Este trabajo fue financiado en parte por el Fondo de Texas Emerging Technology (inicio a la tuberculosis), el Programa de Mejora de Texas State University Research, el Texas State University Doctorado Becas de Investigación (al TC), la Asociación de la NSF para la Investigación y Educación en Materiales (PREM, DMR-1205670), la Fundación Welch (AI-0045), y los Institutos Nacionales de Salud (R01CA032132).

<ol>
	<li>Irvin, J., Irvin, D., Stenger-Smith, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrically+active+polymers+for+use+in+batteries+and+supercapacitors.">Electrically active polymers for use in batteries and supercapacitors.</a> Handbook of Conducting Polymers. , (2007).</li><li>Amb, C. M., Dyer, A. L., Reynolds, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Navigating+the+color+palette+of+solution-processable+electrochromic+polymers.">Navigating the color palette of solution-processable electrochromic polymers.</a> Chemistry of Materials. 23 (3), 397-415 (2011).</li><li>Beaujuge, P. M., Reynolds, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Color+control+in+pi-conjugated+organic+polymers+for+use+in+electrochromic+devices.">Color control in pi-conjugated organic polymers for use in electrochromic devices.</a> Chemical Reviews. 110 (1), 268-320 (2010).</li><li>Ananthakrishnan, N., Padmanaban, G., Ramakrishnan, S., Reynolds, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tuning+polymer+light-emitting+device+emission+colors+in+ternary+blends+composed+of+conjugated+and+nonconjugated+polymers.">Tuning polymer light-emitting device emission colors in ternary blends composed of conjugated and nonconjugated polymers.</a> Macromolecules. 38 (18), 7660-7669 (2005).</li><li>Zhu, Y., Otley, M. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neutral+color+tuning+of+polymer+electrochromic+devices+using+an+organic+dye.">Neutral color tuning of polymer electrochromic devices using an organic dye.</a> Chemical Communications, Cambridge, England. 50 (60), 8167-8170 (2014).</li><li>Kline, W. M., Lorenzini, R. G., Sotzing, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+of+organic+electrochromic+fabric+devices.">A review of organic electrochromic fabric devices.</a> Coloration Technology. 130 (2), 73-80 (2014).</li><li>Gerard, M., Chaubey, A., Malhotra, B. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Application+of+conducting+polymer+to+biosensors.">Application of conducting polymer to biosensors.</a> Biosensors &amp; Bioeletronics. 17, 345-359 (2002).</li><li>Abidian, M. R., Kim, D. -. H., Martin, D. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conducting-polymer+nanotubes+for+controlled+drug+release.">Conducting-polymer nanotubes for controlled drug release.</a> Advanced materials. 18 (4), 405-409 (2006).</li><li>Ge, D., Qi, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+self-powered+and+thermally-responsive+drug+delivery+system+based+on+conducting+polymers.">A self-powered and thermally-responsive drug delivery system based on conducting polymers.</a> Electrochemistry Communications. 12 (8), 1087-1090 (2010).</li><li>George, P. M., LaVan, D. A., Burdick, J. A., Chen, C. -. Y., Liang, E., Langer, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrically+controlled+drug+delivery+from+biotin-doped+conductive+polypyrrole.">Electrically controlled drug delivery from biotin-doped conductive polypyrrole.</a> Advanced Materials. 18 (5), 577-581 (2006).</li><li>Li, Y., Neoh, K. G., Kang, E. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlled+release+of+heparin+from+polypyrrole-poly(vinyl+alcohol)+assembly+by+electrical+stimulation.">Controlled release of heparin from polypyrrole-poly(vinyl alcohol) assembly by electrical stimulation.</a> Journal of biomedical materials research. Part A. 73 (2), 171-181 (2005).</li><li>Svirskis, D., Travas-Sejdic, J., Rodgers, A., Garg, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemically+controlled+drug+delivery+based+on+intrinsically+conducting+polymers.">Electrochemically controlled drug delivery based on intrinsically conducting polymers.</a> Journal of controlled release: official journal of the Controlled Release Society. 146 (1), 6-15 (2010).</li><li>Cheng, L., Yang, K., Chen, Q., Liu, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Organic+stealth+nanoparticles+for+highly+effective+in+vivo+near-infrared+photothermal+therapy+of+cancer.">Organic stealth nanoparticles for highly effective in vivo near-infrared photothermal therapy of cancer.</a> ACS Nano. 6 (6), 5605-5613 (2012).</li><li>Chougule, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+characterization+of+polypyrrole+(PPy)+thin+films.">Synthesis and characterization of polypyrrole (PPy) thin films.</a> Soft Nanoscience Letters. 01 (01), 6-10 (2011).</li><li>Yang, K., Xu, H., Cheng, L., Sun, C., Wang, J., Liu, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+and+in+vivo+near-infrared+photothermal+therapy+of+cancer+using+polypyrrole+organic+nanoparticles.">In vitro and in vivo near-infrared photothermal therapy of cancer using polypyrrole organic nanoparticles.</a> Advanced materials. 24 (41), 5586-5592 (2012).</li><li>Diniz, S. N., Sosnik, A., Mu, H., Valduga, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanobiotechnology.">Nanobiotechnology.</a> BioMed research international. 2013, (2013).</li><li>Weissleder, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Clearer+Vision+for+in+vivo+Imaging.">A Clearer Vision for in vivo Imaging.</a> Nature Biotechnology. , (2001).</li><li>Irvin, J., Reynolds, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low-oxidation-potential+conducting+polymer:+alternating+substituted+para-phenylene+and+3,4-ethylenedioxythiophene+repeat+units.">Low-oxidation-potential conducting polymer: alternating substituted para-phenylene and 3,4-ethylenedioxythiophene repeat units.</a> Polymer. 39 (11), 2339-2347 (1998).</li><li>Yang, Y., Oldenhius, N., Buchwald, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mild+and+general+condition+for+Negishi+cross-coupling+enabled+by+the+use+of+palladacycle+percatalysts.">Mild and general condition for Negishi cross-coupling enabled by the use of palladacycle percatalysts.</a> Angew Chem. 29 (6), 997-1003 (2012).