. Further, climate and environmental changes are expected to perturb natural ecosystems, potentially upsetting complex interactions that influence both the supply of organic matter substrates and the microorganisms performing the transformations. A detailed molecular characterization of the organic matter, microbial proteomics, and the pathways and transformations by which organic matter is decomposed will be necessary to predict the direction and magnitude of the effects of environmental changes. This article describes a methodological throughput for comprehensive metabolite characterization in a single sample by direct injection Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS), gas chromatography mass spectrometry (GC-MS), nuclear magnetic resonance (NMR) spectroscopy, liquid chromatography mass spectrometry (LC-MS), and proteomics analysis. This approach results in a fully-paired dataset which improves statistical confidence for inferring pathways of organic matter decomposition, the resulting CO2 and CH4 production rates, and their responses to environmental perturbation. Herein we present results of applying this method to NOM samples collected from peatlands; however, the protocol is applicable to any NOM sample (e.g., peat, forested soils, marine sediments, etc.).

This protocol describes a single throughput for complementary analytical and omics techniques culminating in a fully-paired characterization of natural organic matter and microbial proteomics in different ecosystems. This approach permits robust comparisons for identifying metabolic pathways and transformations important for describing greenhouse gas production and predicting responses to environmental change.

シングル スループット複雑な天然有機物の混合物の評価の補完的な高解像度分析の手法

Natural organic matter (NOM) is composed of a highly complex mixture of thousands of organic compounds which, historically, proved difficult to ...

Measurement of the Potential Rates of Dissimilatory Nitrate Reduction to Ammonium Based on 14NH4+/15NH4+ Analyses via Sequential Conversion to N2O

The importance of understanding the fate of nitrate (NO3&#8722;), which is the dominant N species transferred from terrestrial to aquatic ecosystems, has been increasing because global nitrogen loads have dramatically increased following industrialization. Dissimilatory nitrate reduction to ammonium (DNRA) and denitrification are both microbial processes that use NO3&#8722; for respiration. Compared to denitrification, quantitative determinations of the DNRA activity have been carried out only to a limited extent. This has led to an insufficient understanding of the importance of DNRA in NO3&#8722; transformations and the regulating factors of this process. The objective of this paper is to provide a detailed procedure for the measurement of the potential DNRA rate in environmental samples. In brief, the potential DNRA rate can be calculated from the 15N-labeled ammonium (15NH4+) accumulation rate in 15NO3&#8722; added incubation. The determination of the 14NH4+ and 15NH4+ concentrations described in this paper is comprised of the following steps. First, the NH4+ in the sample is extracted and trapped on an acidified glass filter as ammonium salt. Second, the trapped ammonium is eluted and oxidized to NO3&#8722; via persulfate oxidation. Third, the NO3&#8722; is converted to N2O via an N2O reductase deficient denitrifier. Finally, the converted N2O is analyzed using a previously developed quadrupole gas chromatography&#8211;mass spectrometry system. We applied this method to salt marsh sediments and calculated their potential DNRA rates, demonstrating that the proposed procedures allow a simple and more rapid determination compared to previously described methods.

Measurement of the Potential Rates of Dissimilatory Nitrate Reduction to Ammonium Based on 14NH4+/15NH4+ Analyses via Sequential Conversion to N2O

A series of methods to determine the potential DNRA rate based on 14NH4+/15NH4+ analyses is provided in detail. NH4+ is converted into N2O via several steps and analyzed using quadrupole gas chromatography&#8211;mass spectrometry.

N2Oへの逐次変換による14NH4+/154+ 1415NH4++分析に基づくアンモニウムへの非シミラトリー硝酸還元の電位率の測定

The importance of understanding the fate of nitrate (NO3&#8722;), which is the dominant N species transferred from terrestrial to aquatic ecosystems, has ...

