We thank Dr. Martin Rosenberg, Dr. Gary Tarpley, and Dr. Keith Wood for support of this work, and Dr. James Cali for critical reading of the manuscript.&#160; DLD, JM, HB, NM, AN, JC, and MU are employees of Promega Corporation. MF, RJ, RA, and DA are employees of MS Bioworks, LLC.&#160;

Note: The following protocol can be used with any HaloTag fusion and in any cell line of choice stably or transiently transfected. For these examples, we will give protocols for transient transfection of HaloTag fusions in HEK293T or HeLa cells. For all experiments, we recommend use of the protein only control.
1. Fusion Protein Expression Test
<ol>
	<li>Obtain fusion protein construct:
	<ol>
		<li>Obtain pre-made HaloTag fusion vector or construct using existing vectors. For more information about available constructs, please see Table of Specific Reagents.</li>
		<li>If making any clone, it is recommended to sequence verify the DNA.</li>
	</ol>
	</li>
	<li>Testing expression of fusion protein and control:
	<ol>
		<li>For each sample, prepare 250 &#956;l of 1X SDS Loading Dye buffer (60 mM Tris HCL pH6.8, 0.75 mM bromophenol blue, 12.5% glycerol, 100 mM dithiothreitol, 0.5% SDS).</li>
		<li>For each fusion protein and control, plate 0.5 ml of HEK293T or HeLa cells in their appropriate media at a density of 2-4 x 105 cells/ml in a standard 24 well plate.</li>
		<li>Incubate for 18-24 hr at 37 &#176;C and 5% CO2, then transfect as recommended.</li>
		<li>24 hr post-transfection, add 0.5 &#956;l of 5mM tetra-methyl rhodamine (TMR) ligand to the media of each well and gently mix plate.</li>
		<li>Incubate transfected cells containing ligand for 15 min at 37 &#176;C and 5% CO2. </li>
		<li>Aspirate off media containing ligand and wash each well of cells gently with 1 ml RT PBS.</li>
		<li>Aspirate off PBS and perform a second wash with 1 ml RT PBS.</li>
		<li>Remove PBS and add 200 &#181;l of 1X SDS Loading dye buffer directly to cells.</li>
		<li>Pipette lysate from plate into 1.5 ml eppendorf tube.</li>
		<li>Boil lysate for 5 min at 95 &#176;C.</li>
		<li>Remove 5-10 &#956;l of the reaction and load onto SDS-PAGE gel.</li>
		<li>Use a fluorescent detection scanner (TMR Excitation: 555 nm, Emission: 585 nm) to detect bands. Use fluorescent protein markers as standards.</li>
		<li>If a fluorescent detection scanner is unavailable, perform western blots using antibodies against either the bait protein or protein fusion tag to detect expression of the fusion protein.</li>
	</ol>
	</li>
</ol>
2. Protein Pulldowns
<ol>
	<li>Preparation of transiently transfected cells:
	<ol>
		<li>For each fusion or control prepare one 15 cm dish with 30 ml of cells at 3-4 x 105 cells/ml or 1-1.2 x 107 cells total per construct.</li>
		<li>Incubate for 18-24 hr at 37 &#176;C and 5% CO2, then transfect construct as recommended.</li>
		<li>After 24-48 hr post-transfection, remove the media and gently wash the cell layer with 20-25 ml of ice cold PBS.</li>
		<li>Remove PBS wash, then add 25-30 ml of 4 &#176;C chilled PBS and gently scrape cells off the plate.</li>
		<li>Collect cells into conical tubes and centrifuge for 5-10 min at 2,000 x g and 4 &#176;C.</li>
		<li>Discard supernatant and place cell pellet at -80 &#176;C for a minimum of 30 min or a maximum of 6 months.</li>
	</ol>
	</li>
	<li>Equilibration of the HaloLink resin:
	<ol>
		<li>For each fusion or control sample, prepare 12 ml of Resin Equilibration/Wash buffer (100 mM Tris-HCl pH 7.5, 150 mM NaCl, and 0.005% IGEPAL CA-630). Note: It is very important to make and use the Resin Equilibration Buffer within 12 hr as diluted IGEPAL CA-630 is not stable or effective beyond this time frame.</li>
		<li>Gently shake or mix resin to obtain a uniform suspension.</li>
		<li>For each pull-down experiment, dispense 200 &#181;l of resin into a 1.5 ml microcentrifuge tubes.</li>
		<li>Centrifuge for 1 min at 800 x g (e.g., 3,000 rpm in a microcentrifuge), then carefully remove and discard the supernatant (ethanol) without disturbing resin at the bottom of the tube.</li>
		<li>Add 800 &#181;l of Resin Equilibration/Wash buffer and mix thoroughly by inverting the tube several times.</li>
		<li>Centrifuge for 2 min at 800 x g, then carefully remove and discard the supernatant.</li>
		<li>Repeat steps 2.2.5 and 2.2.6 two more times for a total of 3 washes.</li>
		<li>Do not remove the final wash or supernatant until ready to add cellular lysates described below (Step 2.3.8) to prevent the resin from drying out.</li>
	</ol>
	</li>
	<li>Binding and washing of fusion complexes:
	<ol>
		<li>For each sample, prepare 500 &#181;l of Mammalian Lysis Buffer (50 mM Tris-HCl pH 7.5, 150 mM NaCl, 1% Triton X-100, 0.1% Na Deoxycholate) and 1 ml of 1X TBS buffer (100 mM Tris-HCl pH 7.5 and 150 mM NaCl).</li>
		<li>Thaw the cell pellets and resuspend in 300 &#181;l of Mammalian Lysis Buffer by pipetting up and down or briefly vortexing.</li>
		<li>Add 6 &#181;l of 50X Protease Inhibitor Cocktail (800 &#181;g/ml benzamidine HCl, 500 &#181;g/ml phenanthroline, 500 &#181;g/ml aprotinin, 500 &#181;g/ml leupeptin, 500 &#181;g/ml pepstatin A, 50mM PMSF). Note: Protease cocktails which include AEBSF cannot be used as these interfere with protein fusion tag binding.</li>
		<li>Add 3 &#181;l RQ1 DNase and invert for 10 min at RT.</li>
		<li>Dounce with glass homogenizer 2.0 ml size; 25-30 strokes on ice, or pass cells through a 25 or 27 G needle 5-10 times to complete lysis. Note: Sonication is not recommended as complexes may fall apart and over-heating may affect the protein fusion tag activity.</li>
		<li>Centrifuge at 14,000 x g for 5 min at 4 &#176;C to clear the lysate.</li>
		<li>Transfer clear lysate, approximately 300 &#181;l total volume, to new tube and place on ice.</li>
		<li>Add to clear lysate an additional 700 &#181;l of 1X TBS buffer and mix well by pipetting up and down.</li>
		<li>Take equilibrated resin tubes prepared in Step 2.2.8 and remove final wash/supernatant from resin without disturbing resin at the bottom of the tube.</li>
		<li>Add to each tube of resin, the 1 ml of diluted lysate.</li>
		<li>Incubate with mixing on a tube rotator (or gentle mixer) for 15 min at 22 &#176;C. Note: Settling of resin during this time reduces binding efficiency. If binding at 4 &#176;C is desired, do so by mixing for 1 hr.</li>
		<li>Centrifuge resin tubes for 2 min at 800 x g and discard supernatant.</li>
		<li>Add 1 ml of Resin Equilibration/Wash buffer made at Step 2.2.1 and mix thoroughly by inverting the resin tube by hand several times.</li>
		<li>Centrifuge resin tubes for 2 min at 800 x g and discard the wash.</li>
		<li>Repeat Steps 2.3.12 followed by 2.3.14 three additional times.</li>
		<li>Add 1 ml of Resin Equilibration/Wash buffer and incubate at 22 &#176;C for 5 min with constant rotation.</li>
		<li>Centrifuge resin tubes for 2 min at 800 x g and discard the wash.</li>
		<li>Depending upon end application (see Introduction for further explanation), proceed to either Section 2.4 or 2.5.</li>
	</ol>
	</li>
	<li>SDS elution for denaturing gels, western blots, or mass spectrometry:
	<ol>
		<li>Resuspend the resin from each sample in 50 &#181;l SDS Elution buffer (1% SDS and 50 mM Tris-HCl pH7.5)</li>
		<li>Shake tubes at RT for 30 min.</li>
		<li>Centrifuge for 2 min at 800 x g and transfer eluates to fresh tubes for analysis.</li>
		<li>For western blot or silver stain gel, load 5-10 &#181;l on a SDS denaturing gel.</li>
		<li>For mass spectrometry, save 40 &#181;l of each sample at -20 &#176;C.</li>
	</ol>
	</li>
	<li>TEV Protease elution for functional assays, western blots, or mass spectrometry:
	<ol>
		<li>After removing the last wash, resuspend the resin in 50 &#181;l ProTEV cleavage buffer and 30 units of TEV enzyme.</li>
		<li>Incubate at 25 &#176;C with shaking for 1 hr.</li>
		<li>Centrifuge for 2 min&#160;at 800 x g.</li>
		<li>Transfer eluate to fresh tubes.</li>
		<li>Store sample at 4 &#176;C for immediate use in functional assays.</li>
	</ol>
	</li>
</ol>