</li><li>Negishi, E., Hu, Q., Huang, Z., Qian, M., Wang, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Negishi+Coupling:+an+update:+Enantiopure+sulfoxides+and+sulfinamides.+New+products+from+Aldrich+R+&amp;+D.">The Negishi Coupling: an update: Enantiopure sulfoxides and sulfinamides. New products from Aldrich R &amp; D.</a> Aldrichchimica Acta. 38 (3), (2005).</li><li>Bilati, U., All&#233;mann, E., Doelker, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+nanoprecipitation+method+intended+for+the+entrapment+of+hydrophilic+drugs+into+nanoparticles.">Development of a nanoprecipitation method intended for the entrapment of hydrophilic drugs into nanoparticles.</a> European Journal of Pharmaceutical Sciences. 24 (1), 67-75 (2005).</li><li>Nagavarma, B. V. N., Yadav, H. K. S., Ayaz, A., Vasudha, L. S., Shivakumar, H. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Different+techniques+for+preparation+of+polymeric+nanopaticles-A+review.">Different techniques for preparation of polymeric nanopaticles-A review.</a> Asian Journal of Pharaceutical and Clinical Research. 5 (3), 16-23 (2012).</li><li>Vaitkuviene, A., Kaseta, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+cytotoxicity+of+polypyrrole+nanoparticles+synthesized+by+oxidative+polymerization.">Evaluation of cytotoxicity of polypyrrole nanoparticles synthesized by oxidative polymerization.</a> Journal of Hazardous Materials. 250-251, 167-174 (2013).</li><li>Han, Y. K., Yih, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Facile+synthesis+of+aqueous-dispersible+nano-PEDOT:PSS-co-MA+core/shell+colloids+through+spray+emulsion+polymerization.">Facile synthesis of aqueous-dispersible nano-PEDOT:PSS-co-MA core/shell colloids through spray emulsion polymerization.</a> Macromolecular Chemistry and Physics. 212 (4), 361-366 (2011).</li><li>Winkel, K. L., Carberry, J. R., Irvin, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+electropolymerization+of+3,5-bis-(3,4-ethylenedioxythien-2-yl)-4,4-dimethyl+isopyrazole:+A+donor-acceptor-donor+monomer.">Synthesis and electropolymerization of 3,5-bis-(3,4-ethylenedioxythien-2-yl)-4,4-dimethyl isopyrazole: A donor-acceptor-donor monomer.</a> Journal of the Electrochemical Society. 160 (8), G111-G116 (2013).</li><li>Hoye, T., Eklov, B., Voloshin, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=No-D+NMR+spectroscopy+as+a+convenient+method+for+titering.">No-D NMR spectroscopy as a convenient method for titering.</a> Organic Letters. 6 (15), 2567-2570 (2004).</li><li>Umezawa, K., Oshima, T., Yoshizawa-Fujita, M., Takeoka, Y., Rikukawa, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+hydrophilic-hydrophobic+block+copolymer+ionomers+based+on+polyphenylenes.">Synthesis of hydrophilic-hydrophobic block copolymer ionomers based on polyphenylenes.</a> ACS Macro Letters. 1 (8), 969-972 (2012).</li><li>Tao, Z., Fan, H., Zhou, J., Jin, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conjugated+polyelectrolyte+with+pendant+caboxylate+groups:+synthesis,+photophysics,+and+pH+responses+in+the+presence+of+surfactants.">Conjugated polyelectrolyte with pendant caboxylate groups: synthesis, photophysics, and pH responses in the presence of surfactants.</a> Journal of Polymer Science Part A-Polymer Chemistry. 46 (3), 830-843 (2008).</li><li>Winkel, K. L., Carberry, J. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Donor-acceptor-donor+polymers+utilizing+pyrimidine-based+acceptors.">Donor-acceptor-donor polymers utilizing pyrimidine-based acceptors.</a> Reactive &amp; Functional Polymers. 83, 113-122 (2014).</li><li>Kr&#242;l, E., Scheffers, D. -. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=FtsZ+polymerization+assays:+simple+protocols+and+considerations.">FtsZ polymerization assays: simple protocols and considerations.</a> Journal of Visualized Experiments : JoVE. (81), e50844 (2013).</li><li>Zolnik, B., Potter, T. M., Stern, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Zeta+potential+measurement.">Zeta potential measurement.</a> Methods in Molecular Biology. 697, 173-179 (2011).</li><li>Nogi, K., Naito, M., Yokoyama, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Nanoparticle technology handbook. , (2012).</li><li>Pattani, V. P., Tunnell, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoparticle-mediated+photothermal+therapy:+A+comparative+study+of+heating+for+different+particle+types.">Nanoparticle-mediated photothermal therapy: A comparative study of heating for different particle types.</a> Lasers in Surgery and Medicine. 44 (8), 675-684 (2012).</li><li>Subianto, S., Will, G. D., Kokot, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Templated+electropolymerization+of+pyrrole+in+a+capillary.">Templated electropolymerization of pyrrole in a capillary.</a> Journal of Polymer Science, Part A: Polymer Chemistry. 41 (12), 1867-1869 (2003).</li><li>Sgouras, D., Duncan, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Methods+for+the+evaluation+of+biocompatibility+of+soluble+synthetic+polymers+which+have+potential+for+biomedical+use:+use+of+the+tetrazolium-based+colorimetric+assay+(MTT)+as+a+preliminary+screen+for+evaluation+of+in+vitro+cytotoxicity.">Methods for the evaluation of biocompatibility of soluble synthetic polymers which have potential for biomedical use: use of the tetrazolium-based colorimetric assay (MTT) as a preliminary screen for evaluation of in vitro cytotoxicity.</a> Journal of Materials Science: Materials in Medicine. 1 (2), 61-68 (1990).</li><li>Ahmadian, S., Barar, J., Saei, A. A., Fakhree, M. A. A., Omidi, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellular+toxicity+of+nanogenomedicine+in+MCF-7+cell+line:+MTT+assay.">Cellular toxicity of nanogenomedicine in MCF-7 cell line: MTT assay.</a> Journal of Visualized Experiments : JoVE. (26), (2009).</li><li>Huang, X., Kang, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+study+of+photothermolysis+of+cancer+cells+with+nuclear-targeted+or+cytoplasm-targeted+gold+nanospheres:+continuous+wave+or+pulsed+lasers.">Comparative study of photothermolysis of cancer cells with nuclear-targeted or cytoplasm-targeted gold nanospheres: continuous wave or pulsed lasers.</a> Journal of Biomedical Optics. 15 (5), 058002 (2015).</li></ol>

