<p class="jove_content"> 、、、NRSA（DPS F32-NS-066698）;作業はスミスファミリー財団（BS）、ダナ財団（BS）、ジョン·メルク奨学金プログラム（BS）、NINDS（BS RO1-NS-07100801）からの補助金によって支えられてナンシー·ルーリーマーク財団（DPS）、NIH（P30-HD-18655; MRDDRCイメージングコア）。 </p>

<ol>
	<li>Ransohoff, R. M., Perry, V. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microglial+physiology:+unique+stimuli,+specialized+responses.">Microglial physiology: unique stimuli, specialized responses.</a> <em style='font-style: italic'>Annu Rev Immunol</em>. <b>27</b>, 119-145 (2009).</li><li>Aguzzi, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microglia:+scapegoat,+saboteur,+or+something+else.">Microglia: scapegoat, saboteur, or something else.</a> <em style='font-style: italic'>Science</em>. <b>339</b> (6116), 156-161 (2013).</li><li>Tremblay, M. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+microglia+in+the+healthy+brain.">The role of microglia in the healthy brain.</a> <em style='font-style: italic'>J Neurosci</em>. <b>31</b> (45), 16064-16069 (2011).</li><li>Hanisch, U. K., Kettenmann, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microglia:+active+sensor+and+versatile+effector+cells+in+the+normal+and+pathologic+brain.">Microglia: active sensor and versatile effector cells in the normal and pathologic brain.</a> <em style='font-style: italic'>Nat. Neurosci</em>. <b>10</b> (11), 1387-1394 (2007).</li><li>Sierra, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Janus-faced+microglia:+beneficial+and+detrimental+consequences+of+microglial+phagocytosis.">Janus-faced microglia: beneficial and detrimental consequences of microglial phagocytosis.</a> <em style='font-style: italic'>Front Cell Neurosci</em>. <b>7</b>, (2013).</li><li>Dheen, S. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microglial+activation+and+its+implications+in+the+brain+diseases.">Microglial activation and its implications in the brain diseases.</a> <em style='font-style: italic'>Curr Med Chem</em>. <b>14</b> (11), 1189-1197 (2007).</li><li>Schafer, D. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microglia+sculpt+postnatal+neural+circuits+in+an+activity+and+complement-dependent+manner.">Microglia sculpt postnatal neural circuits in an activity and complement-dependent manner.</a> <em style='font-style: italic'>Neuron</em>. <b>74</b> (4), 691-705 (2012).</li><li>Katz, L., Shatz, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synaptic+activity+and+the+constuction+of+cortical+circuits.">Synaptic activity and the constuction of cortical circuits.</a> <em style='font-style: italic'>Science</em>. <b>274</b> (5290), 1133-1138 (1996).</li><li>Sanes, J. R., Lichtman, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+the+vertebrate+neuromuscular+junction.">Development of the vertebrate neuromuscular junction.</a> <em style='font-style: italic'>Annu Rev Neurosci</em>. <b>22</b>, 389-442 (1999).</li><li>Hua, J. Y., Smith, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neural+activity+and+the+dynamics+of+central+nervous+system+development.">Neural activity and the dynamics of central nervous system development.</a> <em style='font-style: italic'>Nat Neurosci</em>. <b>7</b> (4), 327-332 (2004).</li><li>Holtmaat, A., Svoboda, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experience-dependent+structural+synaptic+plasticity+in+the+mammalian+brain.">Experience-dependent structural synaptic plasticity in the mammalian brain.</a> <em style='font-style: italic'>Nat Rev Neurosci</em>. <b>10</b> (9), 647-658 (2009).</li><li>Butz, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Activity-dependent+structural+plasticity.">Activity-dependent structural plasticity.</a> <em style='font-style: italic'>Brain Res Rev</em>. <b>60</b> (2), 287-305 (2009).</li><li>Bruel-Jungerman, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Brain+plasticity+mechanisms+and+memory:+a+party+of+four.">Brain plasticity mechanisms and memory: a party of four.</a> <em style='font-style: italic'>Neuroscientist</em>. <b>13</b> (5), 492-505 (2007).</li><li>Schafer, D. P., Stevens, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synapse+elimination+during+development+and+disease:+immune+molecules+take+centre+stage.">Synapse elimination during development and disease: immune molecules take centre stage.</a> <em style='font-style: italic'>Biochem Soc Trans</em>. <b>38</b> (2), 476-481 (2010).</li><li>Alexander, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+complement+system:+an+unexpected+role+in+synaptic+pruning+during+development+and+disease.">The complement system: an unexpected role in synaptic pruning during development and disease.</a> <em style='font-style: italic'>Annu Rev Neurosci</em>. <b>35</b>, 369-389 (2012).</li><li>Brown, A., Weaver, L. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+dark+side+of+neuroplasticity.">The dark side of neuroplasticity.</a> <em style='font-style: italic'>Exp Neurol</em>. <b>235</b> (1), 133-141 (2012).</li><li>Navarro, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chapter+27:+Neural+plasticity+after+nerve+injury+and+regeneration.">Chapter 27: Neural plasticity after nerve injury and regeneration.</a> <em style='font-style: italic'>Int Rev Neurobiol</em>. <b>87</b>, 483-505 (2009).</li><li>Tan, A. M., Waxman, S. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spinal+cord+injury,+dendritic+spine+remodeling,+and+spinal+memory+mechanisms.">Spinal cord injury, dendritic spine remodeling, and spinal memory mechanisms.</a> <em style='font-style: italic'>Exp Neurol</em>. <b>235</b> (1), 142-151 (2012).</li><li>Wolpaw, J. R., Tennissen, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Activity-dependent+spinal+cord+plasticity+in+health+and+disease.">Activity-dependent spinal cord plasticity in health and disease.</a> <em style='font-style: italic'>Annu Rev Neurosci</em>. <b>24</b>, 807-843 (2001).</li><li>Schafer, D. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+&amp;#34;quad-partite&amp;#34;+synapse:+Microglia-synapse+interactions+in+the+developing+and+mature+CNS.">The &amp;#34;quad-partite&amp;#34; synapse: Microglia-synapse interactions in the developing and mature CNS.</a> <em style='font-style: italic'>Glia</em>. <b>61</b> (1), 24-36 (2013).</li><li>Mukhopadhyay, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Manganese-induced+trafficking+and+turnover+of+the+cis-Golgi+glycoprotein+GPP130.">Manganese-induced trafficking and turnover of the cis-Golgi glycoprotein GPP130.</a> <em style='font-style: italic'>Mol Biol Cell</em>. <b>21</b> (7), 1282-1292 (2010).</li><li>Jung, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+fractalkine+receptor+CX(3)CR1+function+by+targeted+deletion+and+green+fluorescent+protein+reporter+gene+insertion.">Analysis of fractalkine receptor CX(3)CR1 function by targeted deletion and green fluorescent protein reporter gene insertion.</a> <em style='font-style: italic'>Mol Cell Biol</em>. <b>20</b>, 4106-4114 (2000).</li><li>Knobloch, M., Mansuy, I. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dendritic+spine+loss+and+synaptic+alterations+in+Alzheimer's+disease.">Dendritic spine loss and synaptic alterations in Alzheimer's disease.</a> <em style='font-style: italic'>Mol Neurobiol</em>. <b>37</b> (1), 73-82 (2008).</li><li>Masliah, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synaptic+remodeling+during+aging+and+in+Alzheimer's+disease.">Synaptic remodeling during aging and in Alzheimer's disease.</a> <em style='font-style: italic'>J Alzheimers Dis</em>. <b>9 (3 Suppl)</b>, 91-99 (2006).</li><li>Yoshiyama, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synapse+loss+and+microglial+activation+precede+tangles+in+a+P301S+tauopathy+mouse+model.">Synapse loss and microglial activation precede tangles in a P301S tauopathy mouse model.</a> <em style='font-style: italic'>Neuron</em>. <b>53</b> (3), 337-351 (1016).</li><li>Milnerwood, A. J., Raymond, L. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Early+synaptic+pathophysiology+in+neurodegeneration:+insights+from+Huntington's+disease.">Early synaptic pathophysiology in neurodegeneration: insights from Huntington's disease.</a> <em style='font-style: italic'>Trends Neurosci</em>. <b>33</b> (11), 513-523 (2010).</li><li>Noda, M., Suzumura, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sweepers+in+the+CNS:+Microglial+Migration+and+Phagocytosis+in+the+Alzheimer+Disease+Pathogenesis.">Sweepers in the CNS: Microglial Migration and Phagocytosis in the Alzheimer Disease Pathogenesis.</a> <em style='font-style: italic'>Int J Alzheimers Dis</em>. , (2012).</li><li>Rotshenker, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microglia+and+macrophage+activation+and+the+regulation+of+complement-receptor-3+(CR3/MAC-1)-mediated+myelin+phagocytosis+in+injury+and+disease.">Microglia and macrophage activation and the regulation of complement-receptor-3 (CR3/MAC-1)-mediated myelin phagocytosis in injury and disease.</a> <em style='font-style: italic'>J Mol Neurosci</em>. <b>21</b> (1), 65-72 (2003).</li><li>Smith, M. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phagocytosis+of+myelin+in+demyelinative+disease:+a+review.">Phagocytosis of myelin in demyelinative disease: a review.</a> <em style='font-style: italic'>Neurochem Res</em>. <b>24</b> (2), 261-268 (1999).</li></ol>