3. Cellular Imaging of Fluorescently Labelled Fusion Proteins Using a Cytoplasmic and Nuclear Permeable Ligand
<ol>
	<li>Transfect, label, and image cells:
	<ol>
		<li>In an 8 well chambered coverglass for each fusion protein or control, plate 400 &#956;l of HeLa cells in their appropriate media in each well at a density of 1-2 x 105 cells/ml.</li>
		<li>Incubate for 18-24 hr at 37 &#176;C and 5% CO2, then transfect as recommended.</li>
		<li>18-24 hr post-transfection, dilute TMR ligand 1:200 in appropriate cellular media, then add 100 &#181;l of this solution to each well and gently mix.</li>
		<li>Incubate transfected cells containing ligand for 15 min at 37 &#176;C and 5% CO2.</li>
		<li>Aspirate off media containing ligand and replace with 500 &#956;l of appropriate media lacking protein fusion tag ligand, which has been pre-warmed to 37 &#176;C.</li>
		<li>Repeat twice for a total of three washes.</li>
		<li>Put cells back into incubator (37 &#176;C and 5% CO2) for 30 min.</li>
		<li>Aspirate off media and replace with 500 &#956;l of appropriate media, which has been pre-warmed to 37 &#176;C.</li>
		<li>Image on a microscope using appropriate acquisition parameters (TMR Excitation: 555 nm, Emission: 585 nm).</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Altelaar, A. F., Munoz, J., Heck, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Next-generation+proteomics:+towards+an+integrative+view+of+proteome+dynamics.">Next-generation proteomics: towards an integrative view of proteome dynamics.</a> Nat Rev Genet. 14, 35-48 (2013).</li><li>Tyers, M., Mann, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+genomics+to+proteomics.">From genomics to proteomics.</a> Nature. 422, 193-197 (2003).</li><li>Coulombe, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interaction+networks+of+the+molecular+machines+that+decode,+replicate,+and+maintain+the+integrity+of+the+human+genome.">Interaction networks of the molecular machines that decode, replicate, and maintain the integrity of the human genome.</a> Mol Cell Proteomics. 3, 851-856 (2004).</li><li>Gavin, A. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Proteome+survey+reveals+modularity+of+the+yeast+cell+machinery.">Proteome survey reveals modularity of the yeast cell machinery.</a> Nature. 440, 631-636 (2006).</li><li>Krogan, N. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global+landscape+of+protein+complexes+in+the+yeast+Saccharomyces+cerevisiae.">Global landscape of protein complexes in the yeast Saccharomyces cerevisiae.</a> Nature. 440, 637-643 (2006).</li><li>Sardiu, M. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Probabilistic+assembly+of+human+protein+interaction+networks+from+label-free+quantitative+proteomics.">Probabilistic assembly of human protein interaction networks from label-free quantitative proteomics.</a> Proc Natl Acad Sci U S A. 105, 1454-1459 (2008).</li><li>Domon, B., Aebersold, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mass+spectrometry+and+protein+analysis.">Mass spectrometry and protein analysis.</a> Science. 312, 212-217 (2006).</li><li>Daniels, D. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Examining+the+complexity+of+human+RNA+polymerase+complexes+using+HaloTag+technology+coupled+to+label+free+quantitative+proteomics.">Examining the complexity of human RNA polymerase complexes using HaloTag technology coupled to label free quantitative proteomics.</a> J Proteome Res. 11, 564-575 (2012).</li><li>Encell, L. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+dehalogenase-based+protein+fusion+tag+capable+of+rapid,+selective+and+covalent+attachment+to+customizable+ligands.">Development of a dehalogenase-based protein fusion tag capable of rapid, selective and covalent attachment to customizable ligands.</a> Curr Chem Genomics. 6, 55-71 (2012).</li><li>Ohana, R. F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=HaloTag-based+purification+of+functional+human+kinases+from+mammalian+cells.">HaloTag-based purification of functional human kinases from mammalian cells.</a> Protein Expr Purif. 76, 154-164 (2011).</li><li>Black, J. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=KDM4A+Lysine+Demethylase+Induces+Site-Specific+Copy+Gain+and+Rereplication+of+Regions+Amplified+in+Tumors.">KDM4A Lysine Demethylase Induces Site-Specific Copy Gain and Rereplication of Regions Amplified in Tumors.</a> Cell. 154, 541-555 (2013).</li><li>Deplus, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=TET2+and+TET3+regulate+GlcNAcylation+and+H3K4+methylation+through+OGT+and+SET1/COMPASS.">TET2 and TET3 regulate GlcNAcylation and H3K4 methylation through OGT and SET1/COMPASS.</a> EMBO J. 32, 645-655 (2013).</li><li>Galbraith, M. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=HIF1A+Employs+CDK8-Mediator+to+Stimulate+RNAPII+Elongation+in+Response+to+Hypoxia.">HIF1A Employs CDK8-Mediator to Stimulate RNAPII Elongation in Response to Hypoxia.</a> Cell. 153, 1327-1339 (2013).</li><li>Collins, M. O., Choudhary, J. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mapping+multiprotein+complexes+by+affinity+purification+and+mass+spectrometry.">Mapping multiprotein complexes by affinity purification and mass spectrometry.</a> Curr Opin Biotechno. 19, 324-330 (2008).</li><li>Collins, S. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Toward+a+comprehensive+atlas+of+the+physical+interactome+of+Saccharomyces+cerevisiae.">Toward a comprehensive atlas of the physical interactome of Saccharomyces cerevisiae.</a> Mol Cell Proteomics. 6, 439-450 (2007).</li><li>Mellacheruvu, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+CRAPome:+a+contaminant+repository+for+affinity+purification-mass+spectrometry+data.">The CRAPome: a contaminant repository for affinity purification-mass spectrometry data.</a> Nat Methods. 10, 730-736 (2013).</li><li>Dawson, M. A., Kouzarides, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cancer+epigenetics:+from+mechanism+to+therapy.">Cancer epigenetics: from mechanism to therapy.</a> Cell. 150, 12-27 (2012).</li><li>Jang, M. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+bromodomain+protein+Brd4+is+a+positive+regulatory+component+of+P-TEFb+and+stimulates+RNA+polymerase+II-dependent+transcription.">The bromodomain protein Brd4 is a positive regulatory component of P-TEFb and stimulates RNA polymerase II-dependent transcription.</a> Mol Cell. 19, 523-534 (2005).</li><li>Rahman, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Brd4+extraterminal+domain+confers+transcription+activation+independent+of+pTEFb+by+recruiting+multiple+proteins,+including+NSD3.">The Brd4 extraterminal domain confers transcription activation independent of pTEFb by recruiting multiple proteins, including NSD3.</a> Mol Cell Biol. 31, 2641-2652 (2011).</li><li>Yang, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recruitment+of+P-TEFb+for+stimulation+of+transcriptional+elongation+by+the+bromodomain+protein+Brd4.">Recruitment of P-TEFb for stimulation of transcriptional elongation by the bromodomain protein Brd4.</a> Mol Cell. 19, 535-545 (2005).</li><li>Halley, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+bioluminogenic+HDAC+activity+assay:+validation+and+screening.">A bioluminogenic HDAC activity assay: validation and screening.</a> J Biomol Screen. 16, 1227-1235 (2011).</li><li>Mack, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=To+selectivity+and+beyond.">To selectivity and beyond.</a> Nat Biotechnol. 28, 1259-1266 (2010).</li><li>Daniels, D. L., Urh, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+of+intracellular+protein--DNA+complexes+using+HaloCHIP,+an+antibody-free+alternative+to+chromatin+immunoprecipitation.">Isolation of intracellular protein--DNA complexes using HaloCHIP, an antibody-free alternative to chromatin immunoprecipitation.</a> Methods Mol Biol. 977, 111-124 (2013).</li><li>Urh, M., Rosenberg, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=HaloTag+a+Platform+Technology+for+Protein+Analysis.">HaloTag a Platform Technology for Protein Analysis.</a> Curr Chem Genomics. 6, 72-78 (2012).</li></ol>

