המחברים מבקשים להודות מימון ממשרד חינוך AcRF Tier 1 (RG41) ולהתחיל את המענק מהאוניברסיטה הטכנולוגית נניאנג. נמוך וTjin ממומנים על ידי מלגת סטודנט המחקר (RSS) מהאוניברסיטה הטכנולוגית נניאנג, סינגפור.

<ol>
	<li>Chen, Q., Liang, S., Thouas, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Elastomeric+biomaterials+for+tissue+engineering.">Elastomeric biomaterials for tissue engineering.</a> Prog Polym Sci. 38 (3-4), 584-671 (2013).</li><li>Groeber, F., Holeiter, M., Hampel, M., Hinderer, S., Schenke-Layland, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Skin+tissue+engineering+-+In+vivo+and+in+vitro+applications.">Skin tissue engineering - In vivo and in vitro applications.</a> Adv Drug Deliv Rev. 63 (4-5), 352-366 (2011).</li><li>Kushner, A. M., Guan, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modular+Design+in+Natural+and+Biomimetic+Soft+Materials.">Modular Design in Natural and Biomimetic Soft Materials.</a> Angewandte Chemie International Edition. 50 (39), 9026-9057 (2011).</li><li>Gagner, J. E., Kim, W., Chaikof, E. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Designing+protein-based+biomaterials+for+medical+applications.">Designing protein-based biomaterials for medical applications.</a> Acta Biomater. 10 (4), 1542-1557 (2014).</li><li>Gomes, S., Leonor, I. B., Mano, J. F., Reis, R. L., Kaplan, D. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Natural+and+genetically+engineered+proteins+for+tissue+engineering.">Natural and genetically engineered proteins for tissue engineering.</a> Prog Polym Sci. 37 (1), 1-17 (2012).</li><li>Werkmeister, J. A., Ramshaw, J. A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recombinant+protein+scaffolds+for+tissue+engineering.">Recombinant protein scaffolds for tissue engineering.</a> Biomedical Materials. 7 (1), 012002 (2012).</li><li>MacNeil, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomaterials+for+tissue+engineering+of+skin.">Biomaterials for tissue engineering of skin.</a> Materials Today. 11 (5), 26-35 (2008).</li><li>Fong, E., Tirrell, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Collective+Cell+Migration+on+Artificial+Extracellular+Matrix+Proteins+Containing+Full-Length+Fibronectin+Domains.">Collective Cell Migration on Artificial Extracellular Matrix Proteins Containing Full-Length Fibronectin Domains.</a> Advanced Materials. 22 (46), 5271-5275 (2010).</li><li>Ratner, B. D., Bryant, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=BIOMATERIALS:+Where+We+Have+Been+and+Where+We+are+Going.">BIOMATERIALS: Where We Have Been and Where We are Going.</a> Annual Review of Biomedical Engineering. 6 (1), 41-75 (2004).</li><li>Cai, L., Heilshorn, S. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Designing+ECM-mimetic+materials+using+protein+engineering.">Designing ECM-mimetic materials using protein engineering.</a> Acta Biomater. 10 (4), 1751-1760 (2014).</li><li>Annabi, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Elastomeric+recombinant+protein-based+biomaterials.">Elastomeric recombinant protein-based biomaterials.</a> Biochemical Engineering Journal. 77, 110-118 (2013).</li><li>Heilshorn, S. C., DiZio, K. A., Welsh, E. R., Tirrell, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endothelial+cell+adhesion+to+the+fibronectin+CS5+domain+in+artificial+extracellular+matrix+proteins.">Endothelial cell adhesion to the fibronectin CS5 domain in artificial extracellular matrix proteins.</a> Biomaterials. 24 (23), 4245-4252 (2003).