The authors have nothing to disclose.

En este trabajo, los PN de polímeros electroactivos se han sintetizado como agentes potenciales de PTT para el tratamiento del cáncer. La preparación de los NPs se describe, a partir de la síntesis de los monómeros seguido por polimerización en emulsión. Mientras que la preparación de NPs utilizando polímeros electroactivos tales como EDOT y pirrol se ha descrito antes, este documento describe la preparación de NPs poliméricos a partir de monómeros de conjugación extendidos únicos, lo que demuestra que est...

Polímeros electroactivos cambian sus propiedades (color, conductividad, reactividad, volumen, etc.) en presencia de un campo eléctrico. Los tiempos de conmutación rápidos, tunability, la durabilidad, y las características de peso ligero de polímeros electroactivos han dado lugar a muchas aplicaciones propuestas, incluida la energía alternativa, sensores, Electrochromics, y dispositivos biomédicos. Polímeros electroactivos son potencialmente útiles como, baterías y condensadores electrodos ligeros flexibles. 1 Aplicaciones de polímeros electroactivos en dispositivos electrocrómicos incluyen sistemas de reducción de deslumbramiento para edificios y automóviles, gafas de sol, gafas de protección, dispositivos de almacenamiento ópticos y textiles inteligentes. 2.5 ventanas inteligentes pueden reducir los requerimientos de energía mediante el bloqueo de determinadas longitudes de onda de la luz a la carta y la protección de los interiores de las casas y automóviles. Textiles inteligentes pueden ser utilizados en la ropa para ayudar a proteger contra la radiación UV. 6 polímeros electroactivos tienen als,o comenzado a ser utilizado en dispositivos médicos. Entre los polímeros electroactivos utilizados en dispositivos biomédicos, polipirrol (PPy), polianilina (PANI), y poli (3,4-etilenodioxitiofeno) (PEDOT) se encuentran entre los más comunes. Por ejemplo, estos tipos de polímeros se utilizan comúnmente como transductores en dispositivos biosensores 7 Aplicaciones en la entrega terapéutico también se han mostrado prometedores.; estudios han demostrado la liberación de los fármacos y proteínas terapéuticas de los dispositivos preparados a partir de polímeros electroactivos 8-12. Más recientemente, polímeros electroactivos se han utilizado como agentes terapéuticos en la terapia fototérmica 13-15. En la terapia fototérmica, agentes fototérmicos deben absorber la luz en el Cercano infrarrojo de (NIR) región (~ de 700-900 nm), también conocida como la ventana terapéutica, donde la luz tiene la profundidad máxima de penetración en el tejido, típicamente de hasta 1 cm. 16,17 En este rango, cromóforos biológicos tales como la hemoglobina , la hemoglobina oxigenada, lípidos y agua tienen poco que-noabsorbancia, que permite que la luz penetre fácilmente. Cuando los agentes fototérmicos absorben la luz en esta ventana terapéutica, la foto energético se convierte en energía fototérmica. Irvin y colaboradores han informado anteriormente alcoxi-monómeros sustituidos de benceno bis-Edot que se sintetizaron usando un acoplamiento de Negishi. 18 de acoplamiento de Negishi es un método preferido para la formación de enlaces carbono-carbono. Este proceso tiene muchas ventajas, incluyendo el uso de productos intermedios organometálicos de cinc, que son menos tóxicos y tienden a tener mayor reactividad que otros compuestos organometálicos utilizados. 19,20 compuestos orgánico de zinc también son compatibles con una amplia gama de grupos funcionales en los organohaluros. 20 En el reacción de acoplamiento de Negishi, un organohaluro y organometálico están acoplados mediante el uso de un catalizador de paladio (0) catalizador. 20 En el trabajo presentado en el presente documento, este método de acoplamiento cruzado se utiliza en la síntesis de 1,4-dialcoxi-2,5-bis ( 3,4-ethylenedioxythienyl) benzemonómeros ne (2 Bedot-B (OR)). Estos monómeros pueden ser fácilmente polimerizan electroquímicamente o químicamente para producir polímeros que son candidatos prometedores para su uso en aplicaciones biomédicas. Los métodos convencionales para la preparación de suspensiones poliméricas coloidales en soluciones acuosas para aplicaciones biomédicas implican típicamente la disolución de polímeros a granel seguido por nanoprecipitation o emulsión técnicas de evaporación de disolvente. 21,22 A fin de producir NPs de poli (Bedot-B (OR) 2) , un enfoque de abajo hacia arriba se demuestra aquí, donde los PN se sintetizan a través de polimerización en emulsión situ. La polimerización en emulsión es un proceso que es fácilmente escalable y es un método relativamente rápido para la preparación de NP. 22 Los estudios que utilizan la polimerización en emulsión para producir NPs de otros polímeros electroactivos se han reportado para PPy y PEDOT. 15,23,24 PEDOT NPs, por ejemplo, se han preparado utilizando emulsión de aerosol polymerization. 24 Este método es difícil de reproducir, y por lo general produce, partículas de tamaño micrométrico más grandes. El protocolo se describe en este artículo explora el uso de un método de la gota-sonicación para preparar de forma reproducible 100 nm PN polímero. En este protocolo, los polímeros electroactivos adaptados para absorber la luz en la región NIR similar al poli informó anteriormente (Bedot-B (OR) 2) se sintetizan y caracterizado para demostrar su potencial en dispositivos electrocrómicos y como agentes de PTT. En primer lugar, se describe el protocolo para la síntesis de los monómeros a través de acoplamiento de Negishi. Los monómeros se caracterizan usando espectroscopía de RMN y UV-Vis-NIR. También se describe la preparación de suspensiones coloidales NP a través de polimerización en emulsión oxidativo en medios acuosos. El procedimiento se basa en un proceso de polimerización en emulsión de dos etapas descrito previamente por Han et al. Que se aplica a los diferentes monómeros. Un sistema de dos tensioactivo esutilizado para controlar el monodispersidad NP. Un ensayo de viabilidad celular se utiliza para evaluar citocompatibilidad de los NPs. Por último, el potencial de estas NPs para actuar como transductores de PTT se demuestra por la irradiación con un láser NIR.