<p class="jove_content">利害の対立が宣言されていません。 </p>

<p class="jove_content">正確に食作用を測定するために、飲み込ま材料がリソソーム分解が発生した後、研究者はそれを視覚化することができるようにラベル付けされなければならない。さらに、高解像度イメージングは​​、セル全体の体積を可視化し、その内容を定量化する研究を可能にするソフトウェアを使用し、続いて、必要とされる。このプロトコルでは、高解像度の共焦点顕微鏡および三次元再構成と?...

<html><p class="jove_content">シナプス回路は、動物の生涯を通じて改造。発達中の脳では、シナプスを過剰に形成し、シナプスのサブセットを選択的に除去し<sup>、8月10日</sup>のまま、それらのシナプスの維持·強化を伴うシナプス刈り込みを受けなければならない。このプロセスは、成体の神経系の正確な接続の特性を達成するために必要である。成人において、シナプスは、特に学習および記憶の文脈において、プラスチック製とすることができる。この可塑性の構造的な相関を、樹状突起およびシナプス前終末<sup>11-13</sup>の添加および/ ​​または除去を含むと考えられている。健康的な神経系のこれらの役割に加えて、シナプスのリモデリングにも神経系疾患/傷害<sup>12,14,15</sup>に関与している。例えば、脊髄損傷後、切断された軸索は、その後、改造や機能回復の<sup>16〜19を</sup>実現するために新たなシナプスを形成する必要があります。 </p>NTは&quot;&gt;シナプス可塑性の重要な側面として浮上して、食作用または削除<sup>3,5,20</sup>宛てシナプスの飲み込みのプロセスです。我々は最近、健康で、出生後のマウス脳<sup>7</sup>におけるシナプス刈り込みのコンテキストで、この現象を示した。具体的に、ミクログリア、常駐CNS免疫細胞と食細胞は、ピーク時や発達シナプス刈り込み、視床の出生後の背側外側膝状核（DLGN）の領域において、シナプス前の入力を巻き込むことが示された。この飲み込みの遺伝的または薬理学的遮断シナプス接続の持続的な赤字となりました。 </p><p class="jove_content">このプロトコルでは、シナプス前の入力の食細胞媒介貪食を測定するための信頼性の高い、高度に定量的な分析を説明します。この記事の目的のために、このアッセイは、網膜内に存在することが網膜神経節細胞（RGC）を含む、現像retinogeniculateシステムの文脈で提示されるDLGN（ <strong>図1A）、</strong>プロジェクトシナプス前入力。開始するには、リソソーム分解耐性順行性標識戦略はDLGNにおけるRGC特異的シナプス前入力（ <strong>図<sup>1）7,21</sup></strong> <sup>を</sup>可視化するために使用される、説明する。この説明に続いて、画像化および定量3（3D）次元表面ボリュームレンダリングと組み合わせた共焦点顕微鏡を用いて貪食を測定するための詳細な方法論は説明する。この方法論は、固定組織標本に基づいているだけでなく、ライブイメージング研究での使用に適合されてもよい。アッセイは、健康な、出生後retinogeniculateシステムの文脈で検証されてきたが重要なことには、一方が他方の脳全体および疾患時の食細胞 - ニューロン相互作用、ならびに他の器官系における食細胞の機能を評価するために同じ手法を適用することができる。 </p>

<table><tbody><tr><td>Heat pad</td><td>Vet Equip, Inc.</td><td>965500&amp;nbsp;</td><td></td></tr><tr><td>Warm water source for heat pad</td><td>Kent Scientific</td><td>TP-700</td><td></td></tr><tr><td>Stereo microscope</td><td>DSC Optical</td><td>Zeiss Opmi -6 Surgical Microscope</td><td></td></tr><tr><td>Sliding microtome with freezing stage</td><td>Leica</td><td>SM2010 R</td><td></td></tr><tr><td>Microtome blade</td><td>Leica</td><td>14021607100</td><td></td></tr><tr><td>Fluorescent dissecting microscope</td><td>Nikon</td><td>SMZ800 with Epi-fluorescence attachment</td><td></td></tr><tr><td>Spinning disk confocal microscope</td><td>Perkin Elmer</td><td>UltraView Vox Spinning Disk Confocal</td><td></td></tr><tr><td>10 &amp;micro;l Hamilton gas tight syringes</td><td>Hamilton</td><td>80030</td><td>Use a different syringe for each color dye/tracer</td></tr><tr><td>Hamilton needles</td><td>Hamilton</td><td>7803-05, specifications: blunt, 1.5&quot;</td><td></td></tr><tr><td>Alexa-conjugated cholera toxin &amp;beta; subunit (CTB)</td><td>Invitrogen</td><td>488: C22841</td><td>Reconstitute in sterile saline, 80 &amp;micro;l (488), 100 &amp;micro;l (594), 20 &amp;micro;l (647)</td></tr><tr><td>594: C22842</td><td></td><td></td><td></td></tr><tr><td>647: C34778</td><td></td><td></td><td></td></tr><tr><td>Phosphate Buffered Saline&amp;nbsp;(PBS)</td><td>Sigma</td><td>P4417-50TAB</td><td></td></tr><tr><td>Neomycin and Polymyxin B Sulfates and Bacitracin Zinc Ophthalmic Ointment USP (antibiotic ointment)</td><td>Bausch &amp;amp; Lomb</td><td>24208-780-55</td><td></td></tr><tr><td>30.5 G needle</td><td>Becton Dickinson</td><td>305106</td><td></td></tr><tr><td>Spring scissors</td><td>Roboz</td><td>RS-5630</td><td></td></tr><tr><td>Cotton-tipped applicator</td><td>Fisher</td><td>23-400-125</td><td></td></tr><tr><td>Paraformaldeyde (PFA)</td><td>Electron Microscopy Sciences</td><td>15710</td><td>Dilute 16% to 4% in PBS. Paraformaldehye is toxic, use in a fume hood and wear personal protective equipment.</td></tr><tr><td>Dissection tools &amp;ndash; scissors, forceps, spatula</td><td>Small scissors: Fine Science Tools</td><td>Small scissors:14370-22</td><td></td></tr><tr><td>Large scissors: Roboz</td><td>Large scissors: RS-6820</td><td></td><td></td></tr><tr><td>#55 forceps: Fine Science Tools</td><td>#55 forceps: 11255-20</td><td></td><td></td></tr><tr><td>Spatula: Ted Pella, Inc.</td><td>Spatula: 13504</td><td></td><td></td></tr><tr><td>Sucrose</td><td>Sigma</td><td>S8501-5KG</td><td>Make 30% sucrose in PBS (weight/vol)</td></tr><tr><td>OCT Compound</td><td>VWR</td><td>25608-930</td><td></td></tr><tr><td>Weigh boat</td><td>USA Scientific</td><td>2347-1426</td><td></td></tr><tr><td>24-well plates</td><td>BD Biosciences</td><td>353047</td><td></td></tr><tr><td>Sodium phosphate monobasic</td><td>Sigma</td><td>S6566-500G</td><td>Make 0.2 M sodium phosphate monobasic (PB-A) in ddH&lt;sub&gt;2&lt;/sub&gt;O and 0.2 M sodium phosphate dibasic (PB-B) in ddH&lt;sub&gt;2&lt;/sub&gt;O. To make 0.1 M PB, combine 19 ml PB-A and 81 ml PB-B, fill to 200 ml with ddH&lt;sub&gt;2&lt;/sub&gt;O</td></tr><tr><td>Sodium phosphate dibasic&amp;nbsp;</td><td>Sigma</td><td>S5136-500G</td><td></td></tr><tr><td>Coverslips, 22 X 50 mm, No. 1.5</td><td>VWR</td><td>48393 194</td><td></td></tr><tr><td>Charged microscope slide</td><td>VWR</td><td>48311-703</td><td></td></tr><tr><td>Vectasheild</td><td>Vector Laboratories</td><td>H-1200</td><td></td></tr></tbody></table>