</li><li>Simnick, A. J., Lim, D. W., Chow, D., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomedical+and+Biotechnological+Applications+of+Elastin-Like+Polypeptides.">Biomedical and Biotechnological Applications of Elastin-Like Polypeptides.</a> Polymer Reviews. 47 (1), 121-154 (2007).</li><li>Tjin, M. S., Chua, A. W. C., Ma, D. R., Lee, S. T., Fong, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Human+Epidermal+Keratinocyte+Cell+Response+on+Integrin-Specific+Artificial+Extracellular+Matrix+Proteins.">Human Epidermal Keratinocyte Cell Response on Integrin-Specific Artificial Extracellular Matrix Proteins.</a> Macromolecular Bioscience. 14 (8), 1125-1134 (2014).</li><li>MacNeil, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Progress+and+opportunities+for+tissue-engineered+skin.">Progress and opportunities for tissue-engineered skin.</a> Nature. 445 (7130), 874-880 (2007).</li><li>Kariya, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differential+regulation+of+cellular+adhesion+and+migration+by+recombinant+laminin-5+forms+with+partial+deletion+or+mutation+within+the+G3+domain+of+&#945;3+chain.">Differential regulation of cellular adhesion and migration by recombinant laminin-5 forms with partial deletion or mutation within the G3 domain of &#945;3 chain.</a> J Cell Biochem. 88 (3), 506-520 (2003).</li><li>Shang, M., Koshikawa, N., Schenk, S., Quaranta, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+LG3+module+of+laminin-5+harbors+a+binding+site+for+integrin+&#945;3&#914;1+that+promotes+cell+adhesion,+spreading,+and+migration.">The LG3 module of laminin-5 harbors a binding site for integrin &#945;3&#914;1 that promotes cell adhesion, spreading, and migration.</a> J Biol Chem. 276 (35), 33045-33053 (2001).</li><li>Hassouneh, W., Christensen, T., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Elastin-like+polypeptides+as+a+purification+tag+for+recombinant+proteins.">Elastin-like polypeptides as a purification tag for recombinant proteins.</a> Current Protocols in Protein Science. , 6.11.1-6.11.16 (2010).</li><li>Keeley, F., Mecham, R., Keeley, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ch.+4.">Ch. 4.</a> Evolution of Extracellular Matrix.Biology of Extracellular Matrix. , 73-119 (2013).</li><li>Le, D. H. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-Assembly+of+Elastin-Mimetic+Double+Hydrophobic+Polypeptides.">Self-Assembly of Elastin-Mimetic Double Hydrophobic Polypeptides.</a> Biomacromolecules. 14 (4), 1028-1034 (2013).</li><li>MacEwan, S. R., Hassouneh, W., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Non-chromatographic+Purification+of+Recombinant+Elastin-like+Polypeptides+and+their+Fusions+with+Peptides+and+Proteins+from+Escherichia+coli.">Non-chromatographic Purification of Recombinant Elastin-like Polypeptides and their Fusions with Peptides and Proteins from Escherichia coli.</a> Journal of visualized experiments: JoVE. (88), e51583 (2014).</li><li>Meyer, D. E., Chilkoti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genetically+encoded+synthesis+of+protein-based+polymers+with+precisely+specified+molecular+weight+and+sequence+by+recursive+directional+ligation:+examples+from+the+elastin-like+polypeptide+system.">Genetically encoded synthesis of protein-based polymers with precisely specified molecular weight and sequence by recursive directional ligation: examples from the elastin-like polypeptide system.</a> Biomacromolecules. 3 (2), 357-367 (2002).</li></ol>