<table><tbody><tr><td>2 mm diameter platinum working electrode</td><td>CH Instruments</td><td>CH102</td><td>Polished using very fine sandpaper</td></tr><tr><td>3,4-ethylenedioxythiophene</td><td>Sigma-Aldrich</td><td>483028</td><td>Purified by vacuum distillation</td></tr><tr><td>3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) 98%</td><td>Alfa Aesar</td><td>L11939</td><td></td></tr><tr><td>505 Sonic Dismembrator</td><td>Fisher Scientific&amp;trade;&amp;nbsp;</td><td>FB505110</td><td>1/8&amp;ldquo; tip and rated at 500&amp;nbsp;watts</td></tr><tr><td>808 nm laser diode</td><td>ThorLabs</td><td>L808P1WJ</td><td>Rated at 1 W</td></tr><tr><td>Acetonitrile anhydrous 99%</td><td>Acros</td><td>61022-0010</td><td></td></tr><tr><td>Avanti J-26 XPI</td><td>Beckman Coulter</td><td>393127</td><td></td></tr><tr><td>Bromohexane 98%</td><td>MP Biomedicals</td><td>202323</td><td></td></tr><tr><td>Dialysis (100,000) MWCO</td><td>SpectrumLabs</td><td>G235071</td><td></td></tr><tr><td>Dimethyl sulfoxide 99% (DMSO)</td><td>BDH</td><td>BDH1115</td><td></td></tr><tr><td>Dimethylformamide anhydrous (DMF) 99%</td><td>Acros</td><td>326870010</td><td></td></tr><tr><td>Dodecyl benzenesulfonate (DBSA)&amp;nbsp;</td><td>TCI</td><td>D0989</td><td></td></tr><tr><td>Dulbecco&amp;rsquo;s modified eagle medium (DMEM)&amp;nbsp;</td><td>Corning</td><td>10-013 CV</td><td></td></tr><tr><td>EMS 150 TES sputter coater</td><td>Electron Microscopy Sciences</td><td></td><td></td></tr><tr><td>Ethanol (EtOH) 100%</td><td>BDH</td><td>BDH1156</td><td></td></tr><tr><td>ethyl 4-bromobutyrate (98%)</td><td>Acros</td><td>173551000</td><td></td></tr><tr><td>Ethyl acetate 99%</td><td>Fisher</td><td>UN1173</td><td></td></tr><tr><td>Fetal bovine serum (FBS)</td><td>Corning</td><td>35-010-CV</td><td></td></tr><tr><td>Helios NanoLab 400</td><td>FEI</td><td></td><td></td></tr><tr><td>Hexane</td><td>Fisher</td><td>H306-4</td><td></td></tr><tr><td>Hydrochloric acid (HCl)</td><td>Fisher</td><td>A142-212</td><td></td></tr><tr><td>Hydroquinone 99.5%</td><td>Acros</td><td>120915000</td><td></td></tr><tr><td>Hydrozine anhydrous 98%</td><td>Sigma-Aldrich</td><td>215155</td><td></td></tr><tr><td>Indium tin oxide (ITO) coated galss</td><td>Delta Technologies</td><td>CG-41IN-CUV</td><td>4-8 &amp;Omega;/sq</td></tr><tr><td>Iron chloride 97% FeCl&lt;sub&gt;3&lt;/sub&gt;</td><td>Sigma-Aldrich</td><td>157740</td><td></td></tr><tr><td>Magnesium sulfate (MgSO&lt;sub&gt;4&lt;/sub&gt;)</td><td>Fisher</td><td>593295</td><td>Dried at 100 &amp;#176;C</td></tr><tr><td>SKOV-3</td><td>ATCC</td><td>HTB-26</td><td></td></tr><tr><td>Methanol</td><td>BDH</td><td>BHD1135</td><td></td></tr><tr><td>n-Butlithium (2.5 M)&amp;nbsp;</td><td>Sigma-Aldrich</td><td>230707</td><td>Pyrophoric</td></tr><tr><td>Poly(styrenesulfonate-co-malic acid) (PSS-co-MA) 20,000 MW</td><td>Sigma-Aldrich</td><td>434566</td><td></td></tr><tr><td>Potassium carbonate</td><td>Sigma-Aldrich</td><td>209619</td><td>Dried at 100 &amp;#176;C</td></tr><tr><td>Potassium hydroxide</td><td>Alfa Aesar</td><td>A18854</td><td></td></tr><tr><td>Potassium iodide</td><td>Fisher</td><td>P410-100</td><td></td></tr><tr><td>RO-5 stirplate</td><td>IKA-Werke</td><td></td><td></td></tr><tr><td>SC4000 IR camera</td><td>FLIR</td><td></td><td></td></tr><tr><td>Synergy H4 Hybrid Reader</td><td>Biotek</td><td></td><td></td></tr><tr><td>Tetrabutylammonium perchlorate (TBAP) 99%</td><td>Sigma-Aldrich</td><td>3579274</td><td>Purified by recrystallization in ethyl acetate</td></tr><tr><td>Tetrahydrofuran anhydrous (THF) 99%</td><td>Sigma-Aldrich</td><td>401757</td><td></td></tr><tr><td>tetrakis(triphenylphosphine) palladium(0)</td><td>Sigma-Aldrich</td><td>216666</td><td>Moisture sensitive</td></tr><tr><td>Thermomixer</td><td>Eppendorf</td><td></td><td></td></tr><tr><td>USB potentiostat/galvanostat</td><td>WaveNow</td><td>AFTP1</td><td></td></tr><tr><td>Zetasizer Nano Zs</td><td>Malvern</td><td></td><td>Optical Arrangment 175&amp;#176;</td></tr><tr><td>Zinc chloride (1 M) ZnCl&lt;sub&gt;2&lt;/sub&gt;</td><td>Acros</td><td>370057000</td><td></td></tr></tbody></table>