Two-Dimensional Visualization and Quantification of Labile, Inorganic Plant Nutrients and Contaminants in Soil

We describe a method for two-dimensional (2D) visualization and quantification of the distribution of labile (i.e., reversibly adsorbed) inorganic nutrient (e.g., P, Fe, Mn) and contaminant (e.g., As, Cd, Pb) solute species in the soil adjacent to plant roots (the &#8216;rhizosphere&#8217;) at sub-millimeter (~100 &#181;m) spatial resolution. The method combines sink-based solute sampling by the diffusive gradients in thin films (DGT) technique with spatially resolved chemical analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The DGT technique is based on thin hydrogels with homogeneously distributed analyte-selective binding phases. The variety of available binding phases allows for the preparation of different DGT gel types following simple gel fabrication procedures. For DGT gel deployment in the rhizosphere, plants are grown in flat, transparent growth containers (rhizotrons), which enable minimal invasive access to a soil-grown root system. After a pre-growth period, DGT gels are applied to selected regions of interest for in situ solute sampling in the rhizosphere. Afterwards, DGT gels are retrieved and prepared for subsequent chemical analysis of the bound solutes using LA-ICP-MS line-scan imaging. Application of internal normalization using 13C and external calibration using matrix-matched gel standards further allows for the quantification of the 2D solute fluxes. This method is unique in its capability to generate quantitative, sub-mm scale 2D images of multi-element solute fluxes in soil-plant environments, exceeding the achievable spatial resolution of other methods for measuring solute gradients in the rhizosphere substantially. We present the application and evaluation of the method for imaging multiple cationic and anionic solute species in the rhizosphere of terrestrial plants and highlight the possibility of combining this method with complementary solute imaging techniques.

This protocol presents a workflow for sub-mm 2D visualization of multiple labile inorganic nutrient and contaminant solute species using diffusive gradients in thin films (DGT) combined with mass spectrometry imaging. Solute sampling and high-resolution chemical analysis are described in detail for quantitative mapping of solutes in the rhizosphere of terrestrial plants.

土壌中の不安定な植物、無機植物の栄養素および汚染物質の二次元可視化と定量化

We describe a method for two-dimensional (2D) visualization and quantification of the distribution of labile (i.e., reversibly adsorbed) inorganic ...

Dissolved Solute Sampling Across an Oxic-Anoxic Soil-Water Interface Using Microdialysis Profilers

Biogeochemical processes shift rapidly in both spatial (millimeter scale) and temporal (hour scale to day scale) dimensions at the oxic-anoxic interface in response to disturbances. Deciphering the rapid biogeochemical changes requires in situ, minimally invasive tools with high spatial and temporal sampling resolution. However, the available passive sampling devices are not very useful in many cases either due to their disposable nature or the complexity and extensive workload for sample preparation.
To address this problem, a microdialysis profiler with 33 individual polyethersulfone nanomembrane tubes (semipermeable, &#60;20 nm pore size) integrated into the one-dimensional skeleton (60 mm) was established to iteratively sample the dissolved compounds in porewater across the soil-water interface at a high resolution of 1.8 mm (outer diameter plus one spacing, i.e., 0.1 mm between probes). The sampling mechanism is based on the principle of concentration gradient diffusion. The automatic loading of degassed water allows minimal disturbance to the chemical species across the oxic-anoxic interface.
This paper describes the procedures of device setup and continuous porewater sampling across the soil-water interface on a daily basis. Concentration-depth profiles were selectively measured before (on Day 6) and after (on Day 7) disturbances induced by irrigation. The results showed that concentration-depth profiles were undergoing rapid changes, especially for redox-sensitive elements (i.e., iron and arsenic). These protocols can help investigate the biogeochemical responses across the soil-water interface under various disturbances caused by physical, chemical, and biological factors. The paper thoroughly discusses the advantages and disadvantages of this method for potential use in the environmental sciences.

A microdialysis profiler is described to sample dissolved porewater solutes across an oxic-anoxic soil-water interface in situ with minimal disturbance. This device is designed to capture rapid changes in concentration-depth profiles induced by disturbances at the soil-water interface and beyond.

マイクロ透析プロファイラーを用いた酸素-無酸素土壌-水界面での溶存溶質サンプリング

Biogeochemical processes shift rapidly in both spatial (millimeter scale) and temporal (hour scale to day scale) dimensions at the oxic-anoxic interface ...