המחברים מצהירים שאין להם אינטרסים כלכליים מתחרים.

הנדסת חלבון רקומביננטי היא טכניקה צדדי כדי ליצור חומרי חלבון רומן באמצעות גישה מלמטה למעלה. יכולים להיות מתוכננים חומרים מבוססי החלבון יש פונקציות מרובות, מותאם בהתאם ליישום של עניין. בשל התקדמות גוברת בטכנולוגיות שיבוט וביטוי חלבון, זה הפך להיות יחסית פשוט (וחסכונ?...

For several decades, both synthetic and natural materials have been explored for use as scaffolds in tissue engineering1,2. While synthetic materials such as polymers offer excellent structural integrity and tunable mechanical properties, they often have insufficient bioactivity to promote growth and infiltration of tissues. On the other hand, natural materials such as extracellular matrix (ECM) proteins have excellent biological activity, but have limitations such as batch-to-batch variability, rapid degradation and immunogenicity issues. As such, recombinant proteins are desired, since they can be designed to mimic only the desirable properties of native proteins3,4.
Recombinant protein engineering has garnered widespread interests as a versatile platform for the design and production of novel artificial protein biopolymers. By controlling the genetic sequence, the functionalities of the artificial proteins can be tailored for a wide variety of applications5,6. In particular, artificial extracellular matrix (aECM) proteins can be tailored to have multiple functionalities for applications in tissue engineering, regeneration and wound repair2,7. More importantly, advances in cloning and purification technologies have increased scalability and reduced the cost of manufacturing recombinant proteins tremendously. It is possible to produce large quantities of recombinant proteins at low production costs which are economic for use in the clinic5. 
Artificial extracellular matrix proteins have been developed for tissue engineering applications8-11. For instance, Tirrell et al. designed a small diameter vascular graft using artificial proteins containing fibronectin CS5 sequence and elastin-like repeats (ELP-CS5). They showed that human umbilical vein endothelial cells (HUVECs) were able to adhere and grow on these materials12. Others have also incorporated short bioactive sequences taken from fibronectin, collagen, laminin, fibrinogen and vitronectin as well as structural domains that mimic elastin, spider silk and collagens to create a variety of fusion proteins10. Bulk cross-linked films made out of elastin-based aECM proteins also exhibited mechanical properties similar to that of native elastin (elastic moduli ranges between 0.3-0.6 MPa)13. Subsequently, aECM proteins containing longer fibronectin fragments were also reported to accelerate wound healing in vitro due to increased integrin binding affinities8. 
Recently, integrin-specific artificial ECM proteins have been developed by Tjin and coworkers14. Each aECM protein contains a bioactive cell-binding domain taken from ECM components of native human skin2,7,15, such as laminin-5, collagen-IV and fibronectin. For example, the integrin &#945;3&#914;1 has been shown to bind the PPFLMLLKGSTR sequence found in the laminin-5 alpha-3 chain globular domain 3 (LG3)16,17. In their report, they showed that primary human skin epidermal keratinocytes preferentially engage different integrins for binding to each of the aECM proteins, depending on the type of cell binding domain present.
The aECM proteins discussed in the work by Tjin et al. contain flanking elastin-like domains {(VPGIG)2VPGKG(VPGIG)2}8 that confer elasticity which mimics the mechanical properties of human skin. In addition, the incorporation of lysine residues within the elastin-like repeats also increases the overall protein solubility in aqueous solvents. In addition, the lysine residues also serve as crosslinking sites to facilitate the formation of crosslinked aECM films12. Inclusion of elastin-like repeats within the aECM protein sequence allow the proteins to be readily purified via Inverse Transition Cycling (ITC)14. Elastins undergo a sharp and reversible phase transition at a specific temperature known as the lower critical solution temperature (LCST) or the inverse transition temperature (Tt)18-20. Elastins and elastin-like repeats adopt hydrophilic random coil conformations below their LCST and become soluble in water, whereas above their LCST, elastins aggregate rapidly into micron-size particles. Such phase transitions are reversible and hence, can be exploited to allow elastin-based aECM proteins to be readily purified via the ITC technique21.
In this work, we report a generalized procedure to design, construct and purify artificial ECM proteins containing bioactive cell-binding domains, fused to elastin-like repeats. The process to design and clone the plasmids that encode for the amino acid sequences for the aECM proteins is described. The steps involved to purify the aECM proteins using ITC are outlined. Finally, the methods to determine the purity of the aECM proteins obtained using SDS-PAGE electrophoresis and Western Blotting are discussed.

<table><tbody><tr><td>pET22b (+)</td><td>Novagen</td><td>69744</td><td>T7 expression vectors with resistance to ampicillin&amp;nbsp;</td></tr><tr><td>BL21(DE3)pLysS&amp;nbsp;</td><td>Invitrogen</td><td>C6060-03</td><td>additional antibiotics - chloramphenicol</td></tr><tr><td>Isopropyl-beta-D-thiogalactoside (IPTG)</td><td>Gold Biotechnology</td><td>I2481C</td><td>1 M stock solution with autoclaved water, make fresh prior to induction.</td></tr><tr><td>QIAprep Spin Miniprep Kit</td><td>Qiagen</td><td>27106</td><td>plasmid isolation kit</td></tr><tr><td>T4 ligase</td><td>New England Biolabs</td><td>M0202S</td><td></td></tr><tr><td>Ampicillin</td><td>Affymetrix</td><td>11259</td><td></td></tr><tr><td>Chloramphenicol</td><td>Affymetrix</td><td>23660</td><td></td></tr><tr><td>Zymoclean&amp;trade; gel DNA recovery kit</td><td>Zymo Research</td><td>D4001</td><td></td></tr><tr><td>XL10-gold strain</td><td>Agilent Technologies</td><td>200315</td><td></td></tr></tbody></table>

design and construction of artificial extracellular matrix (aecm) proteins from escherichia coli for skin tissue engineering