Publication fees for this article are sponsored by Promega Corporation. Danette L. Daniels, Jacqui M&#233;ndez, H&#233;l&#232;ne Benink, Andrew Niles, Nancy Murphy and Marjeta Urh&#160;are&#160;employees of Promega Corporation,&#160;the commercial owner by assignment of patents of the HaloTag technology and its applications. &#160;Michael Ford, Richard Jones, Ravi Amunugama, and David Allen are employees of&#160;MSBioworks, which provides mass spectrometry services described in this manuscript.

Presented here are two fusion proteins, Halo-BRD4 and Halo-HDAC1, characterized in eukaryotic mammalian cells for expression, protein complex isolation and activity, and cellular localization.&#160; In working through these various protocols, there are several important steps for the success of each experiment.&#160; As is the case with any fusion protein, expression level and placement of the tag itself can be critical for maintaining physiology.&#160; It is therefore important to consider that N- and/or C-terminal fusions will need to be designed if prior knowledge or work with another tag has not been demonstrated for the particular protein of choice. &#160;Regarding expression, if the level is too high, dilution of DNA can be performed during transfection or use of vectors with weaker promoters are possible to achieve the level that is appropriate.&#160; Previous work has been performed showing efficient isolation of macromolecular complexes at endogenous levels of expression8, enabling work at very low levels of expression. If possible, cellular localization studies would also be able to provide insight as to the optimal tag placement position as well as relative expression level needed for proper physiology.

Once the fusion proteins are ready for pulldown experiments, to obtain maximum success with the protocol it is very important to follow the recommended time frames in the lysis, binding, and washing sections, as one of the biggest advantages is the speed of the complex isolation process.&#160; If any of these steps are lengthened in time, such as is required for an antibody-based capture method, there is a risk of complex disassociation or increased non-specific binding8.&#160; Similarly if the times are shortened during cellular lysis or binding, cells may not be completely lysed or efficiently captured respectively.&#160; If the number of washes is decreased or good mixing of the resin does not occur during the binding or washes, then background levels of non-specific proteins will be increased.&#160; Also, the means of lysis is very important as related to the binding efficiency to the resin.&#160; Attempts to sonicate the samples, remove the recommended detergent, add SDS or other strong detergent, and/or include the protease inhibitor AEBSF will result in reduced or loss of binding of fusion proteins and their complexes to the resin.

Existing methods for complex isolation from mammalian cells and human proteomic analysis struggle with the challenge of reducing background in analysis by mass spectrometry16.&#160; This has been so significant that a repository of contaminating proteins has been created by numerous mass spectrometry groups16.&#160; Background in mass spectrometry pulldown samples can be defined as anything which prevents identification of true interactors of the bait protein.&#160; As such, background can arise from contaminating non-specific proteins or also large concentrations of bait protein or antibodies used to precipitate bait proteins. Significant work was done in optimizing both the pulldown protocol presented here as well as the resin to minimize the level of the non-specific contaminating proteins in the pulldown process.&#160; This is evident in the silver stain gels and mass spectrometry analysis of the control (Figure 2).&#160; To address the high levels of bait protein or antibodies that can be equally detrimental as contaminants and with which other methodologies struggle, the pulldown with SDS elution is recommended (Protocol Section 2.4).&#160; Due to the covalent attachment to the resin, this process will leave the majority of the starting fusion protein covalently attached to the resin.&#160; A small percentage of bait is observed in the mass spectrometry analysis, which is believed to occur through hydrolysis, but it does not present a problem for detection of other weaker or transient interactions8.

As mentioned in the introduction, significant advances in proteomics have been enabled by significant advances in mass spectrometry1,7.&#160; Therefore, it is important to highlight important parameters of the choice of mass spectrometry analysis to deconvolute the mixture of proteins obtained in the pulldowns. &#160;Instrumentation must be robust and capable of routinely and efficiently analysing samples containing a small amount of protein, often less than &#60;1 &#181;g.&#160; Nanoscale chromatography involving 50-75 &#181;m internal diameter HPLC columns with flow rates in the 100-300 nl/min range is typically employed for compatibility with the small sample sizes and to maximize the sensitivity of the mass spectrometer. To maximize the information acquired in a single analysis state of the art mass spectrometers capable of acquiring high resolution mass spectra on a time scale compatible with aforementioned nanoscale separations, &#8805;10 Hz, are typically employed.&#160; These instruments have attomolar levels of sensitivity and can routinely acquire data with sub ppm precursor and product ion mass error tolerances. These performance characteristics serve to increase the yield of the number of identified proteins and the confidence associated with those identifications.