an engulfment assay: a protocol to assess interactions between cns phagocytes and neurons

<p class="jove_content">食作用は、細胞がその周囲の細胞外環境での材料（全体の細胞、細胞の一部、破片など）を飲み込み、その後、一般的にリソソーム分解を介して、この材料を消化する過程である。ミクログリアは、食細胞機能健康な脳（ <em>例えば、</em>シナプスの開発に神経変性疾患（アルツハイマー病<em>、例えば</em> 、βアミロイドクリアランス）から条件の広い範囲に記載されている中枢神経系（CNS）の免疫細胞である常駐剪定<sup>）1-6。</sup>以下のプロトコルを開発し、マウスのretinogeniculateシステム<sup>7</sup>におけるシナプス前入力のミクログリア媒介貪食を可視化し、定量化するために開発された貪食アッセイである。このアッセイは、この特定の文脈においてミクログリア機能を評価するために使用されたが、同様のアプローチは、脳（ <em>例えば、</em>星状細胞）、および身体の残りの部分で他の食細胞を評価するために使用され得る（ <em>例えば</em> 、末梢マクロファージ）だけでなく、シナプスのリモデリングが起こる他のコンテキスト（ <em>例えば</em> 、脳損傷/疾患）。 </p>

<p class="jove_content">最近では、発展途上retinogeniculateシステムにおけるシナプス前入力のミクログリア媒介貪食（ <strong>図<sup>1）7</sup></strong> <sup>を</sup>可視化し、定量化するために、この貪食アッセイを使用していました。 CX3CR1-EGFPヘテロ接合体マウスからRGCを順行それぞれ、左右の目にCTB-594およびCTB-647で追跡した。このトレースに続いて、DLGN内EGFP陽性ミクログリアを画像化した。これらの画像は、その後の?...

Watch this Scientific Journal Video about An Engulfment Assay: A Protocol to Assess Interactions Between CNS Phagocytes and Neurons at JoVE.com

An Engulfment Assay: A Protocol to Assess Interactions Between CNS Phagocytes and Neurons

<p class="jove_content">小膠細胞は、それらの細胞外環境に材料を貪食又は巻き込むための高い能力を有する中枢神経系（CNS）の居住者の免疫細胞である。ここでは、シナプスのコンポーネントのミクログリア媒介貪食を可視化し、測定するために広く適用可能で信頼性が高く、高度に定量的なアッセイが記載されている。 </p>

貪食アッセイ：CNS食細胞と神経細胞間の相互作用を評価するためのプロトコル

Phagocytosis is a process in which a cell engulfs material (entire cell, parts of a cell, debris, etc.) in its surrounding extracellular environment and ...

an-engulfment-assay-protocol-to-assess-interactions-between-cns

Universidad de Cartagena UDEC

Research

JoVE Journal

Neuroscience

18.2K ビュー.  Boston Children's Hospital, Harvard Medical School. 小膠細胞は、それらの細胞外環境に材料を貪食又は巻き込むための高い能力を有する中枢神経系（CNS）の居住者の免疫細胞である。ここでは、シナプスのコンポーネントのミクログリア媒介貪食を可視化し、測定するために広く適用可能で信頼性が高く、高度に定量的なアッセイが記載されている。 

ビデオ: An Engulfment Assay: A Protocol to Assess Interactions Between CNS Phagocytes and Neurons

Cellular Respiration

<h4>Autotrophs and Heterotrophs</h4>

<p>Living organisms require a continuous input of energy to maintain cellular and organismal functions such as growth, repair, movement, defense, and reproduction. Cells can only use chemical energy to fuel their functions, therefore they need to harvest energy from chemical bonds of biomolecules, such as sugars and lipids. Autotrophic organisms, namely plants, algae, and photosynthetic and chemosynthetic bacteria, convert inorganic materials into such biomolecules by harnessing energy from the environment, such as from sunlight during photosynthesis. Heterotrophic organisms are unable to synthesize high-energy biomolecules from inorganic materials, so they obtain energy by consuming carbon compounds produced by other organisms, primarily from autotrophs. When energy is needed, chemical bonds of carbon compounds are broken to harvest the energy stored in these bonds. The processes to harvest energy from biomolecules are called cellular respiration.</p>

<p>Cellular respiration occurs in both autotrophic and heterotrophic organisms, where energy becomes available to the organism most commonly through the conversion of adenosine diphosphate (ADP) to adenosine triphosphate (ATP). There are two main types of cellular respiration&#8212;aerobic respiration and anaerobic respiration. Aerobic respiration is a specific type of cellular respiration, in which oxygen (O<sub>2</sub>) is required to create ATP. In this case, glucose (C<sub>6</sub>H<sub>12</sub>O<sub>6</sub>) can be oxidized completely in a series of enzymatic reactions to produce carbon dioxide (CO<sub>2</sub>) and water (H<sub>2</sub>O).</p>

<h4>Aerobic Respiration</h4>

<p>Aerobic respiration occurs in three stages. A process called glycolysis splits glucose into two three-carbon molecules called pyruvate. This process releases energy, some of which is transferred to ATP. Next, pyruvate molecules enter the mitochondria to take part in a series of reactions called the Krebs cycle, also known as the citric acid cycle. This completes the breakdown of glucose, harvesting some of the energy into ATP and transferring electrons onto carrier molecules. In the last stage, known as oxidative phosphorylation, electrons pass through an electron transport system in the mitochondrial inner membrane, which maintains a gradient of hydrogen ions. Cells harness the energy of this proton gradient to generate the majority of the ATP during aerobic respiration.</p>

<h4>Anaerobic Respiration</h4>

<p>Aerobic respiration requires oxygen, however, there are many organisms that live in places where oxygen is not readily available or where other chemicals overwhelm the environment. Extremophiles are bacteria that can live in places such as deep ocean hydrothermal vents or underwater caves. Rather than using oxygen to undergo cellular respiration, these organisms use inorganic acceptors such as nitrate or sulfur, which are more easily obtainable in these harsh environments. This process is called anaerobic respiration.</p>

<p>When oxygen is not present and cellular respiration cannot take place, a special anaerobic respiration called fermentation occurs. Fermentation starts with glycolysis to capture some of the energy stored in glucose into ATP. However, since oxidative phosphorylation does not occur, fermentation produces fewer ATP molecules than aerobic respiration. In humans, fermentation occurs in red blood cells that lack mitochondria, as well in muscles during strenuous activity generating lactic acid as a byproduct, therefore it is named lactic acid fermentation. Some bacteria carry out lactic acid fermentation and are used to make products such as yogurt. In yeast, a process known as alcoholic fermentation generates ethanol and carbon dioxide as byproducts, and has been used by humans to ferment beverages or leaven dough.</p>