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins that have incorporated functional domains derived from nature (or created de novo) have been reported. In particular, artificial extracellular matrix (aECM) proteins have been developed; these aECM proteins consist of biological domains taken from fibronectin, laminins and collagens and are combined with structural domains including elastin-like repeats, silk and collagen repeats. To date, aECM proteins have been widely investigated for applications in tissue engineering and wound repair. Recently, Tjin and coworkers developed integrin-specific aECM proteins designed for promoting human skin keratinocyte attachment and propagation. In their work, the aECM proteins incorporate cell binding domains taken from fibronectin, laminin-5 and collagen IV, as well as flanking elastin-like repeats. They demonstrated that the aECM proteins developed in their work were promising candidates for use as substrates in artificial skin. Here, we outline the design and construction of such aECM proteins as well as their purification process using the thermo-responsive characteristics of elastin.

בעיצוב חלבוני היתוך המכילים חזרות כמו אלסטין-, חשוב לשמור על תכולת האלסטין כוללת, מספיק חלק גדול של חלבון ההיתוך 18. זו היא להבטיח כי מבנה חלבון ההיתוך שומר מאפיינים כמו אלסטין-, על מנת להשתמש ITC לטיהור. העיצוב והרצפים המתוארים בסעיף זה חלבוני aECM נלקחו במיוחד מהעב?...

Watch this Scientific Journal Video about Design and Construction of Artificial Extracellular Matrix aECM Proteins from Escherichia coli for Skin Tissue Engineering at JoVE.com

Design and Construction of Artificial Extracellular Matrix aECM Proteins from Escherichia coli for Skin Tissue Engineering

Recombinant technologies have enabled material designers to create novel artificial proteins with customized functionalities for tissue engineering applications. For example, artificial extracellular matrix proteins can be designed to incorporate structural and biological domains derived from native ECMs. Here, we describe the construction and purification of aECM proteins containing elastin-like repeats.

עיצוב ובנייה של תאי מטריקס המלאכותי (aECM) חלבונים מ<em&gt; Coli Escherichia</em&gt; להנדסת רקמות עור

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins ...

design-construction-artificial-extracellular-matrix-aecm-proteins

Universidad de Cartagena UDEC

Research

JoVE Journal

Bioengineering

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering

8.8K Views.  Nanyang Technological University. Recombinant technologies have enabled material designers to create novel artificial proteins with customized functionalities for tissue engineering applications. For example, artificial extracellular matrix proteins can be designed to incorporate structural and biological domains derived from native ECMs. Here, we describe the construction and purification of aECM proteins containing elastin-like repeats. 

Video: Design and Construction of Artificial Extracellular Matrix aECM Proteins from Escherichia coli for Skin Tissue Engineering

Tissue Engineering: Construction of a Multicellular 3D Scaffold for the Delivery of Layered Cell Sheets

Many tissues, such as the adult human hearts, are unable to adequately regenerate after damage.2,3 Strategies in tissue engineering propose innovations to assist the body in recovery and repair. For example, TE approaches may be able to attenuate heart remodeling after myocardial infarction (MI) and possibly increase total heart function to a near normal pre-MI level.4 As with any functional tissue, successful regeneration of cardiac tissue involves the proper delivery of multiple cell types with environmental cues favoring integration and survival of the implanted cell/tissue graft. Engineered tissues should address multiple parameters including: soluble signals, cell-to-cell interactions, and matrix materials evaluated as delivery vehicles, their effects on cell survival, material strength, and facilitation of cell-to-tissue organization. Studies employing the direct injection of graft cells only ignore these essential elements.2,5,6 A tissue design combining these ingredients has yet to be developed. Here, we present an example of integrated designs using layering of patterned cell sheets with two distinct types of biological-derived materials containing the target organ cell type and endothelial cells for enhancing new vessels formation in the &#8220;tissue&#8221;. Although these studies focus on the generation of heart-like tissue, this tissue design can be applied to many organs other than heart with minimal design and material changes, and is meant to be an off-the-shelf product for regenerative therapies. The protocol contains five detailed steps. A temperature sensitive Poly(N-isopropylacrylamide) (pNIPAAM) is used to coat tissue culture dishes. Then, tissue specific cells are cultured on the surface of the coated plates/micropattern surfaces to form cell sheets with strong lateral adhesions. Thirdly, a base matrix is created for the tissue by combining porous matrix with neovascular permissive hydrogels and endothelial cells. Finally, the cell sheets are lifted from the pNIPAAM coated dishes and transferred to the base element, making the complete construct.