With these data we demonstrate physiological cellular localization, proper protein:protein interactions along with potential for discovery of novel interactions, and isolation of active complexes all using a single construct.&#160; Indeed alternative technologies can be used for each of these different aspects, but likely not for all23,24.&#160; With the HaloTag technology, a multifunctional approach can be used, advancing proteomics studies and obtaining a more complete understanding of protein function in mammalian cells.

Understanding of cellular function, response to stimuli, and changes in development and/or disease states is intricately tied to de-convolution of the proteome throughout these different dynamic states1,2. Much has been done to understand the proteome of lower organisms, however, given the number of proteins and all possible interactions, this has been very challenging in addressing the human proteome1,3-7.&#160; &#160;Advances in mass spectrometry have greatly enabled the ability to undertake these studies, and here we present an additional and significant advancement with the development of HaloTag technology for both efficient capture of protein complexes and functional characterization of human proteins from mammalian cells8-10. &#160;&#160;This technology has recently been shown in several studies to be a critical factor for discovery of important interactions, allowing for insight into novel protein function and understanding of disease11-13.
The HaloTag protein fusion was initially developed to address several challenges of traditional affinity tags and antibodies as related to protein capture, purification, and labelling8-10.&#160; Within nearly all methods for protein capture and purification, there is a non-covalent interaction step which is used for enrichment of a particular protein14.&#160; &#160;During this step, the protein and/or complex can disassociate due to diffusion, especially if the process requires hours instead of minutes to complete.&#160; To address this concern, the fusion protein was specifically engineered to rapidly and irreversibly interact with its ligands, which can be either particles, surfaces, or fluorophores9.&#160; Therefore once it is bound to its ligand, it remains bound, which is one of the most differentiating factor as compared to other affinity tags.&#160; Also demonstrated here, is the ability to address different biological questions with a single construct, which is possible by alternating ligands9 (Figure 1).&#160; For example, to interrogate protein interactions or function, surface ligands are used for capture of protein or complexes (Figure 1).&#160; In a separate experiment, the same fusion protein can be fluorescently labelled to study cellular localization, trafficking, or protein turnover (Figure 1).&#160; It is important to remember however that once a ligand is bound, whether it is a surface or a fluorophore, it is irreversible and therefore other ligands cannot then be subsequently bound in the same experiment.&#160;
Analysis of existing technologies to map protein interactions reveal the difficulty to efficiently isolate specific interactions, including those which are more transient or are in lower abundance1,6,7,14,15.&#160; Also, recent work by numerous groups shows the concern that within traditional isolation methods, particularly in the area of human proteomics, there are a significant number of protein contaminants which may mask signals from true interactors in mass spectrometry analysis16. The properties developed for the HaloTag protein and its co-developed resin address well these concerns.&#160; In the protocol for complex pulldowns (Figure 1), binding of complexes can be achieved in 15 min, both promoting complex capture and reducing levels of non-specific binding8.&#160; In addition, irreversibly binding allows for efficient capture of low abundance proteins and allows for the use of far fewer cells, again reducing background8. Once capture of complexes is established, the protocol includes mild wash conditions to maintain complex integrity.&#160; Elution of captured complexes can be performed by two methods and choosing which method is dictated by the goal of the downstream analysis.&#160; If the desire is to analyse or discover interacting proteins by Western blot or mass spectrometry, then it is recommended to elute complexes with denaturants such as SDS or urea (Figure 1).&#160; This is particularly advantageous for mass spectrometry as the protein originally fused to HaloTag, termed the bait protein, will remain behind bound to the resin and therefore will not dominate the population of peptides detected in the mass spectrometry.&#160; This also means however that the bait protein will likely not be visible in analysis by western blot, a significant difference as compared to other non-covalent affinity purifications or co-immunoprecipitations. &#160;&#160;If the goal is to purify a complex intact to be used for functional studies, elution can be performed using TEV (Tobacco Etch Virus) protease, which recognizes its cognate cleavage sequence encoded between the fusion protein and the bait protein (Figure 1).&#160;&#160; These samples could also be analysed by mass spectrometry, but as later shown, they will contain a significant amount of bait protein that may prevent detection of lower abundance, specific interactors.
Here we present pulldown and imaging protocols applied to two important therapeutical proteins, the bromodomain protein BRD4 and a histone deacetylase, HDAC117.&#160; We have shown with these examples, interaction with expected partners as determined by mass spectrometry, enzymatic activity after complex isolation for HDAC1, and proper cellular localization for both.&#160; Together, these results demonstrate the multifunctional nature and strength of the technology for characterization of eukaryotic protein interactions and function.&#160;

<table border="0" cellpadding="0" cellspacing="0" width="924">
	<tbody>
		<tr height="20">
			<td height="20" style="height:20px;width:337px;">HeLa Cells</td>
			<td style="width:204px;">ATCC</td>
			<td style="width:103px;">CCL-2</td>
			<td style="width:280px;">Adherent</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HEK293T Cells</td>
			<td>ATCC</td>
			<td>CRL-11268</td>
			<td style="width:280px;">Adherent</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Cellular growth media</td>
			<td>Invitrogen/Gibco</td>
			<td></td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">PBS - tissue culture certified</td>
			<td>Invitrogen/Gibco</td>
			<td></td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">FuGENE HD Transfection Reagent</td>
			<td>Promega</td>
			<td>E2311</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag Control Vector</td>
			<td>Promega</td>
			<td>G6591</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag-BRD4</td>
			<td>Kazusa DNA Research Institute</td>
			<td>FHC11882</td>
			<td style="width:280px;">N-terminal HaloTag fusion</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag-HDAC1</td>
			<td>Kazusa DNA Research Institute</td>
			<td>FHC02563</td>
			<td style="width:280px;">N-terminal HaloTag fusion</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">HaloTag Clones containing content</td>
			<td>Promega</td>
			<td>Various</td>
			<td style="width:280px;">http://www.promega.com/FindMyGene/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">HaloTag Flexi Vectors for cloning (N- or C-terminal)</td>
			<td>Promega</td>
			<td>Various</td>
			<td style="width:280px;">Choose based upon expression level and HaloTag orientation</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag TMR Ligand</td>
			<td>Promega</td>
			<td>G8251</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">IGEPAL CA-630</td>
			<td>Sigma</td>
			<td>18896</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag Mammalian Pull-Down and Labelling System</td>
			<td>Promega</td>
			<td>G6500</td>
			<td style="width:280px;">Contains HaloTag TMR ligand</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag Mammalian Pull-Down System</td>
			<td>Promega</td>
			<td>G6504</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Protease Inhibitor Cocktail, 50X</td>
			<td>Promega</td>
			<td>G6521</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Mammalian Lysis Buffer</td>
			<td>Promega</td>
			<td>G9381</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloTag Monoclonal Antibody</td>
			<td>Promega</td>
			<td>G9211</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">ProTEV Plus</td>
			<td>Promega</td>
			<td>V6101</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">RQ1 Dnase</td>
			<td>Promega</td>
			<td>M6101</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HaloLink Resin</td>
			<td>Promega&#160;</td>
			<td>G1912</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HDAC-Glo</td>
			<td>Promega</td>
			<td>G6420</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">PBS + 0.1% Triton X-100</td>
			<td></td>
			<td></td>
			<td style="width:280px;">For optional imaging</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">4% paraformaldehyde/0.2M sucrose/PBS</td>
			<td></td>
			<td></td>
			<td style="width:280px;">For optional imaging</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Ethanol</td>
			<td></td>
			<td></td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Tissue culture vessels and dishes</td>
			<td></td>
			<td></td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Cell culture incubator</td>
			<td></td>
			<td></td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Disposable cell lifter</td>
			<td>Thermo Fisher Scientific</td>
			<td>08-773-1</td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="18">
			<td height="18" style="height:18px;">Glass homogenizer such as Kontes Dounce Tissue Grinder</td>
			<td>Thermo Fisher Scientific</td>
			<td>K885300-0002</td>
			<td style="width:280px;">25-to 27- gauge needle could also be used</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Microcentrifuge</td>
			<td></td>
			<td></td>
			<td style="width:280px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Tube rotator such as Labquake</td>
			<td>Thermo Fisher Scientific</td>
			<td>4002110Q</td>
			<td style="width:280px;">Ideal for binding and washing steps</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;">Shaking platform such as Eppendorf Thermomixer</td>
			<td>Thermo Fisher Scientific</td>
			<td>05-400-200</td>
			<td style="width:280px;">Ideal for SDS elution and TEV cleavage steps</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Chambered cover glass</td>
			<td>Thermo Fisher Scientific</td>
			<td>155409</td>
			<td style="width:280px;">For optional imaging</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Fluorescent Microscrope (555nm Ex/585nm Em)</td>
			<td></td>
			<td></td>
			<td style="width:280px;">For optional imaging</td>
		</tr>
	</tbody>
</table>