<h4>Photosynthesis</h4>

<p>Cellular respiration together with photosynthesis is a feature of the transfer of energy and matter, and highlights the interaction of organisms with their environment and other organisms in the community. Cellular respiration takes place inside individual cells, however, at the scale of ecosystems, the exchange of oxygen and carbon dioxide through photosynthesis and cellular respiration affects atmospheric oxygen and carbon dioxide levels.</p>

<p>Interestingly, the processes of cellular respiration and photosynthesis are directly opposite of one another, where the products of one reaction are the reactants of the other. Photosynthesis produces the glucose that is used in cellular respiration to make ATP. This glucose is then converted back into CO<sub>2</sub> during respiration, which is a reactant used in photosynthesis. More specifically, photosynthesis constructs one glucose molecule from six CO<sub>2</sub> and six H<sub>2</sub>O molecules by capturing energy from sunlight and releases six O<sub>2</sub> molecules as a byproduct. Cellular respiration uses six O<sub>2</sub> molecules to convert one glucose molecule into six CO<sub>2</sub> and six H<sub>2</sub>O molecules while harnessing energy as ATP and heat.</p>

<h4>Measuring Respiration</h4>

<p>Scientists can measure the rate of cellular respiration using a respirometer by assessing the rate of exchange of oxygen. Understanding the Ideal Gas Law is of fundamental importance for knowing how the respirometer functions. The Ideal Gas Law states that the number of gas molecules in a container can be determined from the pressure, volume, and temperature. More specifically, the product of the volume and pressure of a gas equals the product of the number of gas molecules, the ideal gas constant and the temperature of the gas. Respirometers contain potassium hydroxide which traps carbon dioxide that is produced by respiration in solid form as potassium carbonate. When cells consume oxygen, the gas volume in the respirometer system decreases with no carbon dioxide to increase it back up, allowing scientists to calculate the amount of oxygen used using the ideal gas equation.</p>

<p>Cellular respiration is an important process that creates usable energy for organisms, therefore, studying the contexts in which it is improved or impeded is not only interesting, but also necessary. Especially, mitochondria are essential for cellular respiration and any conditions that affect mitochondrial health have immense consequences for the health of the organism. For instance, mitochondrial myopathies are a group of neuromuscular diseases which are caused by mitochondrial damage, affecting predominantly nerve and muscle cells, which require high levels of energy to function<sup>1</sup>. Moreover, many poisons work by inhibiting cellular respiration. For example, cyanide inhibits the production of ATP through oxidative phosphorylation, thus understanding the mechanisms cyanide or other metabolic poisons enables treatment of individuals who have been exposed to them<sup>2</sup>. Similarly, some medications such as certain antibiotics, chemotherapeutics, statins, and anesthetics can also interfere with mitochondrial function and may not be suitable to treat patients that have mitochondrial disorders<sup>3</sup>.</p>

<h4>References</h4>

<ol class="references">
	<li><strong>Lin, MT and Beal, MF.</strong> Mitochondrial dysfunction and oxidative stress in neurodegenerative diseases. <em>Nature. </em>2006, Vol. 443, (787-95).</li>
	<li><strong>Beasley, DMG and Glass, WI.</strong> Cyanide poisoning: pathophysiology and treatment recommendations. <em>Occupational Medicine. </em>Vol. 48, 7 (427-31).</li>
	<li><strong>Finsterer, J and Segall, L.</strong> Drugs interfering with mitochondrial disorders. <em>Drug Chem Toxicol. </em>2010 , Vol. 33, 2 (138-51).</li>
</ol>


Cellular Respiration: Quantification using Microrespirometers - Concept

細胞呼吸

Autotrophs and Heterotrophs

Living organisms require a continuous input of energy to maintain cellular and organismal functions such as growth, repair, ...