For creation of highly organized structures of complex tissue, one must assemble multiple material and cell types into an integrated composite. This combinatorial design incorporates organ-specific layered cell sheets with two distinct biologically-derived materials containing a strong fibrous matrix base, and endothelial cells for enhancing new vessels formation.

הנדסת רקמות: בנייה תאית 3D פיגום למשלוח גיליונות סלולריים שכבות

Many tissues, such as the adult human hearts, are unable to adequately regenerate after damage.2,3 Strategies in tissue engineering propose innovations to ...

A Full Skin Defect Model to Evaluate Vascularization of Biomaterials In Vivo

Insufficient vascularization is considered to be one of the main factors limiting the clinical success of tissue-engineered constructs. In order to evaluate new strategies that aim at improving vascularization, reliable methods are required to make the in-growth of new blood vessels into bio-artificial scaffolds visible and quantify the results. Over the past couple of years, our group has introduced a full skin defect model that enables the direct visualization of blood vessels by transillumination and provides the possibility of quantification through digital segmentation. In this model, one surgically creates full skin defects in the back of mice and replaces them with the material tested. Molecules or cells of interest can also be incorporated in such materials to study their potential effect. After an observation time of one&#8217;s own choice, materials are explanted for evaluation. Bilateral wounds provide the possibility of making internal comparisons that minimize artifacts among individuals as well as of decreasing the number of animals needed for the study. In comparison to other approaches, our method offers a simple, reliable and cost effective analysis. We have implemented this model as a routine tool to perform high-resolution screening when testing vascularization of different biomaterials and bio-activation approaches.

A Full Skin Defect Model to Evaluate Vascularization of Biomaterials In Vivo

Vascularization is key to approaches in successful tissue engineering. Therefore, reliable technologies are required to evaluate the development of vascular networks in tissue-constructs. Here we present a simple and cost-effective method to visualize and quantify vascularization in vivo.

עור מלא פגמים דגם להערכת כלי דם של Biomaterials<em&gt; בVivo</em

Insufficient vascularization is considered to be one of the main factors limiting the clinical success of tissue-engineered constructs. In order to ...

Processing of Human Cardiac Tissue Toward Extracellular Matrix Self-assembling Hydrogel for In Vitro and In Vivo Applications

Acellular extracellular matrix preparations are useful for studying cell-matrix interactions and facilitate regenerative cell therapy applications. Several commercial extracellular matrix products are available as hydrogels or membranes, but these do not possess tissue-specific biological activity. Because perfusion decellularization is usually not possible with human heart tissue, we developed a 3-step immersion decellularization process. Human myocardial slices procured during surgery are first treated with detergent-free hyperosmolar lysis buffer, followed by incubation with the ionic detergent, sodium dodecyl sulfate, and the process is completed by exploiting the intrinsic DNase activity of fetal bovine serum. This technique results in cell-free sheets of cardiac extracellular matrix with largely preserved fibrous tissue architecture and biopolymer composition, which were shown to provide specific environmental cues to cardiac cell populations and pluripotent stem cells. Cardiac extracellular matrix sheets can then be further processed into a microparticle powder without further chemical modification, or, via short-term pepsin digestion, into a self-assembling cardiac extracellular matrix hydrogel with preserved bioactivity.

Processing of Human Cardiac Tissue Toward Extracellular Matrix Self-assembling Hydrogel for In Vitro and In Vivo Applications

This protocol describes the complete decellularization of human myocardium while preserving its extracellular matrix components. Further processing of the extracellular matrix results in the production of microparticles and a cytoprotective self-assembling hydrogel.