栄養管理のための生物地球化学データの統合可視化

Visualization of Productivity Zones Based on Nitrogen Mass Balance Model in Narragansett Bay, Rhode Island

Primary productivity in the coastal regions, linked to eutrophication and hypoxia, provides a critical understanding of ecosystem function. Although primary productivity largely depends on riverine nutrient inputs, estimation of the extent of riverine nutrient influences in the coastal regions is challenging. A nitrogen mass balance model is a practical tool to evaluate coastal ocean productivity to understand biological mechanisms beyond data observations. This study visualizes the biological production zones in Narragansett Bay, Rhode Island, USA, where hypoxia frequently occurs, by applying a nitrogen mass balance model. The Bay is divided into three zones - brown, green, and blue zones - based on primary productivity, which are defined by the mass balance model results. Brown, green, and blue zones represent a high physical process, a high biological process, and a low biological process zone, depending on river flow, nutrient concentrations, and mixing rates. The results of this study can better inform nutrient management in the coastal ocean in response to hypoxia and eutrophication.

著者スポットライト:効果的な栄養管理のための河川窒素の影響と一次生産性の理解

Here, we aim to visualize the zonation of biological productivity in Narragansett Bay, Rhode Island, based on the nitrogen mass balance model. The results will inform nutrient management in the coastal regions to reduce hypoxia and eutrophication.

ロードアイランド州ナラガンセット湾における窒素マスバランスモデルに基づく生産性ゾーンの可視化

Primary productivity in the coastal regions, linked to eutrophication and hypoxia, provides a critical understanding of ecosystem function. Although ...

溶存有機物生物地球化学を理解します

要約

さらに動画を探す

この動画の章

水化学と海洋微生物学へのフィールドガイド - 海における幽玄選手の解明

マイクロスケール栄養層への海洋微生物の走化性応答

Oの底生交流

動物の行動観察のための溶存酸素を操作するための単純なアプローチ

結合水文学、地球化学、および微生物学的調査のための土壌ライシメータ発掘

シングルスループット複雑な天然有機物の混合物の評価の補完的な高解像度分析の手法

_N2Oへの逐次変換による14NH4+/15₄⁺ ¹⁴¹⁵_NH4+⁺分析に基づくアンモニウムへの非シミラトリー硝酸還元の電位率の測定

土壌中の不安定な植物、無機植物の栄養素および汚染物質の二次元可視化と定量化

マイクロ透析プロファイラーを用いた酸素-無酸素土壌-水界面での溶存溶質サンプリング

ロードアイランド州ナラガンセット湾における窒素マスバランスモデルに基づく生産性ゾーンの可視化

溶存有機物生物地球化学を理解します

要約

さらに動画を探す

この動画の章

水化学と海洋微生物学へのフィールドガイド - 海における幽玄選手の解明

マイクロスケール栄養層への海洋微生物の走化性応答

Oの底生交流

動物の行動観察のための溶存酸素を操作するための単純なアプローチ

結合水文学、地球化学、および微生物学的調査のための土壌ライシメータ発掘

シングル スループット複雑な天然有機物の混合物の評価の補完的な高解像度分析の手法

N2Oへの逐次変換による14NH4+/154+ 1415NH4++分析に基づくアンモニウムへの非シミラトリー硝酸還元の電位率の測定

土壌中の不安定な植物、無機植物の栄養素および汚染物質の二次元可視化と定量化

マイクロ透析プロファイラーを用いた酸素-無酸素土壌-水界面での溶存溶質サンプリング

ロードアイランド州ナラガンセット湾における窒素マスバランスモデルに基づく生産性ゾーンの可視化

シングルスループット複雑な天然有機物の混合物の評価の補完的な高解像度分析の手法

_N2Oへの逐次変換による14NH4+/15₄⁺ ¹⁴¹⁵_NH4+⁺分析に基づくアンモニウムへの非シミラトリー硝酸還元の電位率の測定