Education

JoVE Lab Manual

生物学

細胞プロセス

Concentration Dependence

<p>Source: Smaa Koraym at Johns Hopkins University, MD, USA</p>
<ol class="note-items">
	<li data-note-item="1" data-parent-collapse="">Concentration Dependence<button class="expand">Expand</button>
	<p>In this experiment, you will combine varying concentrations of aqueous HCl and sodium thiosulfate to make solid sulfur, which rapidly gathers into opaque yellow particles at a certain sulfur concentration. Since the reaction solution starts clear and colorless, you can easily tell when it reaches that concentration.</p>
	<p>You&#39;ll use the same test tube and total volume each time, so it will take the same amount of sulfur to make each solution completely opaque. Thus, you&#39;ll measure the reaction progress by timing how long that takes. You&#39;ll then use that data to estimate the reaction orders of the individual reactants and of the overall reaction.</p>
	<p>Before starting the lab, make a table listing the reactant concentrations, the time to solution opacity, and the solution temperature for the trials.</p>
	<h4><strong>Table 1: Reaction progress</strong></h4>
	<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
		<tbody>
			<tr>
				<td><strong>Trial</strong></td>
				<td><strong>[Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub>] (M)</strong></td>
				<td><strong>[HCl] (M)</strong></td>
				<td><strong>Time (s)</strong></td>
				<td><strong>Temp (&#176;C)</strong></td>
			</tr>
			<tr>
				<td style="text-align: center;">1</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">2</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">3</td>
				<td style="text-align: center;">0.2 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">4</td>
				<td style="text-align: center;">0.15 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">5</td>
				<td style="text-align: center;">0.05 M</td>
				<td style="text-align: center;">3.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">6</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">6.0 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">7</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">4.5 M</td>
				<td></td>
				<td></td>
			</tr>
			<tr>
				<td style="text-align: center;">8</td>
				<td style="text-align: center;">0.1 M</td>
				<td style="text-align: center;">1.5 M</td>
				<td></td>
				<td></td>
			</tr>
		</tbody>
	</table>
	<p><a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/50/Table_1._Reaction_progress.xlsx" target="_blank">Click Here to download Table 1</a></p>
	<p>We want to make sure that the reactions are all taking place at room temperature. You&#39;ll perform two benchmark trials, three trials with different sodium thiosulfate concentrations, and three trials with different HCl concentrations. You will vary the concentrations by diluting stock solutions of sodium thiosulfate and HCl, as shown in the following tables.</p>
	<h4><strong>Table 2: Sodium thiosulfate dilutions</strong></h4>
	<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
		<tbody>
			<tr>
				<td style="text-align: center;"><strong>Target Concentration</strong></td>
				<td style="text-align: center;"><strong>Volume of 0.2 M sodium thiosulfate</strong></td>
				<td style="text-align: center;"><strong>Volume of DI water</strong></td>
			</tr>
			<tr>
				<td style="text-align: center;">0.05 M</td>
				<td style="text-align: center;">5 mL</td>
				<td style="text-align: center;">15 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">0.10 M</td>
				<td style="text-align: center;">10 mL</td>
				<td style="text-align: center;">10 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">0.15 M</td>
				<td style="text-align: center;">15 mL</td>
				<td style="text-align: center;">5 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">0.20 M</td>
				<td style="text-align: center;">20 mL</td>
				<td style="text-align: center;">0 mL</td>
			</tr>
		</tbody>
	</table>
	<p><a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/50/Table_2._Sodium_thiosulfate_dilutions.xlsx" target="_blank">Click Here to download Table 2</a></p>
	<h4><strong>Table 3: HCl Dilutions</strong></h4>
	<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
		<tbody>
			<tr>
				<td style="text-align: center;"><strong>Target Concentration</strong></td>
				<td style="text-align: center;"><strong>Volume of 6.0 M HCl</strong></td>
				<td style="text-align: center;"><strong>Volume of DI water</strong></td>
			</tr>
			<tr>
				<td style="text-align: center;">1.5 M</td>
				<td style="text-align: center;">2.5 mL</td>
				<td style="text-align: center;">7.5 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">3.0 M</td>
				<td style="text-align: center;">5.0 mL</td>
				<td style="text-align: center;">5.0 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">4.5 M</td>
				<td style="text-align: center;">7.5 mL</td>
				<td style="text-align: center;">2.5 mL</td>
			</tr>
			<tr>
				<td style="text-align: center;">6.0 M</td>
				<td style="text-align: center;">10 mL</td>
				<td style="text-align: center;">0 mL</td>
			</tr>
		</tbody>
	</table>
	<p><a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/50/Table_3._HCl_Dilutions.xlsx" target="_blank">Click Here to download Table 3</a></p>
	<p>Remember to use caution when handling HCl, which is toxic and highly corrosive. Sulfur dioxide, which is a gaseous product of this reaction, is also toxic. You will leave the reaction waste in the fume hood overnight to let the sulfur dioxide escape harmlessly.</p>
	<ul class="lab-items">
		<li data-sub-note-item="1-6">
		<div class="lab-step">First, put on a lab coat, splash-proof safety glasses, and nitrile gloves.</div>
		</li>
		<li data-sub-note-item="1-7">
		<div class="lab-step">Fill a plastic wash bottle with deionized water and get a test tube marked with an X.</div>
		</li>
		<li data-sub-note-item="1-8">
		<div class="lab-step">Clamp the test tube over the center of a small stir plate. The label must be on the opposite side from you. Make sure that you can clearly see the X. Place a small magnetic stir bar in the test tube.</div>
		</li>
		<li data-sub-note-item="1-9">
		<div class="lab-step">Use a thermometer clamp to secure a glass thermometer in the lower third of the tube, keeping it clear of the X and the stir bar.</div>
		</li>
		<li data-sub-note-item="1-10">
		<div class="lab-step">Cut a sheet of about 20 squares of plastic paraffin film from a roll and bring the sheet back to your hood.</div>
		</li>
		<li data-sub-note-item="1-11">
		<div class="lab-step">Lay paper towels in the fume hood as a clean surface for labware to be reused.</div>
		</li>
		<li data-sub-note-item="1-12">
		<div class="lab-step">Label a 600-mL beaker as &#8216;waste&#8217; for the reaction, a 100-mL beaker as &#8216;0.2 M sodium thiosulfate&#8217;, and a 50-mL beaker as &#8216;6 M HCl&#8217;.</div>
		</li>
		<li data-sub-note-item="1-13">
		<div class="lab-step">Fill the 100-mL beaker with 0.2 M sodium thiosulfate from the stock bottle in the dispensing hood.</div>
		</li>
		<li data-sub-note-item="1-14">
		<div class="lab-step">After that, bring the 50-mL beaker and a watch glass to the acid-dispensing hood to obtain 50 mL of 6 M HCl. Cover the filled beaker with the watch glass and bring your portion of HCl back to your hood.</div>
		</li>
		<li data-sub-note-item="1-15">
		<div class="lab-step">Prepare 20 mL of 0.1 M sodium thiosulfate for the first benchmark trial. Use a 10-mL volumetric pipette to measure 10 mL of 0.2 M sodium thiosulfate and dispense it into a 20-mL volumetric flask. Fill the 20-mL volumetric flask with deionized water to the mark.</div>
		</li>
		<li data-sub-note-item="1-16">
		<div class="lab-step">Then, cut a square of plastic paraffin film, seal the flask, and invert it several times to thoroughly mix the solution.</div>
		</li>
		<li data-sub-note-item="1-17">
		<div class="lab-step">Remove the film and pour the solution into the test tube.</div>
		</li>
		<li data-sub-note-item="1-18">
		<div class="lab-step">Prepare 10 mL of 3 M HCl. Pipette 5 mL of 6 M HCl into a 10-mL graduated cylinder. Add deionized water to fill the graduated cylinder to the 10-mL line.</div>
		</li>
		<li data-sub-note-item="1-19">
		<div class="lab-step">Seal the top of the graduated cylinder with plastic paraffin film and thoroughly mix the HCl solution by inverting it several times.</div>
		</li>
		<li data-sub-note-item="1-20">
		<div class="lab-step">Now, start the stir motor and get a reset stopwatch. Confirm that you can see the X through the solution in the test tube.</div>
		</li>
		<li data-sub-note-item="1-21">
		<div class="lab-step">Simultaneously start the stopwatch and pour the 3 M HCl into the test tube.</div>
		</li>
		<li data-sub-note-item="1-22">
		<div class="lab-step">Watch the X through the solution, which will start becoming cloudy when enough sulfur has been produced to saturate it. Stop the stopwatch exactly when the solution becomes so opaque that the X disappears.</div>
		</li>
		<li data-sub-note-item="1-23">
		<div class="lab-step">Record the time in your lab notebook for benchmark trial 1 and then reset the stopwatch. Also, record the temperature of the solution.</div>
		</li>
		<li data-sub-note-item="1-24">
		<div class="lab-step">Now, turn off the stir motor, remove the thermometer, and rinse it with deionized water into the waste beaker.</div>
		</li>
		<li data-sub-note-item="1-25">
		<div class="lab-step">Then, empty the test tube into the waste beaker, retrieve the stir bar with long forceps, and rinse the test tube and stir bar with deionized water.</div>
		</li>
		<li data-sub-note-item="1-26">
		<div class="lab-step">Thoroughly clean the test tube with a test tube brush. Briefly rinse the volumetric flask and graduated cylinder with deionized water as well. Dry everything with paper towels.</div>
		</li>
		<li data-sub-note-item="1-27">
		<div class="lab-step">Repeat the trial in the exact same way for the second benchmark time. If the time is not within 3 - 5 s of the first trial, repeat the benchmark trial until you have two consistent trials.</div>
		</li>
		<li data-sub-note-item="1-28">
		<div class="lab-step">Follow the same overall procedure for each subsequent trial, changing the dilutions as indicated in your table and cleaning your glassware between each trial. Use a 5-mL volumetric pipette as needed when measuring the sodium thiosulfate stock solution in trials four and five.</div>
		</li>
		<li data-sub-note-item="1-29">
		<div class="lab-step">Once you have performed all eight trials, rinse your glassware and tools one last time and neutralize the reaction waste with baking soda. Use caution because sulfur dioxide is one of the reaction products.</div>
		</li>
		<li data-sub-note-item="1-30">
		<div class="lab-step">Transfer the neutralized reaction waste to the designated waste container. Then, pour any remaining sodium thiosulfate solution into its labeled waste container and rinse the beaker with deionized water.</div>
		</li>
		<li data-sub-note-item="1-31">
		<div class="lab-step">Neutralize any remaining HCl with baking soda before flushing it down the drain with tap water.</div>
		</li>
		<li data-sub-note-item="1-32">
		<div class="lab-step">Finally, clean and put away your labware according to your standard practices and throw out any trash remaining in your hood. Your instructor will dispose of the reaction waste later.</div>
		</li>
	</ul>
	</li>
	<li data-note-item="2" data-parent-collapse="">Results<button class="expand">Expand</button>
	<ul class="lab-items">
		<li data-sub-note-item="2-1">
		<div class="lab-step">Now, estimate the reaction order of sodium thiosulfate and HCl. Calculate the starting concentration of sodium thiosulfate in the reaction mixture for trials 1 through 5. Looking at the concentration of sodium thiosulfate and the reaction times, we see that as the concentration doubles, the time to opacity is halved.
		<h4><strong>Table 4: Estimating reaction order sodium thiosulfate</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Trial</strong></td>
					<td style="text-align: center;"><strong>[Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub>] added</strong></td>
					<td style="text-align: center;"><strong>Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub> volume (mL)</strong></td>
					<td style="text-align: center;"><strong>Total volume (mL)</strong></td>
					<td style="text-align: center;"><strong>[Na<sub>2</sub>S<sub>2</sub>O<sub>3</sub>] in mixture </strong></td>
					<td style="text-align: center;"><strong>Time (s)</strong></td>
					<td style="text-align: center;"><strong>Inverse time (s<sup>-1</sup>)</strong></td>
				</tr>
				<tr>
					<td style="text-align: center;">1, 2</td>
					<td style="text-align: center;">0.1</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">3</td>
					<td style="text-align: center;">0.2</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">4</td>
					<td style="text-align: center;">0.15</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">5</td>
					<td style="text-align: center;">0.05</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
			</tbody>
		</table>
		<a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/50/Table_4._Estimating_reaction_order_sodium_thiosulfate.xlsx" target="_blank">Click Here to download Table 4</a></div>
		</li>
		<li data-sub-note-item="2-2">
		<div class="lab-step">Remember that each trial used the same volume, so it took the same amount of sulfur to make each solution opaque. Thus, the reaction is twice as fast when the sodium thiosulfate concentration is doubled.</div>
		</li>
		<li data-sub-note-item="2-3">
		<div class="lab-step">When the concentration increases by a factor of 4, the reaction rate also increases by a factor of 4. This one-to-one relationship suggests that the reaction was first order for sodium thiosulfate. If so, we would expect a plot of rate versus sodium thiosulfate concentration to be linear.</div>
		</li>
		<li data-sub-note-item="2-4">
		<div class="lab-step">We didn&#39;t measure how much sulfur it took to turn the solution opaque, but we assume that it was the same for each trial. This lets us use the inverse of time to opacity as a stand-in for the rate. The slope won&#39;t be equal to k, but that&#39;s OK for this lab.</div>
		</li>
		<li data-sub-note-item="2-5">
		<div class="lab-step">Plot inverse reaction time as a function of sodium thiosulfate concentration. This confirms the linear relationship between sulfur production and thiosulfate concentration. Thus, the reaction seems to be first order with respect to thiosulfate.</div>
		</li>
		<li data-sub-note-item="2-6">
		<div class="lab-step">Use the same method to estimate the reaction order of HCl. First, calculate the starting concentration of HCl in the benchmark trials and in trials 6 through 8.
		<h4><strong>Table 5: Estimating reaction order HCl</strong></h4>
		<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
			<tbody>
				<tr>
					<td style="text-align: center;"><strong>Trial</strong></td>
					<td style="text-align: center;"><strong>[HCl] added</strong></td>
					<td style="text-align: center;"><strong>HCl volume (mL) </strong></td>
					<td style="text-align: center;"><strong>Total volume (mL) </strong></td>
					<td style="text-align: center;"><strong>[HCl] in mixture </strong></td>
					<td style="text-align: center;"><strong>Time (s)</strong></td>
				</tr>
				<tr>
					<td style="text-align: center;">1, 2</td>
					<td style="text-align: center;">0.1</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">3</td>
					<td style="text-align: center;">0.2</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">4</td>
					<td style="text-align: center;">0.15</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
				<tr>
					<td style="text-align: center;">5</td>
					<td style="text-align: center;">0.05</td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
					<td style="text-align: center;"></td>
				</tr>
			</tbody>
		</table>
		<a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/50/Table_5._Estimating_reaction_order_HCl.xlsx" target="_blank">Click Here to download Table 5</a></div>
		</li>
		<li data-sub-note-item="2-7">
		<div class="lab-step">Then, look at the concentration of HCl and the reaction times for these trials. The reaction times are nearly identical, so the HCl concentration has no effect on the reaction rate. This means that HCl seems to be zeroth order for this reaction.</div>
		</li>
		<li data-sub-note-item="2-8">
		<div class="lab-step">Lastly, add up the reaction orders of the reactants to get the overall reaction order.</div>
		</li>
	</ul>
	</li>
</ol>