עיבוד של רקמת הלב האנושי כלפי עצמי בהרכבת הידרוג במבחנה ויישומים In Vivo מטריצה חוץ-תאית

Acellular extracellular matrix preparations are useful for studying cell-matrix interactions and facilitate regenerative cell therapy applications. ...

Developmental Biology

Engineering 3D Cellularized Collagen Gels for Vascular Tissue Regeneration

Synthetic materials are known to initiate clinical complications such as inflammation, stenosis, and infections when implanted as vascular substitutes. Collagen has been extensively used for a wide range of biomedical applications and is considered a valid alternative to synthetic materials due to its inherent biocompatibility (i.e., low antigenicity, inflammation, and cytotoxic responses). However, the limited mechanical properties and the related low hand-ability of collagen gels have hampered their use as scaffold materials for vascular tissue engineering. Therefore, the rationale behind this work was first to engineer cellularized collagen gels into a tubular-shaped geometry and second to enhance smooth muscle cells driven reorganization of collagen matrix to obtain tissues stiff enough to be handled.
The strategy described here is based on the direct assembling of collagen and smooth muscle cells (construct) in a 3D cylindrical geometry with the use of a molding technique. This process requires a maturation period, during which the constructs are cultured in a bioreactor under static conditions (without applied external dynamic mechanical constraints) for 1 or 2 weeks. The &#8220;static bioreactor&#8221; provides a monitored and controlled sterile environment (pH, temperature, gas exchange, nutrient supply and waste removal) to the constructs. During culture period, thickness measurements were performed to evaluate the cells-driven remodeling of the collagen matrix, and glucose consumption and lactate production rates were measured to monitor the cells metabolic activity. Finally, mechanical and viscoelastic properties were assessed for the resulting tubular constructs. To this end, specific protocols and a focused know-how (manipulation, gripping, working in hydrated environment, and so on) were developed to characterize the engineered tissues.

In this work, we present a technique for the rapid fabrication of living vascular tissues by direct culturing of collagen, smooth muscle cells and endothelial cells. In addition, a new protocol for the mechanical characterization of engineered vascular tissues is described.

הנדסת ג&#39;ל קולגן Cellularized 3D לשחזור רקמות וכלי דם

Synthetic materials are known to initiate clinical complications such as inflammation, stenosis, and infections when implanted as vascular substitutes. ...

Improving 2D and 3D Skin In Vitro Models Using Macromolecular Crowding

The glycoprotein family of collagens represents the main structural proteins in the human body, and are key components of biomaterials used in modern tissue engineering. A technical bottleneck is the deposition of collagen in vitro, as it is notoriously slow, resulting in sub-optimal formation of connective tissue and subsequent tissue cohesion, particularly in skin models. Here, we describe a method which involves the addition of differentially-sized sucrose co-polymers to skin cultures to generate macromolecular crowding (MMC), which results in a dramatic enhancement of collagen deposition. Particularly, dermal fibroblasts deposited a significant amount of collagen I/IV/VII and fibronectin under MMC in comparison to controls.
The protocol also describes a method to decellularize crowded cell layers, exposing significant amounts of extracellular matrix (ECM) which were retained on the culture surface as evidenced by immunocytochemistry. Total matrix mass and distribution pattern was studied using interference reflection microscopy. Interestingly, fibroblasts, keratinocytes and co-cultures produced cell-derived matrices (CDM) of varying composition and morphology. CDM could be used as &#34;bio-scaffolds&#34; for secondary cell seeding, where the current use of coatings or scaffolds, typically from xenogenic animal sources, can be avoided, thus moving towards more clinically relevant applications.
In addition, this protocol describes the application of MMC during the submerged phase of a 3D-organotypic skin co-culture model which was sufficient to enhance ECM deposition in the dermo-epidermal junction (DEJ), in particular, collagen VII, the major component of anchoring fibrils. Electron microscopy confirmed the presence of anchoring fibrils in cultures developed with MMC, as compared to controls. This is significant as anchoring fibrils tether the dermis to the epidermis, hence, having a pre-formed mature DEJ may benefit skin graft recipients in terms of graft stability and overall wound healing. Furthermore, culture time was condensed from 5 weeks to 3 weeks to obtain a mature construct, when using MMC, reducing costs.