electroactive polymer nanoparticles exhibiting photothermal properties

A method for the synthesis of electroactive polymers is demonstrated, starting with the synthesis of extended conjugation monomers using a three-step process that finishes with Negishi coupling. Negishi coupling is a cross-coupling process in which a chemical precursor is first lithiated, followed by transmetallation with ZnCl2. The resultant organozinc compound can be coupled to a dibrominated aromatic precursor to give the conjugated monomer. Polymer films can be prepared via electropolymerization of the monomer and characterized using cyclic voltammetry and ultraviolet-visible-near infrared (UV-Vis-NIR) spectroscopy. Nanoparticles (NPs) are prepared via emulsion polymerization of the monomer using a two-surfactant system to yield an aqueous dispersion of the polymer NPs. The NPs are characterized using dynamic light scattering, electron microscopy, and UV-Vis-NIR-spectroscopy. Cytocompatibility of NPs is investigated using the cell viability assay. Finally, the NP suspensions are irradiated with a NIR laser to determine their effectiveness as potential materials for photothermal therapy (PTT).

El protocolo de reacción produciendo M1 y M2 se muestra en la Figura 1. Los monómeros se pueden caracterizar por 1 H y 13 C RMN espectroscopía, punto de fusión, y análisis elemental. El espectro de RMN 1H proporciona información sobre la conectividad de los átomos y sus entornos electrónicos; por lo tanto, se utiliza de manera rutinaria para verificar que las reacciones se han completado con éxito. Reacciones de ...

Watch this Scientific Journal Video about Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties at JoVE.com

Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

A protocol is presented for the synthesis and preparation of nanoparticles consisting of electroactive polymers.

Propiedades Electroactivos Polymer Nanopartículas Exponer fototérmica

A method for the synthesis of electroactive polymers is demonstrated, starting with the synthesis of extended conjugation monomers using a three-step ...

electroactive-polymer-nanoparticles-exhibiting-photothermal-properties

Universidad de Cartagena UDEC

Research

JoVE Journal

Engineering

13.7K vistas.  Texas State University. A protocol is presented for the synthesis and preparation of nanoparticles consisting of electroactive polymers. 