Concentration Dependence and Reaction Order - Procedure

濃度依存性

Source: Smaa Koraym at Johns Hopkins University, MD, USA

	Concentration DependenceExpand
	In this experiment, you will combine varying concentrations of ...

化学

Lab Manual Sub Articles

Animal Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Making Choice Chambers
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Before beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the bottom of both bottles. One line should be 1 cm from the base of the bottle and the other should be 1.5 cm from the base of the bottle.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Use a razor blade to make a small cut in each bottle at the mark. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, insert the scissors and carefully cut along the line until the bottoms of the bottles are removed completely.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Fit one bottle bottom into the other.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Tape the bottles together to make a secure chamber.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Use the razor blade and scissors to poke a hole into the center of the chamber. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Take a piece of tape and fold the edge onto itself to make a tab and place the tape over the hole.  Note: The tab helps with easy removal and reattachment of the tape to the chamber.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Use the Sharpie to label one side of the chamber A and the other side B.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Upon receiving the colony of <em>Drosophila</em>, perform a count to make sure there are 40 living individuals in the vial.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Geotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To perform a geotaxis assay, first attach a clean, empty bottle cap to each end of the choice chamber and turn the fly vial upside down onto its lid.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Open the tape flap in the center of the choice chamber.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Insert the funnel into the hole and tap all of the flies into the chamber. HYPOTHESES: The alternate hypothesis is that more flies will be moving against gravity, or up, regardless of the orientation of the choice chamber. Alternatively, if the flies are positively geotactic, then more flies will move down, or with gravity. The null hypothesis is that the flies will have no preference with regard to gravity and will move randomly within the chamber. 
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Once the <em>Drosophila</em> are in the chamber, close the tape flap, rotate the chamber so that it stands vertically with side A on the bottom, and start the timer.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Immediately, count the number of <em>Drosophila</em> that are moving up and the number that are moving down. Record these data for time point 0 in the table. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">After 30 seconds, rotate the chamber so that side B is on the bottom and count the number of <em>Drosophila</em> that are moving up or down. Record these data for time point 30 in the table.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">After 60 seconds, rotate the chamber so that side A is on the bottom again and record the number of moving flies for time point 60.  <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/15/Table_1_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Hold the chamber over the fly vial and carefully open the cap to return all of the <em>Drosophila</em> back to their empty vial. 
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Phototaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">To perform a phototaxis analysis, first cover side A of the choice chamber with tin foil, taking care that the foil reaches to the exact center between the two sides. 
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Ensure the caps are secured on both ends of the chamber.  HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found in the light side of the choice chamber, if the flues are attracted to light, or on the dark side if they are repelled by light. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus. Therefore, equal numbers of flies will be found on either side of the choice chamber.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Open the tape flap in the center of the choice chamber, insert the funnel into the hole, and tap all 40 flies into the chamber as previously described.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Set the timer to sound an alarm at 10 minutes.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">When the alarm sounds, stop the timer, and count the number of flies in the open side B of the chamber.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Subtract that number from the total number of flies added to the choice chamber to calculate the number of flies in the covered side A.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Record these data in the table for time point 10.  <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/15/Table_2_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Carefully, return all of the flies back to their empty vial.
</div></li></ul></li><li data-note-item="4" data-parent-collapse="">Chemotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="4-1"><div class="lab-step">HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found on the side of the chamber with the apple cider vinegar if the flies are attracted to the odor. Or, if the flies are repelled by the vinegar, then more of them will be found on the side of the chamber presenting the odorless water. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus and will move randomly in the chamber.  Use an individual disposable plastic pipette to dispense two drops of the apple cider vinegar onto one cotton ball for side A of the chamber. 
</div></li><li data-sub-note-item="4-2"><div class="lab-step">Use an individual disposable plastic pipette to dispense two drops of the distilled water onto a cotton ball for side B of the chamber. 
</div></li><li data-sub-note-item="4-3"><div class="lab-step">Fold two pieces of tape over themselves to create individual pieces of double-sided tape and use the tape to attach each cotton ball to the inside of the single bottle cap.
</div></li><li data-sub-note-item="4-4"><div class="lab-step">Screw the bottle caps with the cotton balls onto their corresponding sides of the chamber.
</div></li><li data-sub-note-item="4-5"><div class="lab-step">Transfer all of the flies into the chamber and set the timer to sound an alarm after 10 minutes. 
</div></li><li data-sub-note-item="4-6"><div class="lab-step">When the alarm sounds, stop the timer and record the number of flies in each side of the chamber. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/15/Table_3_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="4-7"><div class="lab-step">At the end of the final experiment, funnel the flies into a morgue tube containing 70% ethanol. 
</div></li><li data-sub-note-item="4-8"><div class="lab-step">Dismantle the choice chambers for recycling.  NOTE: Since all of the chemicals used in these experiments are lab safe, the liquids can be disposed of down the sink, the chambers rinsed, and the solids can be thrown away in the trash. 
</div></li></ul></li><li data-note-item="5" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="5-1"><div class="lab-step">Gather all of the data collected for the geotaxis, phototaxis, and chemotaxis experiments.
</div></li><li data-sub-note-item="5-2"><div class="lab-step">Plot these values as bar graphs for different conditions and different time points.
</div></li><li data-sub-note-item="5-3"><div class="lab-step">Use these data to draw inferences about the behavior of <em>drosophila melanogaster</em>. 
</div></li></ul></li></ol>

Animal Behavior: Studying Taxis Behavior of Drosophila - Procedure

動物の行動

Making Choice Chambers
ExpandBefore beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the ...