discovering protein interactions and characterizing protein function using halotag technology

Research in proteomics has exploded in recent years with advances in mass spectrometry capabilities that have led to the characterization of numerous proteomes, including those from viruses, bacteria, and yeast.&#160; In comparison, analysis of the human proteome lags behind, partially due to the sheer number of proteins which must be studied, but also the complexity of networks and interactions these present. To specifically address the challenges of understanding the human proteome, we have developed HaloTag technology for protein isolation, particularly strong for isolation of multiprotein complexes and allowing more efficient capture of weak or transient interactions and/or proteins in low abundance. &#160;HaloTag is a genetically encoded protein fusion tag, designed for covalent, specific, and rapid immobilization or labelling of proteins with various ligands. Leveraging these properties, numerous applications for mammalian cells were developed to characterize protein function and here we present methodologies including: protein pull-downs used for discovery of novel interactions or functional assays, and cellular localization. We find significant advantages in the speed, specificity, and covalent capture of fusion proteins to surfaces for proteomic analysis as compared to other traditional non-covalent approaches. We demonstrate these and the broad utility of the technology using two important epigenetic proteins as examples, the human bromodomain protein BRD4, and histone deacetylase HDAC1.&#160; These examples demonstrate the power of this technology in enabling &#160;the discovery of novel interactions and characterizing cellular localization in eukaryotes, which will together further understanding of human functional proteomics. &#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;

When working with any new fusion protein, it is important to first test for expression of that protein after transfection and also validate that a protein of the proper molecular weight is being produced. As HaloTag fusion proteins can be fluorescently and covalently labelled with permeable or depending upon localization, impermeable ligands, it is possible to quickly determine expression by applying cellular lysates to denaturing gel electrophoresis followed by scanning on a fluorimager. Using the protocol described in Section 1.2, expression of Halo-BRD4 (189 kD) and the HaloTag alone control (Ctrl) is observed (34 kD, Figure 2A). As mentioned in the protocol, the expression of fusion proteins can also be detected using traditional Western blots with anti-HaloTag antibodies, or if they are available, antibodies to the bait protein. If possible, it is recommended to use the fluorescent ligand instead as it is more specific, faster, and easier than antibody detection, and also quantitative10.
After expression of the proper full-length fusion protein is verified, protein pulldowns can be performed. Shown in Figure 2B are the silver stained gels of biological replicates of Halo-BRD4 and Ctrl pulldowns eluted by SDS (Protocol Section 2.4) which demonstrate high reproducibility. The silver stain gels show a significant number of proteins are found to interact with the BRD4 protein and very low background in the control (Figure 2B). As mentioned in the Introduction, in this process of elution, the Halo-BRD4 will not be eluted from the resin as it remains covalently bound. Therefore, there is not a significant band at this molecular weight being detected in the silver stain (Figure 2B) or western blot (data not shown). To determine if these proteins are specific to BRD4, liquid chromatography mass spectrometry (LC-MS/MS) was performed on the complex mixture obtained after SDS elution. Shown in Figure 2C are spectral counts and normalized spectral abundance factor (NSAF) values for known interactors of BRD418-20 found in the Halo-BRD4 mass spectrometry analysis. The high abundance of components from pTEFb18,20 and also the BRD919 protein confirm specific capture of BRD4 complexes. As predicted by the silver stain gels (Figure 2B), numerous other proteins were also identified as potential interactors of BRD4 that were not observed in the control (data not shown). As these are previously unknown, they need to be independently verified by other methodologies to confirm whether the protein is a true interactor, and if so, if it is directly or indirectly associated with BRD4.
Isolated complexes can also be studied for activity; it is recommend to elute complexes using TEV protease (Protocol Section 2.5) so that they maintain functionality. In Figure 3A, a silver stain gel of Halo-HDAC1 pulldown complexes released from the resin using TEV protease is shown. As TEV protease will cleave in a linker region between the protein fusion tag and its fusion partner, significant amounts of the bait protein, in this case HDAC1, are observed (Figure 3A). To determine if this fraction contained HDAC1 activity, eluted TEV samples were tested in a luminescent HDAC assay, HDAC-Glo21. As shown in Figure 3B, HDAC1 pulldown samples showed high levels of HDAC1 activity (Column 1), which was specifically inhibited by a known HDAC inhibitor, SAHA22 (Column 2). As controls to further demonstrate specificity, no HDAC inhibition was observed with a related sirtuin family inhibitor, EX-52722 (Column 3) and no signal was detected using buffer alone without the HDAC1 pulldown sample added (Column 4).
A significant component of functional proteomics and understanding complexes, is also understanding protein localization and/or trafficking. As these same fusion constructs can be fluorescently labelled inside cells, we monitored their localization using confocal imaging. Following the protocol in Section 3, HeLa cells transiently transfected with Halo-BRD4 (Figure 4A) and Halo-HDAC1 (Figure 4B) were fluorescently labelled with the TMR ligand and imaged. As shown in Figures 4A and 4B, both localized to the nucleus as expected17. These data demonstrate that the presence of tag did not alter physiological cellular localization of its fusion partners.
<img alt="Figure 1" fo:content-width="6in" src="/files/ftp_upload/51553/51553fig1highres.jpg" width="600" /> 
Figure 1. Schematic of protein pulldown and confocal imaging applications. Using a single construct several applications for understanding protein function in mammalian cells are possible. For all, a Halo fusion construct is either stably or transiently expressed in adherent or suspension mammalian cells. For protein complex pulldowns, cells are then lysed, complexes are covalently captured on resin, and eluted through either SDS elution (left pathway) or TEV cleavage (right pathway). SDS elution is recommended for proceeding to mass spectrometry analysis, while TEV cleavage is optimal for performing functional analysis. To characterize expression, cellular localization, trafficking events, or protein turnover, live cells expressing fusion proteins are fluorescently labelled and further analysed on SDS PAGE gels or using confocal imaging. Both cell permeable or impermeable fluorescent ligands are available depending upon the localization or presentation of the fusion protein within the cell.
<img alt="Figure 2" fo:content-width="6in" src="/files/ftp_upload/51553/51553fig2highres.jpg" width="600" /> 
Figure 2. Halo-BRD4 protein expression, pulldown, and mass spectrometry analysis. (A) A SDS PAGE gels showing the expression of Halo-BRD4 fusion protein, 189 kD, and Halo protein fusion tag alone, 34 kD, control (Ctrl) within a HEK293T cellular lysate labelled with TMR ligand (Protocol Section 2.1). Gels were scanned with fluorimager for detection and a fluorescent molecular weight marker was used. (B) Silver stain gels of biological replicates for pulldowns of Halo-BRD4 and Ctrl samples eluted with SDS. Molecular weight sizes are indicated for the gel. (C) Spectral counts (left panel) and normalized spectral abundance factors (NSAF) values (right panel) which account for protein molecular weight of proteins identified in mass spectrometry analysis of biological replicates of Halo-BRD4 and Ctrl. Shown are proteins known to interact with BRD4, including components of pTEFb (CDK9 and Cyclin T)18,20, as well as BRD919. No peptides from these proteins were identified in the Ctrl.
<img alt="Figure 3" fo:content-width="6in" src="/files/ftp_upload/51553/51553fig3highres.jpg" width="600" /> 
Figure 3. Halo-HDAC1 complex isolation and activity analysis. (A) Silver stain gels showing the isolation of Halo-HDAC1 complexes and background from the Ctrl after TEV cleavage (Protocol Section 2.5). The prominent HDAC1 band (55 kDa) and the TEV protease band are labelled. The free HDAC1 is generated by TEV cleavage within an optimized linker between the HaloTag and HDAC1 fusion sequence after capture on the resin (Figure 1). (B) Graph showing the activity of HDAC1 complex isolations samples in a luminescent histone deacetylase assay, HDAC-Glo21. Column 1 of the graph shows high levels of HDAC activity contained with the Halo-HDAC1 pulldown samples (HDAC1). Column 2 reveals this activity can be specifically decreased by addition of the HDAC inhibitor, SAHA22, to the HDAC1 pulldown samples. As controls, Column 3 demonstrates a deacetylase inhibitor specific to the sirtuin family, but not HDACs, EX-52722, does not inhibit HDAC1 activity and Column 4 shows no activity is observed using buffer alone.
<img alt="Figure 4" fo:content-width="6in" src="/files/ftp_upload/51553/51553fig4highres.jpg" width="600" /> 
Figure 4. Halo-BRD4 and Halo-HDAC1 confocal imaging. Live cell confocal imaging of HeLa cells transfected with Halo-BRD4 (A) or Halo-HDAC1 (B) fluorescently labelled with TMR ligand. (A) Halo-BRD4 expression is restricted to the nucleus and (B) Halo-HDAC1 expression is predominantly nuclear. Left side of panels is fluorescent channel and right side is an overlay of the fluorescent channel with the DIC channel for each. Images were acquired on a confocal microscope equipped with a 37 &#176;C + CO2 environmental chamber using appropriate filter sets. Scale bars = 20 &#181;m.