Video: Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

A 'Plug and Play' Method to Create Water-dispersible Nanoassemblies Containing an Amphiphilic Polymer, Organic Dyes and Upconverting Nanoparticles

In this protocol, we first describe a procedure to synthesize lanthanide doped upconverting nanoparticles (UCNPs). We then demonstrate how to generate amphiphilic polymers in situ, and describe a protocol to encapsulate the prepared UCNPs and different organic dye molecules (porphyrins and diarylethenes) using polymer shells to form stable water-dispersible nanoassemblies. The nanoassembly samples containing both the UCNPs and the diarylethene organic dyes have interesting photochemical and photophysical properties. Upon 365 nm UV irradiation, the diarylethene group undergoes a visual color change. When the samples are irradiated with visible light of another specific wavelength, the color fades and the samples return to the initial colorless state. The samples also emit visible light from the UCNPs upon irradiation with 980 nm near-infrared light. The emission intensity of the samples can be tuned through alternate irradiation with UV and visible light. Modulation of fluorescence can be performed for many cycles without observable degradation of the samples. This versatile encapsulation procedure allows for the transfer of hydrophobic molecules and nanoparticles from an organic solvent to an aqueous medium. The polymer helps to maintain a lipid-like microenvironment for the organic molecules to aid in preservation of their photochemical behavior in water. Thus this method is ideal to prepare water-dispersible photoresponsive systems. The use of near-infrared light to activate upconverting nanoparticles allows for lower energy light to be used to activate photoreactions instead of more harmful ultraviolet light.

Organic dye molecules and oleic acid coated upconverting nanoparticles are not water-soluble. This protocol describes a &#8216;plug and play&#8217; method that enables the transfer of organic dye molecules and upconverting particles from their initial hydrophobic solvent to water.

Un método &#39;Plug and Play&#39; para crear nanoconjuntos dispersables en agua que contiene un polímero anfífilo, colorantes orgánicos y conversión ascendente Nanopartículas

In this protocol, we first describe a procedure to synthesize lanthanide doped upconverting nanoparticles (UCNPs). We then demonstrate how to generate ...

Investigación

Química

Photodynamic Therapy with Blended Conducting Polymer/Fullerene Nanoparticle Photosensitizers

In this article a method for the fabrication and reproducible in-vitro evaluation of conducting polymer nanoparticles blended with fullerene as the next generation photosensitizers for Photodynamic Therapy (PDT) is reported. The nanoparticles are formed by hydrophobic interaction of the semiconducting polymer MEH-PPV (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) with the fullerene PCBM (phenyl-C61-butyric acid methyl ester) in the presence of a non-compatible solvent. MEH-PPV has a high extinction coefficient that leads to high rates of triplet formation, and efficient charge and energy transfer to the fullerene PCBM. The latter processes enhance the efficiency of the PDT system through fullerene assisted triplet and radical formation, and ultrafast deactivation of MEH-PPV excited stated. The results reported here show that this nanoparticle PDT sensitizing system is highly effective and shows unexpected specificity to cancer cell lines.

This protocol describes a method for the fabrication of conducting polymer nanoparticles blended with fullerene. These nanoparticles were investigated for their potential use as a next generation photosensitizers for Photodynamic Therapy (PDT).

Terapia fotodinámica con Blended polímero conductor / Fullerene nanopartículas fotosensibilizadores

In this article a method for the fabrication and reproducible in-vitro evaluation of conducting polymer nanoparticles blended with fullerene as the next ...

Multifunctional Hybrid Fe2O3-Au Nanoparticles for Efficient Plasmonic Heating

One of the most widely used methods for manufacturing colloidal gold nanospherical particles involves the reduction of chloroauric acid (HAuCl4) to neutral gold Au(0) by reducing agents, such as sodium citrate or sodium borohydride. The extension of this method to decorate iron oxide or similar nanoparticles with gold nanoparticles to create multifunctional hybrid Fe2O3-Au nanoparticles is straightforward. This approach yields fairly good control over Au nanoparticle dimensions and loading onto Fe2O3. Additionally, the Au metal size, shape, and loading can easily be tuned by changing experimental parameters (e.g., reactant concentrations, reducing agents, surfactants, etc.). An advantage of this procedure is that the reaction can be done in air or water, and, in principle, is amenable to scaling up. The use of such optically tunable Fe2O3-Au nanoparticles for hyperthermia studies is an attractive option as it capitalizes on plasmonic heating of gold nanoparticles tuned to absorb light strongly in the VIS-NIR region. In addition to its plasmonic effects, nanoscale Au provides a unique surface for interesting chemistries and catalysis. The Fe2O3 material provides additional functionality due to its magnetic property. For example, an external magnetic field could be used to collect and recycle the hybrid Fe2O3-Au nanoparticles after a catalytic experiment, or alternatively, the magnetic Fe2O3 can be used for hyperthermia studies through magnetic heat induction. The photothermal experiment described in this report measures bulk temperature change and nanoparticle solution mass loss as functions of time using infrared thermocouples and a balance, respectively. The ease of sample preparation and the use of readily available equipment are distinct advantages of this technique. A caveat is that these photothermal measurements assess the bulk solution temperature and not the surface of the nanoparticle where the heat is transduced and the temperature is likely to be higher.

Multifunctional Hybrid Fe2O3-Au Nanoparticles for Efficient Plasmonic Heating

We describe the synthesis and properties of multifunctional Fe2O3-Au nanoparticles produced by a wet chemical approach and investigate their photothermal properties using laser irradiation. The composite Fe2O3-Au nanoparticles retain the properties of both materials, creating a multifunctional structure with excellent magnetic and plasmonic properties.