生態学

Cell Structure

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Visualizing Onion and Human Cells
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">In this experiment you will prepare different types of cells from a plant and animal, onion and human respectively, and then visualize them under a microscope. HYPOTHESES: The experimental hypothesis is that the cells will appear different in overall shape and membrane structure, but there will be some shared similar structures, like nuclei, in both cells. The null hypothesis of the experiment is that there will be no difference in structure between the two cell types.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">First, to prepare an animal cell slide, start by pouring 30 mL of distilled water into a beaker.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, use a glass dropper to place 2 - 3 drops of the water onto the center of a clean microscope slide.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Next, take a clean toothpick and scrape the inside of your cheek to gather cells.  CAUTION: Do not scrape your cheeks too aggressively. The scraping should not cause discomfort or bleeding. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Put the end of the toothpick with the cheek cells onto the wetted area of the slide and mix the water and cheek cells together.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Next, add two drops of methylene blue staining solution to the wetted area of the slide and mix it in with a clean toothpick.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Let the mixture sit at room temperature for 3 minutes.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">After 3 minutes have passed, use a glass dropper to add a drop of glycerol to the mixture.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Carefully, place a cover slip over the mix on the slide by first standing one end of the cover slip vertically and aligning it along to one side of the mixture. Then, carefully lower the other end of the cover slip down until the mixture is completely covered.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Finally, remove any excess liquid with blotting paper.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Next, prepare a slide of plant cells by placing five drops of distilled water into a clean watch glass.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Then, with forceps, take a thin strip of onion and place it into the water.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Apply 5 drops of safranin solution to another watch glass.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Now using a pair of forceps transfer the piece of onion from the distilled water into the safranin.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Allow the onion to soak for 30 seconds.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Then, again with forceps, move the onion back into the distilled water.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Now, place 3 drops of glycerol onto the center of a glass microscope slide.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Using the forceps again, transfer the onion into the glycerol on the slide.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Gently place a cover slip over the onion on the slide and blot away any excess liquid with a piece of blotting paper.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Next, you will visualize the slides you have prepared using a compound microscope. First, turn on the scope and set the objective lens to the lowest level of magnification.  NOTE: A compound microscope typically has two levels of magnification.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Place the cheek tissue slide onto the stage of the microscope and bring the cells into focus by adjusting the stage and using the coarse adjustment knob.
</div></li><li data-sub-note-item="1-22"><div class="lab-step">When the cells are in focus, observe the individual cells and draw what you see. Repeat these observations at medium and high magnifications adjusting the focus with the fine adjustment knob. IMPORTANT: Do NOT use the coarse adjustment knob at high magnifications. 
</div></li><li data-sub-note-item="1-23"><div class="lab-step">Next, rotate the nose piece so that the oil lens is almost in place.
</div></li><li data-sub-note-item="1-24"><div class="lab-step">Place a drop of immersion oil on top of the cover slip of the cheek cell slide.
</div></li><li data-sub-note-item="1-25"><div class="lab-step">Use the oil lens to view the cheek cells and record your observations.
</div></li><li data-sub-note-item="1-26"><div class="lab-step">Repeat these steps to view the onion plant cell, moving again from low to medium, high, and oil lenses (steps 20 &#8211; 24).
</div></li><li data-sub-note-item="1-27"><div class="lab-step">Record all of your observations and note the differences you see between animal and plant cells.
</div></li><li data-sub-note-item="1-28"><div class="lab-step">When you are finished, place the cheek cell slide and toothpicks into a diluted bleach solution. Dispose of the cover slips into a glass waste container.
</div></li><li data-sub-note-item="1-29"><div class="lab-step">Finally, turn off the microscope and clean the lenses with lens cleaning paper.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Calculate the total magnification for each of the viewing levels. Remember to account for both the eyepiece magnification and the objective lens magnification. NOTE: Eye piece: 10X magnification, Objective lens: 4X, 10X, and 40X magnification
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Then, identify the structural differences between plant and animal cells using the observations made under the microscope.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Label the nuclei in both cell types and then highlight or note any differences that you see between them.
</div></li></ul></li></ol>

Cell Structure: Visualizing Onion and Human Cells - Procedure

細胞構造

Visualizing Onion and Human Cells
ExpandIn this experiment you will prepare different types of cells from a plant and animal, onion and human ...

基礎

Evolutionary Relationships

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Forming an Evolutionary Hypothesis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: A cladogram is an important tool for forming an evolutionary hypothesis. A cladogram is a tree-shaped chart used to depict the hypothetical genealogical relationships between species. The tips or leaves of the chart represent specific species and the branches of the tree are different lengths. The different lengths represent the degree of change between each of the species. The common ancestor of all of the species that a specific line branches from is located at a node, where the branches intersect. Species that share a node are called a sister group.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">To begin, look at the provided blank cladogram and make a hypothesis about where the assigned animals should be placed on the tree. If a blank cladogram has not been provided please <a target="_blank" href="/files/ftp_upload/10562/Blank_Cladogram.png">download one here</a>.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Next, observe the image of the fossilized animal.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Using the morphology, or physical characteristics, of the fossil, make a hypothesis about where on your cladogram it should be placed. Add a new line or mark to indicate your proposed position for the fossil.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Comparing Gene Sequences Using BLAST
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">NOTE: Historically, cladograms have been constructed through the comparison of morphology. Now, genetic sequences can also be compared between species of interest to construct cladograms. DNA sequences are not usually preserved in fossils, so for this lab you will use the BLAST database to compare the DNA sequences of living species that are closely related to the fossil to thousands of other living species.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Before beginning this lab, your instructor will have downloaded the three preserved gene sequences to a folder on your desktop.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Navigate to the BLAST homepage, which the instructor should have left open in your browser, and click on Saved Strategies from the menu at the top of the page.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Click Open on the Evolutionary_Relationships_Gene1.txt file.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Then, click View to go to the Standard Nucleotide BLAST search page. You should be able to see the DNA sequence in the Query Sequence box at the top-right of the screen.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Scroll to the bottom of the screen and click the BLAST button. Note: It will take a few moments to process and analyze the data. 
</div></li><li data-sub-note-item="2-7"><div class="lab-step">When the data has been processed, a graphic summary will appear.  NOTE: Your query sequence is represented by the blue line at the top of the box. Each of the lines below the blue line represents another sequence in the BLAST database that matches your query. The length and location of these bars represent where and how much of the sequence match up to the query. The color of the bar represents its score, or how identical the sequence is to the query. Below the graphic summary is the Sequences producing significant alignments list, which contains descriptions of the DNA sequences retrieved from the database that most closely align with the query sentence. These are listed in descending order, from the most similar at the top to the least similar at the bottom. On the right, there are several statistics on how closely related each database sequence is to the experimental sequence. The higher the Max, Total, Query Coverage, and Identity scores are, the more similar the query and retrieved sequences are to each other. Similarly, the lower the E value number, the less likely the sequences match was found by random chance and more significantly the alignment is accurate. An E value of 0 indicates a highly significant match.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Click on the name of the description of the most similar alignment listed. This will take you further down the page to the exact DNA sequence alignment between the retrieved sequence and the query sequence.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Click on the Sequence ID number. This will open a new tab with more specific information on the retrieved gene sequence.
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Identify and record the scientific and common names of the organism, which should be listed next to Source.
</div></li><li data-sub-note-item="2-11"><div class="lab-step">Identify and record the protein that the gene codes for, which should be listed next to Definition.
</div></li><li data-sub-note-item="2-12"><div class="lab-step">Close the tab and hit Back to return to the Sequences producing significant alignments list.
</div></li><li data-sub-note-item="2-13"><div class="lab-step">Then, repeat steps 7 &#8211; 9 for the next most similar sequences.
</div></li><li data-sub-note-item="2-14"><div class="lab-step">After collecting several species names, return to the Sequences producing significant alignments list and click Select: All to check all of the boxes next to the names of each listed alignment sequence.
</div></li><li data-sub-note-item="2-15"><div class="lab-step">Click on Distance of tree results to create a phylogram based on the similarity of all of the BLAST result gene sequences to the query gene sequence.  Note: Your query fossil relative sequence will be highlighted in yellow.
</div></li><li data-sub-note-item="2-16"><div class="lab-step">Record your sequence&#8217;s location in relation to the other taxon groups shown in the tree.
</div></li><li data-sub-note-item="2-17"><div class="lab-step">Finally, return to the Saved Strategies tab and upload the next saved gene sequence.
</div></li><li data-sub-note-item="2-18"><div class="lab-step">Query the remaining two fossil relative DNA sequences as previously demonstrated (steps 1 &#8211; 16).
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Data Analysis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">Based on your gene sequence results, come up with a second hypothesis about where your fossil specimen fit in the original cladogram.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Compare this placement with your first hypothesis.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Compare your tree with your classmates&#8217;. If any of your classmates put the fossil on a different branch, ask them how they came to that decision.
</div></li></ul></li></ol>