Improving 2D and 3D Skin In Vitro Models Using Macromolecular Crowding

We present a protocol to obtain cell-derived matrices rich in extracellular matrix proteins, using macromolecular crowders (MMC). In addition, we present a protocol which incorporates MMC in 3D organotypic skin co-culture generation, which reduces culture time while maintaining maturity of construct.

עור 2D and 3D שיפור<em&gt; במבחנה</em&gt; מודלים שימוש להצטופפות מולקולארית

The glycoprotein family of collagens represents the main structural proteins in the human body, and are key components of biomaterials used in modern ...

Engineering Three-dimensional Epithelial Tissues Embedded within Extracellular Matrix

The architecture of branched organs such as the lungs, kidneys, and mammary glands arises through the developmental process of branching morphogenesis, which is regulated by a variety of soluble and physical signals in the microenvironment. Described here is a method created to study the process of branching morphogenesis by forming engineered three-dimensional (3D) epithelial tissues of defined shape and size that are completely embedded within an extracellular matrix (ECM). This method enables the formation of arrays of identical tissues and enables the control of a variety of environmental factors, including tissue geometry, spacing, and ECM composition. This method can also be combined with widely used techniques such as traction force microscopy (TFM) to gain more information about the interactions between cells and their surrounding ECM. The protocol can be used to investigate a variety of cell and tissue processes beyond branching morphogenesis, including cancer invasion.

This manuscript describes a soft lithography-based technique to engineer uniform arrays of three-dimensional (3D) epithelial tissues of defined geometry surrounded by extracellular matrix. This method is amenable to a wide variety of cell types and experimental contexts and allows for high-throughput screening of identical replicates.

הנדסה תלת מימדי רקמות אפיתל Embedded בתוך מטריקס

The architecture of branched organs such as the lungs, kidneys, and mammary glands arises through the developmental process of branching morphogenesis, ...

Production of Elastin-like Protein Hydrogels for Encapsulation and Immunostaining of Cells in 3D

Two-dimensional (2D) tissue culture techniques have been essential for our understanding of fundamental cell biology. However, traditional 2D tissue culture systems lack a three-dimensional (3D) matrix, resulting in a significant disconnect between results collected in vitro and in vivo. To address this limitation, researchers have engineered 3D hydrogel tissue culture platforms that can mimic the biochemical and biophysical properties of the in vivo cell microenvironment. This research has motivated the need to develop material platforms that support 3D cell encapsulation and downstream biochemical assays. Recombinant protein engineering offers a unique toolset for 3D hydrogel material design and development by allowing for the specific control of protein sequence and therefore, by extension, the potential mechanical and biochemical properties of the resultant matrix. Here, we present a protocol for the expression of recombinantly-derived elastin-like protein (ELP), which can be used to form hydrogels with independently tunable mechanical properties and cell-adhesive ligand concentration. We further present a methodology for cell encapsulation within ELP hydrogels and subsequent immunofluorescent staining of embedded cells for downstream analysis and quantification.

Recombinant protein-engineered hydrogels are advantageous for 3D cell culture as they allow for complete tunability of the polymer backbone and therefore, the cell microenvironment. Here, we describe the process of recombinant elastin-like protein purification and its application in 3D hydrogel cell encapsulation.

הייצור של חלבון כמו אלסטין Hydrogels כימוס, Immunostaining של תאים ב- 3D

Two-dimensional (2D) tissue culture techniques have been essential for our understanding of fundamental cell biology. However, traditional 2D tissue ...

Production of Extracellular Matrix Fibers via Sacrificial Hollow Fiber Membrane Cell Culture

Engineered scaffolds derived from extracellular matrix (ECM) have driven significant interest in medicine for their potential in expediting wound closure and healing. Extraction of extracellular matrix from fibrogenic cell cultures in vitro has potential for generation of ECM from human- and potentially patient-specific cell lines, minimizing the presence of xenogeneic epitopes which has hindered the clinical success of some existing ECM products. A significant challenge in in vitro production of ECM suitable for implantation is that ECM production by cell culture is typically of relatively low yield. In this work, protocols are described for the production of ECM by cells cultured within sacrificial hollow fiber membrane scaffolds. Hollow fiber membranes are cultured with fibroblast cell lines in a conventional cell medium and dissolved after cell culture to yield continuous threads of ECM. The resulting ECM fibers produced by this method can be decellularized and lyophilized, rendering it suitable for storage and implantation.