Watch this Scientific Journal Video about Discovering Protein Interactions and Characterizing Protein Function Using HaloTag Technology at JoVE.com

Discovering Protein Interactions and Characterizing Protein Function Using HaloTag Technology

HaloTag technology is a multifunctional technology which has shown significant success in isolation of both small and large protein complexes from mammalian cells.&#160; Here we highlight the advantages of this technology compared to existing alternatives and demonstrate its utility to study numerous aspects of protein function inside eukaryotic cells.

Research in proteomics has exploded in recent years with advances in mass spectrometry capabilities that have led to the characterization of numerous ...

discovering-protein-interactions-characterizing-protein-function

Universidad de Cartagena UDEC

Research

JoVE Journal

Biology

36.9K Views.  Promega Corporation. HaloTag technology is a multifunctional technology which has shown significant success in isolation of both small and large protein complexes from mammalian cells.  Here we highlight the advantages of this technology compared to existing alternatives and demonstrate its utility to study numerous aspects of protein function inside eukaryotic cells.

Video: Discovering Protein Interactions and Characterizing Protein Function Using HaloTag Technology

Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid

In classical protein staining protocols using Coomassie Brilliant Blue (CBB), solutions with high contents of toxic and flammable organic solvents (Methanol, Ethanol or 2-Propanol) and acetic acid are used for fixation, staining and destaining of proteins in a gel after SDS-PAGE. To speed up the procedure, heating the staining solution in the microwave oven for a short time is frequently used. This usually results in evaporation of toxic or hazardous Methanol, Ethanol or 2-Propanol and a strong smell of acetic acid in the lab which should be avoided due to safety considerations. In a protocol originally published in two patent applications by E.M. Wondrak (US2001046709 (A1), US6319720 (B1)), an alternative composition of the staining solution is described in which no organic solvent or acid is used. The CBB is dissolved in bidistilled water (60-80mg of CBB G-250 per liter) and 35 mM HCl is added as the only other compound in the staining solution. The CBB staning of the gel is done after SDS-PAGE and thorough washing of the gel in bidistilled water. By heating the gel during the washing and staining steps, the process can be finished faster and no toxic or hazardous compunds are evaporating. The staining of proteins occurs already within 1 minute after heating the gel in staining solution and is fully developed after 15-30 min with a slightly blue background that is destained completely by prolonged washing of the stained gel in bidistilled water, without affecting the stained protein bands.

A short protocol for protein staining with Coomassie Brilliant Blue (CBB) G-250 in polyacrylamide gels is described without using organic solvents or acetic acid as in the classical staining procedures with CBB.

In classical protein staining protocols using Coomassie Brilliant Blue (CBB), solutions with high contents of toxic and flammable organic solvents ...

Using the GELFREE 8100 Fractionation System for Molecular Weight-Based Fractionation with Liquid Phase Recovery

The GELFREE 8100 Fractionation System is a novel protein fractionation system designed to maximize protein recovery during molecular weight based fractionation. The system is comprised of single-use, 8-sample capacity cartridges and a benchtop GELFREE Fractionation Instrument. During separation, a constant voltage is applied between the anode and cathode reservoirs, and each protein mixture is electrophoretically driven from a loading chamber into a specially designed gel column gel. Proteins are concentrated into a tight band in a stacking gel, and separated based on their respective electrophoretic mobilities in a resolving gel. As proteins elute from the column, they are trapped and concentrated in liquid phase in the collection chamber, free of the gel. The instrument is then paused at specific time intervals, and fractions are collected using a pipette. This process is repeated until all desired fractions have been collected. If fewer than 8 samples are run on a cartridge, any unused chambers can be used in subsequent separations.
This novel technology facilitates the quick and simple separation of up to 8 complex protein mixtures simultaneously, and offers several advantages when compared to previously available fractionation methods. This system is capable of fractionating up to 1mg of total protein per channel, for a total of 8mg per cartridge. Intact proteins over a broad mass range are separated on the basis of molecular weight, retaining important physiochemical properties of the analyte. The liquid phase entrapment provides for high recovery while eliminating the need for band or spot cutting, making the fractionation process highly reproducible1.