Multifuncional híbrido Fe<sub&gt; 2</sub&gt; O<sub&gt; 3</sub&gt; -Au Nanopartículas para la calefacción eficiente plasmónicas

One of the most widely used methods for manufacturing colloidal gold nanospherical particles involves the reduction of chloroauric acid (HAuCl4) to ...

Ingeniería

One Minute, Sub-One-Watt Photothermal Tumor Ablation Using Porphysomes, Intrinsic Multifunctional Nanovesicles

We recently developed porphysomes as intrinsically multifunctional nanovesicles. A photosensitizer, pyropheophorbide &alpha;, was conjugated to a phospholipid and then self-assembled to liposome-like spherical vesicles. Due to the extremely high density of porphyrin in the porphyrin-lipid bilayer, porphysomes generated large extinction coefficients, structure-dependent fluorescence self-quenching, and excellent photothermal efficacy. In our formulation, porphysomes were synthesized using high pressure extrusion, and displayed a mean particle size around 120 nm. Twenty-four hr post-intravenous injection of porphysomes, the local temperature of the tumor increased from 30 &deg;C to 62 &deg;C rapidly upon one minute exposure of 750 mW (1.18 W/cm2), 671 nm laser irradiation. Following the complete thermal ablation of the tumor, eschars formed and healed within 2 weeks, while in the control groups the tumors continued to grow and all reached the defined end point within 3 weeks. These data show how porphysomes can be used as potent photothermal therapy (PTT) agents.

We developed novel intrinsic multifunctional nanovesicles called porphysomes, which have structure-dependent fluorescence self-quenching and unique photothermal properties, thus functioning as potent photothermal therapy agents. We formulated porphysomes using high pressure extrusion and investigated their photothermal therapy efficacy in a xenograft tumor model.

Un Minuto, Sub-Uno-Watt fototérmica Ablación Usando Porphysomes, Intrinsic Multifuncional nanovesículas

We recently developed porphysomes as intrinsically multifunctional nanovesicles. A photosensitizer, pyropheophorbide &alpha;, was conjugated to a ...

Bioingeniería

Optical Control of Living Cells Electrical Activity by Conjugated Polymers

Hybrid interfaces between organic semiconductors and living tissues represent a new tool for in-vitro and in-vivo applications. In particular, conjugated polymers display several optimal properties as substrates for biological systems, such as good biocompatibility, excellent mechanical properties, cheap and easy processing technology, and possibility of deposition on light, thin and flexible substrates. These materials have been employed for cellular interfaces like neural probes, transistors for excitation and recording of neural activity, biosensors and actuators for drug release. Recent experiments have also demonstrated the possibility to use conjugated polymers for all-optical modulation of the electrical activity of cells. Several in-vitro study cases have been reported, including primary neuronal networks, astrocytes and secondary line cells. Moreover, signal photo-transduction mediated by organic polymers has been shown to restore light sensitivity in degenerated retinas, suggesting that these devices may be used for artificial retinal prosthesis in the future. All in all, light sensitive conjugated polymers represent a new approach for optical modulation of cellular activity.
In this work, all the steps required to fabricate a bio-polymer interface for optical excitation of living cells are described. The function of the active interface is to transduce the light stimulus into a modulation of the cell membrane potential. As a study case, useful for in-vitro studies, a polythiophene thin film is used as the functional, light absorbing layer, and Human Embryonic Kidney (HEK-293) cells are employed as the biological component of the interface. Practical examples of successful control of the cell membrane potential upon stimulation with light pulses of different duration are provided. In particular, it is shown that both depolarizing and hyperpolarizing effects on the cell membrane can be achieved depending on the duration of the light stimulus. The reported protocol is of general validity and can be straightforwardly extended to other biological preparations.

A method for stimulation of in-vitro cell cultures electrical activity with visible light, based on the use of organic semiconducting polymers is described.

Control óptico de células vivas Actividad Eléctrica por conjugadas Polímeros

Hybrid interfaces between organic semiconductors and living tissues represent a new tool for in-vitro and in-vivo applications. In particular, conjugated ...

Magnetic and Thermal-sensitive Poly(N-isopropylacrylamide)-based Microgels for Magnetically Triggered Controlled Release

Magnetically and thermally sensitive poly(N-isopropylacrylamide) (PNIPAAm)/Fe3O4-NH2 microgels with the encapsulated anti-cancer drug curcumin (Cur) were designed and fabricated for magnetically triggered release. PNIPAAm-based magnetic microgels with a spherical structure were produced via a temperature-induced emulsion followed with physical-crosslinking by mixing PNIPAAm, polyethylenimine (PEI), and Fe3O4-NH2 magnetic nanoparticles. Because of their dispersity, the Fe3O4-NH2 nanoparticles were embedded inside the polymer matrix. The amine groups exposed on the Fe3O4-NH2 and PEI surface supported the spherical structure by physically crosslinking with the amide groups of the PNIPAAm. The hydrophobic anti-cancer drug curcumin can be dispersed in water after encapsulation into the microgels. The microgels were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and UV-Vis spectral analysis. Furthermore, magnetically triggered release was studied under an external high frequency magnetic field (HFMF). A significant &#34;burst release&#34; of curcumin was observed after applying the HFMF to the microgels due to the magnetic inductive heating (hyperthermia) effect. This manuscript describes the magnetically triggered controlled release of Cur-PNIPAAm/Fe3O4-NH2 encapsulated curcumin, which can be potentially applied for tumor therapy.