The goal of this protocol is production of whole extracellular matrix fibers targeted for wound repair which are suitable for preclinical evaluation as part of a regenerative scaffold implant. These fibers are produced by the culture of fibroblasts on hollow fiber membranes and extracted by dissolution of the membranes.

ייצור סיבים מטריצה חוץ-תאית באמצעות תרבית תאים הממברנה ההקרבה הולופייבר

Engineered scaffolds derived from extracellular matrix (ECM) have driven significant interest in medicine for their potential in expediting wound closure ...

Generation of Self-assembled Vascularized Human Skin Equivalents

Human skin equivalents (HSEs) are tissue engineered constructs that model epidermal and dermal components of human skin. These models have been used to study skin development, wound healing, and grafting techniques. Many HSEs continue to lack vasculature and are additionally analyzed through post-culture histological sectioning which limits volumetric assessment of the structure. Presented here is a straightforward protocol utilizing accessible materials to generate vascularized human skin equivalents (VHSE); further described are volumetric imaging and quantification techniques of these constructs. Briefly, VHSEs are constructed in 12 well culture inserts in which dermal and epidermal cells are seeded into rat tail collagen type I gel. The dermal compartment is made up of fibroblast and endothelial cells dispersed throughout collagen gel. The epidermal compartment is made up of keratinocytes (skin epithelial cells) that differentiate at the air-liquid interface. Importantly, these methods are customizable based on needs of the researcher, with results demonstrating VHSE generation with two different fibroblast cell types: human dermal fibroblasts (hDF) and human lung fibroblasts (IMR90s). VHSEs were developed, imaged through confocal microscopy, and volumetrically analyzed using computational software at 4- and 8-week timepoints. An optimized process to fix, stain, image, and clear VHSEs for volumetric examination is described. This comprehensive model, imaging, and analysis techniques are readily customizable to the specific research needs of individual labs with or without prior HSE experience.

The goal of this protocol is to describe the generation and volumetric analysis of vascularized human skin equivalents using accessible and simple techniques for long term culture. To the extent possible, the rationale for steps is described to allow researchers the ability to customize based on their research needs.

דור של שווה ערך לעור אנושי בהרכבה עצמית

Human skin equivalents (HSEs) are tissue engineered constructs that model epidermal and dermal components of human skin. These models have been used to ...

<meta charset="utf8"></head><body>מודלים תלת-ממדיים יעילים לעיצוב עור ליישום מחקר גמיש

Building Up Skin Models for Numerous Applications - from Two-Dimensional (2D) Monoculture to Three-Dimensional (3D) Multiculture

Due to the complex structure and important functions of the skin, it is an interesting research model for the cosmetic, pharmaceutical, and medical industries. In the European Union, there has been a total ban on testing cosmetic products and their ingredients on animals. In the case of medicine and pharmaceuticals, this possibility is also constantly limited. In accordance with the 3Rs principle, it is becoming more and more common to test individual compounds as well as entire formulations on artificially created models. The cheapest and most widely used are the 2D models, which consist of a cell monolayer but do not reflect the real interactions between the cells in the tissue. Although the commercially available 3D models provide a better representation of the tissue, they are not used on a large scale. This is because they are expensive, the waiting time is quite long, and the available models are frequently limited to only those typically used. 
In order to move the conducted research to a higher level, we have optimized the procedures of various 3D skin model preparations. The described procedures are cheap and simple to prepare as they can be applied in numerous laboratories and by researchers with different experiences in cell culture.

<meta charset="utf8"></head><body>מחבר זרקור: שיפור מגוון דגמי העור באמצעות מודלים סלולריים תלת-ממדיים חסכוניים

Here, we present inexpensive and simple procedures to introduce various 3D skin models for routine research in a cell culture laboratory. Researchers can create models tailored to their needs without relying on commercially available models.

בניית מודלים לעור עבור יישומים רבים - החל ממונוקולטורה דו-ממדית (2D) ועד רב-תרבותיות תלת-ממדית (3D)

Due to the complex structure and important functions of the skin, it is an interesting research model for the cosmetic, pharmaceutical, and medical ...

עיצוב ובנייה של תאי מטריקס המלאכותי (aECM) חלבונים מ

Summary

Explore More Videos

Chapters in this video