The accompanying video describes the use of the GELFREE 8100 Fractionation System, which partitions complex protein samples on the basis of molecular weight and recovers the fractions in liquid phase. The video describes how the technology works, how it is used, and provides resultant data, with polyacrylamide gel electrophoresis analysis of fractionated bovine liver homogenate.

The GELFREE 8100 Fractionation System is a novel protein fractionation system designed to maximize protein recovery during molecular weight based ...

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

Unraveling the interaction network of molecules in-vivo is key to understanding the mechanisms that regulate cell function and metabolism. A multitude of methodological options for addressing molecular interactions in cells have been developed, but most of these methods suffer from being rather indirect and therefore hardly quantitative. On the contrary, a few high-end quantitative approaches were introduced, which however are difficult to extend to high throughput. To combine high throughput capabilities with the possibility to extract quantitative information, we recently developed a new concept for identifying protein-protein interactions (Schwarzenbacher et al., 2008). Here, we describe a detailed protocol for the design and the construction of this system which allows for analyzing interactions between a fluorophore-labeled protein ("prey") and a membrane protein ("bait") in-vivo. Cells are plated on micropatterned surfaces functionalized with antibodies against the bait exoplasmic domain. Bait-prey interactions are assayed via the redistribution of the fluorescent prey. The method is characterized by high sensitivity down to the level of single molecules, the capability to detect weak interactions, and high throughput capability, making it applicable as screening tool.

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

This video shows experiments with subsequent analysis of protein-protein interactions by the use of micro-patterned surfaces. The approach offers the possibility to detect protein interactions in living cells and combines high throughput capabilities with the possibility to extract quantitative information.

Unraveling the interaction network of molecules in-vivo is key to understanding the mechanisms that regulate cell function and metabolism. A multitude of ...

Imaging Protein-protein Interactions in vivo

Protein-protein interactions are a hallmark of all essential cellular processes. However, many of these interactions are transient, or energetically weak, preventing their identification and analysis through traditional biochemical methods such as co-immunoprecipitation. In this regard, the genetically encodable fluorescent proteins (GFP, RFP, etc.) and their associated overlapping fluorescence spectrum have revolutionized our ability to monitor weak interactions in vivo using F&ouml;rster resonance energy transfer (FRET)1-3. Here, we detail our use of a FRET-based proximity assay for monitoring receptor-receptor interactions on the endothelial cell surface.

Imaging Protein-protein Interactions in vivo

This protocol describes how to image protein-protein interactions using a FRET-based proximity assay.

Protein-protein interactions are a hallmark of all essential cellular processes. However, many of these interactions are transient, or energetically weak, ...

The MultiBac Protein Complex Production Platform at the EMBL

Proteomics research revealed the impressive complexity of eukaryotic proteomes in unprecedented detail. It is now a commonly accepted notion that proteins in cells mostly exist not as isolated entities but exert their biological activity in association with many other proteins, in humans ten or more, forming assembly lines in the cell for most if not all vital functions.1,2 Knowledge of the function and architecture of these multiprotein assemblies requires their provision in superior quality and sufficient quantity for detailed analysis. The paucity of many protein complexes in cells, in particular in eukaryotes, prohibits their extraction from native sources, and necessitates recombinant production. The baculovirus expression vector system (BEVS) has proven to be particularly useful for producing eukaryotic proteins, the activity of which often relies on post-translational processing that other commonly used expression systems often cannot support.3 BEVS use a recombinant baculovirus into which the gene of interest was inserted to infect insect cell cultures which in turn produce the protein of choice. MultiBac is a BEVS that has been particularly tailored for the production of eukaryotic protein complexes that contain many subunits.4 A vital prerequisite for efficient production of proteins and their complexes are robust protocols for all steps involved in an expression experiment that ideally can be implemented as standard operating procedures (SOPs) and followed also by non-specialist users with comparative ease. The MultiBac platform at the European Molecular Biology Laboratory (EMBL) uses SOPs for all steps involved in a multiprotein complex expression experiment, starting from insertion of the genes into an engineered baculoviral genome optimized for heterologous protein production properties to small-scale analysis of the protein specimens produced.5-8 The platform is installed in an open-access mode at EMBL Grenoble and has supported many scientists from academia and industry to accelerate protein complex research projects.

Protein complexes catalyze key cellular functions. Detailed functional and structural characterization of many essential complexes requires recombinant production. MultiBac is a baculovirus/insect cell system particularly tailored for expressing eukaryotic proteins and their complexes. MultiBac was implemented as an open-access platform, and standard operating procedures developed to maximize its utility.

Proteomics  research revealed the impressive complexity of eukaryotic proteomes in  unprecedented detail. It is now a commonly accepted notion that ...

Budding Yeast Protein Extraction and Purification for the Study of Function, Interactions, and Post-translational Modifications

Homogenization by bead beating is a fast and efficient way to release DNA, RNA, proteins, and metabolites from budding yeast cells, which are notoriously hard to disrupt. Here we describe the use of a bead mill homogenizer for the extraction of proteins into buffers optimized to maintain the functions, interactions and post-translational modifications of proteins. Logarithmically growing cells expressing the protein of interest are grown in a liquid growth media of choice. The growth media may be supplemented with reagents to induce protein expression from inducible promoters (e.g. galactose), synchronize cell cycle stage (e.g. nocodazole), or inhibit proteasome function (e.g. MG132). Cells are then pelleted and resuspended in a suitable buffer containing protease and/or phosphatase inhibitors and are either processed immediately or frozen in liquid nitrogen for later use. Homogenization is accomplished by six cycles of 20 sec&#160;bead-beating (5.5 m/sec), each followed by one minute incubation on ice. The resulting homogenate is cleared by centrifugation and small particulates can be removed by filtration. The resulting cleared whole cell extract (WCE) is precipitated using 20% TCA for direct analysis of total proteins by SDS-PAGE followed by Western blotting. Extracts are also suitable for affinity purification of specific proteins, the detection of post-translational modifications, or the analysis of co-purifying proteins. As is the case for most protein purification protocols, some enzymes and proteins may require unique conditions or buffer compositions for their purification and others may be unstable or insoluble under the conditions stated. In the latter case, the protocol presented may provide a useful starting point to empirically determine the best bead-beating strategy for protein extraction and purification. We show the extraction and purification of an epitope-tagged SUMO E3 ligase, Siz1, a cell cycle regulated protein that becomes both sumoylated and phosphorylated, as well as a SUMO-targeted ubiquitin ligase subunit, Slx5.

The preparation of high quality yeast cell extracts is a necessary first step in the analysis of individual proteins or entire proteomes. Here we describe a fast, efficient, and reliable homogenization protocol for budding yeast cells that has been optimized to preserve protein functions, interactions, and post-translational modifications.