Magnetic and Thermal-sensitive PolyN-isopropylacrylamide-based Microgels for Magnetically Triggered Controlled Release

This manuscript describes the preparation of magnetic and thermal-sensitive microgels via a temperature-induced emulsion without chemical reaction. These sensitive microgels were synthesized by mixing poly(N-isopropylacrylamide) (PNIPAAm), polyethylenimine (PEI) and Fe3O4-NH2 nanoparticles for the potential use in magnetically and thermally triggered drug-release.

Poliuretano Magnético y Térmico<emN</em&gt; -isopropilacrilamida) para liberación controlada magnéticamente

Magnetically and thermally sensitive poly(N-isopropylacrylamide) (PNIPAAm)/Fe3O4-NH2 microgels with the encapsulated anti-cancer drug curcumin (Cur) were ...

Gold Nanorod-assisted Optical Stimulation of Neuronal Cells

Recent studies have demonstrated that nerves can be stimulated in a variety of ways by the transient heating associated with the absorption of infrared light by water in neuronal tissue. This technique holds great potential for replacing or complementing standard stimulation techniques, due to the potential for increased localization of the stimulus and minimization of mechanical contact with the tissue. However, optical approaches are limited by the inability of visible light to penetrate deep into tissues. Moreover, thermal modelling suggests that cumulative heating effects might be potentially hazardous when multiple stimulus sites or high laser repetition rates are used. The protocol outlined below describes an enhanced approach to the infrared stimulation of neuronal cells. The underlying mechanism is based on the transient heating associated with the optical absorption of gold nanorods, which can cause triggering of neuronal cell differentiation and increased levels of intracellular calcium activity. These results demonstrate that nanoparticle absorbers can enhance and/or replace the process of infrared neural stimulation based on water absorption, with potential for future applications in neural prostheses and cell therapies.

This protocol outlines how to use the transient heating associated with the optical absorption of gold nanorods to stimulate differentiation and intracellular calcium activity in neuronal cells. These results potentially open up new applications in neural prostheses and fundamental studies in neuroscience.

Oro nanorod asistida estimulación óptica de las células neuronales

Recent studies have demonstrated that nerves can be stimulated in a variety of ways by the transient heating associated with the absorption of infrared ...

Neurociencias

Síntesis hidrotermal de nanopartículas luminiscentes persistentes

Synthesis of Persistent Luminescent Nanoparticles for Rewritable Displays and Illumination Applications

Persistent luminescent nanoparticles (PLNPs) possess the capabilities to maintain extended longevity and robust emission even after the excitation has ceased. PLNPs have been widely used across various domains, including information displays, data encryption, biological imaging, and artistic decoration with sustained and vivid luminosity, providing boundless possibilities for a variety of innovative technology and artistic projects. This protocol focuses on an experimental procedure for the hydrothermal synthesis of PLNPs. The successful synthesis of enduring luminescent nanomaterials with Mn2+ or Cr3+ serving as a luminescent center in Zn2GeO4: Mn (ZGO: Mn) or ZnGa2O4: Cr highlights the universality of this synthetic method. On the other hand, the optical properties of ZGO: Mn can be changed by adjusting the pH of precursor solutions, demonstrating the tunability of the protocol. When charged with ultraviolet (UV) at a wavelength of 365 nm for 3 min and then stopped, PLNPs exhibit the remarkable capacity to generate afterglow efficiently and consistently, which makes them ideal for making two-dimensional rewritable displays and three-dimensional transparent, luminous artworks. This protocol outlined in this paper provides a feasible method for the synthesis of persistent luminescent nanoparticles for further illumination and imaging applications, opening up novel prospects for the fields of science and art.

Autor destacado: Avance de la bioimagen y la terapia con nanomateriales funcionales

A protocol is presented for the synthesis of persistent luminescent nanomaterials (PLNPs) and their potential applications in rewritable displays and artistic processing utilizing the afterglow effect under ultraviolet light (365 nm) irradiation.

Síntesis de nanopartículas luminiscentes persistentes para pantallas regrabables y aplicaciones de iluminación

Persistent luminescent nanoparticles (PLNPs) possess the capabilities to maintain extended longevity and robust emission even after the excitation has ...

Propiedades Electroactivos Polymer Nanopartículas Exponer fototérmica

Resumen

Explorar más videos

Un método 'Plug and Play' para crear nanoconjuntos dispersables en agua que contiene un polímero anfífilo, colorantes orgánicos y conversión ascendente Nanopartículas

Terapia fotodinámica con Blended polímero conductor / Fullerene nanopartículas fotosensibilizadores

Multifuncional híbrido Fe

Un Minuto, Sub-Uno-Watt fototérmica Ablación Usando Porphysomes, Intrinsic Multifuncional nanovesículas

Control óptico de células vivas Actividad Eléctrica por conjugadas Polímeros

Poliuretano Magnético y Térmico

Oro nanorod asistida estimulación óptica de las células neuronales

Síntesis de nanopartículas luminiscentes persistentes para pantallas regrabables y aplicaciones de iluminación

Síntesis de nanopartículas luminiscentes persistentes para pantallas regrabables y aplicaciones de iluminación

Síntesis de nanopartículas luminiscentes persistentes para pantallas regrabables y aplicaciones de iluminación