Homogenization by bead beating is a fast and efficient way to release DNA, RNA, proteins, and metabolites from budding yeast cells, which are notoriously ...

Protein-protein Interactions Visualized by Bimolecular Fluorescence Complementation in Tobacco Protoplasts and Leaves

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular fluorescence complementation (BiFC) is an in vivo method to monitor such interactions in plant cells. In the presented protocol the investigated candidate proteins are fused to complementary halves of fluorescent proteins and the respective constructs are introduced into plant cells via agrobacterium-mediated transformation. Subsequently, the proteins are transiently expressed in tobacco leaves and the restored fluorescent signals can be detected with a confocal laser scanning microscope in the intact cells. This allows not only visualization of the interaction itself, but also the subcellular localization of the protein complexes can be determined. For this purpose, marker genes containing a fluorescent tag can be coexpressed along with the BiFC constructs, thus visualizing cellular structures such as the endoplasmic reticulum, mitochondria, the Golgi apparatus or the plasma membrane. The fluorescent signal can be monitored either directly in epidermal leaf cells or in single protoplasts, which can be easily isolated from the transformed tobacco leaves. BiFC is ideally suited to study protein-protein interactions in their natural surroundings within the living cell. However, it has to be considered that the expression has to be driven by strong promoters and that the interaction partners are modified due to fusion of the relatively large fluorescence tags, which might interfere with the interaction mechanism. Nevertheless, BiFC is an excellent complementary approach to other commonly applied methods investigating protein-protein interactions, such as coimmunoprecipitation, in vitro pull-down assays or yeast-two-hybrid experiments.

Formation of protein complexes in vivo can be visualized by bimolecular fluorescence complementation. Interaction partners are fused to complementary parts of fluorescent tags and transiently expressed in tobacco leaves, resulting in a reconstituted fluorescent signal upon close proximity of the two proteins.

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular ...

Investigating Protein-protein Interactions in Live Cells Using Bioluminescence Resonance Energy Transfer

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live cells. BRET is the non-radiative transfer of energy from a 'donor' luciferase enzyme to an 'acceptor' fluorescent protein. In the most common configuration of this assay, the donor is Renilla reniformis luciferase and the acceptor is Yellow Fluorescent Protein (YFP). Because the efficiency of energy transfer is strongly distance-dependent, observation of the BRET phenomenon requires that the donor and acceptor be in close proximity. To test for an interaction between two proteins of interest in cultured mammalian cells, one protein is expressed as a fusion with luciferase and the second as a fusion with YFP. An interaction between the two proteins of interest may bring the donor and acceptor sufficiently close for energy transfer to occur. Compared to other techniques for investigating protein-protein interactions, the BRET assay is sensitive, requires little hands-on time and few reagents, and is able to detect interactions which are weak, transient, or dependent on the biochemical environment found within a live cell. It is therefore an ideal approach for confirming putative interactions suggested by yeast two-hybrid or mass spectrometry proteomics studies, and in addition it is well-suited for mapping interacting regions, assessing the effect of post-translational modifications on protein-protein interactions, and evaluating the impact of mutations identified in patient DNA.

Interactions between proteins are fundamental to all cellular processes. Using Bioluminescence Resonance Energy Transfer, the interaction between a pair of proteins can be monitored in live cells and in real time. Furthermore, the effects of potentially pathogenic mutations can be assessed.

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live ...

Determination of Protein-ligand Interactions Using Differential Scanning Fluorimetry

A wide range of methods are currently available for determining the dissociation constant between a protein and interacting small molecules. However, most of these require access to specialist equipment, and often require a degree of expertise to effectively establish reliable experiments and analyze data. Differential scanning fluorimetry (DSF) is being increasingly used as a robust method for initial screening of proteins for interacting small molecules, either for identifying physiological partners or for hit discovery. This technique has the advantage that it requires only a PCR machine suitable for quantitative PCR, and so suitable instrumentation is available in most institutions; an excellent range of protocols are already available; and there are strong precedents in the literature for multiple uses of the method. Past work has proposed several means of calculating dissociation constants from DSF data, but these are mathematically demanding. Here, we demonstrate a method for estimating dissociation constants from a moderate amount of DSF experimental data. These data can typically be collected and analyzed within a single day. We demonstrate how different models can be used to fit data collected from simple binding events, and where cooperative binding or independent binding sites are present. Finally, we present an example of data analysis in a case where standard models do not apply. These methods are illustrated with data collected on commercially available control proteins, and two proteins from our research program. Overall, our method provides a straightforward way for researchers to rapidly gain further insight into protein-ligand interactions using DSF.

Differential scanning fluorimetry is a widely used method for screening libraries of small molecules for interactions with proteins. Here, we present a straightforward method to extend these analyses to provide an estimate of the dissociation constant between a small molecule and its protein partner.

A wide range of methods are currently available for determining the dissociation constant between a protein and interacting small molecules. However, most ...

Probing High-density Functional Protein Microarrays to Detect Protein-protein Interactions

High-density functional protein microarrays containing ~4,200 recombinant yeast proteins are examined for kinase protein-protein interactions using an affinity purified yeast kinase fusion protein containing a V5-epitope tag for read-out. Purified kinase is obtained through culture of a yeast strain optimized for high copy protein production harboring a plasmid containing a Kinase-V5 fusion construct under a GAL inducible promoter. The yeast is grown in restrictive media with a neutral carbon source for 6 hr followed by induction with 2% galactose. Next, the culture is harvested and kinase is purified using standard affinity chromatographic techniques to obtain a highly purified protein kinase for use in the assay. The purified kinase is diluted with kinase buffer to an appropriate range for the assay and the protein microarrays are blocked prior to hybridization with the protein microarray. After the hybridization, the arrays are probed with monoclonal V5 antibody to identify proteins bound by the kinase-V5 protein. Finally, the arrays are scanned using a standard microarray scanner, and data is extracted for downstream informatics analysis1,2 to determine a high confidence set of protein interactions for downstream validation in vivo.

Using protein microarrays containing nearly the entire S. cerevisiae proteome is probed for rapid unbiased interrogation of thousands of protein-protein interactions in parallel. This method can be utilized for protein-small molecule, posttranslational modification, and other assays in high-throughput.

High-density functional protein microarrays containing ~4,200 recombinant yeast proteins are examined for kinase protein-protein interactions using an ...

Discovering Protein Interactions and Characterizing Protein Function Using HaloTag Technology

Summary

Explore More Videos

Chapters in this video

Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid

Using the GELFREE 8100 Fractionation System for Molecular Weight-Based Fractionation with Liquid Phase Recovery

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

Imaging Protein-protein Interactions in vivo

The MultiBac Protein Complex Production Platform at the EMBL

Budding Yeast Protein Extraction and Purification for the Study of Function, Interactions, and Post-translational Modifications

Protein-protein Interactions Visualized by Bimolecular Fluorescence Complementation in Tobacco Protoplasts and Leaves

Investigating Protein-protein Interactions in Live Cells Using Bioluminescence Resonance Energy Transfer

Determination of Protein-ligand Interactions Using Differential Scanning Fluorimetry

Probing High-density Functional Protein Microarrays to Detect Protein-protein Interactions