Evolutionary Relationships: Using BLAST to Test Evolutionary Hypotheses - Procedure

進化的関係

Forming an Evolutionary Hypothesis
ExpandNOTE: A cladogram is an important tool for forming an evolutionary hypothesis. A cladogram is a tree-shaped chart ...

進化論

Energy Dynamics

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Caterpillar Energy Dynamics
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: In this lab you will grow caterpillars in conditions with and without food to examine the transfer of biomass in a typical trophic system.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Weigh and record the wet mass of enough leaves of cabbage to line the bottom of a plastic tub.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, collect two batches of five caterpillars from their cabbage habitat, and weigh and record the wet mass of each batch separately in individual weigh boats. Make sure to tare the balance before each measurement. HYPOTHESES: The experimental hypothesis is that only a fraction of energy will be transferred between the trophic levels of the cabbage and the caterpillars and a significant amount will be lost as waste and heat energy. The null hypothesis is that there will be no significant difference between the energy input from the cabbage, and the obtained energy stored as biomass in the caterpillars.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Place the weighed cabbage and five caterpillars in a plastic tub lined with damp paper towels, leaving the lid slightly cracked open for ventilation, but not wide enough for the animals to escape.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Place the other five caterpillars in a second clean container prepared the same way, but with no cabbage.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">After three days, transfer the caterpillars to new weigh boats, and weigh and record the final wet mass of both groups of caterpillars and the cabbage.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Then place the caterpillar waste, or frass, and cabbage into two separate dishes, and put both dishes into a 37 &#176;C incubator to dry for 48 hours.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Euthanize the weighed caterpillars by putting them into a minus 20 &#176;C freezer for 24 hours.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Then, transfer the dishes to a 37 &#176;C incubator for 48 hours.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">After drying, weigh and record the dry mass of the uneaten cabbage, the two groups of caterpillars, and the frass, and use these data to calculate the percent biomass of the caterpillars.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Finally, discard all of the dried organisms and plates into the hazardous waste bin, and wipe down your workspace with 70% ethanol.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Take a look at the data you collected. Ensure the initial wet mass, the final wet mass, and the final dry mass columns are accurately filled out in your table. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/13/Table_1_Energy_Dynamics.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-2"><div class="lab-step">NOTE: Remember an object&#39;s biomass is equal to its dry mass. Therefore, percent biomass for each group is the final dry mass divided by the final wet mass times 100. For example, obtain the percent biomass of the cabbage by dividing the final dry mass by the final wet mass and multiplying by 100. This means that approximately 15% of the cabbage&#39;s total weight is biomass.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">After this, estimate the initial biomass of the cabbage and caterpillars by multiplying the percent biomass by the initial wet mass, and put the values in this new table. NOTE: Remember, biomass equals dry mass. Therefore, the final dry mass is equal to the final biomass of each group.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">To calculate the approximate initial and final energy in the form of kilocalories within the cabbage, caterpillars, and frass, multiply the biomass values recorded in your table by the conversions, and record the calculated values in the table. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/13/Table_2_Energy_Dynamics.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-5"><div class="lab-step">After this, subtract the initial energy from the final energy to obtain the change in energy for each group.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">NOTE: The negative sign denotes loss in energy, and positive indicates gain.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Using your data table, calculate the energy in kilocalories that the fed caterpillars lost to respiration. The formula is the energy gained from cabbage, which is the positive of the energy lost by cabbage, minus the biomass gained from cabbage, minus the energy lost via frass. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/13/Table_3_Energy_Dynamics.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Then, repeat the same calculation for the unfed group of caterpillars. Make another column in the table and note this down.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Finally, add up all of the energy gained via biomass and cabbage consumption, and the energy lost via frass and respiration for each group of caterpillars. NOTE: For both groups of caterpillars the net energy is zero, meaning that this experiment obeyed the first law of thermodynamics.
</div></li></ul></li></ol>

Studying Energy Dynamics and Productivity - Procedure

エネルギーダイナミクス

Caterpillar Energy Dynamics
ExpandNOTE: In this lab you will grow caterpillars in conditions with and without food to examine the transfer of biomass in a ...

Microbial and Fungal Diversity

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Examining Microbial Colony Structures
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">To begin, collect your allocated culture plates and then remove the Parafilm and lid from one of them.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Place the uncovered plate under a dissecting microscope and then observe the individual communities within each quadrant of the plate.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">As the colonies are identified, fill out the observed colony properties in the appropriate column in the table.  <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/28/Table_1_Microbial_diversity.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Then, repeat the observations for each of the other two bacterial species.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">To perform Gram staining of your three bacterial species, first label the ends of three microscope slides with the initials of each bacteria species, your initials, and the date. HYPOTHESES: In this experiment, the experimental hypothesis might be that it is possible to elucidate different bacterial species and shapes using Gram staining, and that Gram-positive bacteria will stain purple with crystal violet whereas Gram-negative bacteria will appear pink due to the safranin counterstain. The null hypothesis could be that all of the bacterial types will retain both stains equally, and staining will not help elucidate their species or shape.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">To begin the first stain, attach a clip to the slide for ease of handling. For each bacterial smear, remember to be sure to use a cleaned and flame-sterilized inoculating loop.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Place two loopfuls of sterile distilled water onto the center of the slide.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">After sterilizing the loop again, cool the loop by touching an uninoculated portion of the agar several times.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Then, remove a small amount of culture from an isolated colony and mix it with the water on the slide.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Allow the slide to dry at room temperature and heat-fix the smear by quickly passing it through a flame.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Once dry, pipette several drops of crystal violet onto the slide and let it sit for two to three minutes.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Carefully rinse the slide with distilled water by aiming the direct flow towards the top of the slide, allowing the water to gently flow down. Do not aim the water flow directly at the smear.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Next, cover the slide with Gram&#39;s iodine, leave it to sit again for two minutes, and then gently rinse with distilled water.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Decolorize the slide with 95% ethanol until stain no longer washes away.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Immediately, rinse the slide with distilled water. This will limit over-decolorizing.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Then, add several drops of safranin counterstain and leave for 30 s. This will stain any Gram-negative cells present.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Gently rinse the slide with distilled water and blot dry with absorbent paper.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">After staining the other two slides in the same manner (steps 6 &#8211; 17), observe each with a microscope.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Use a low power objective first to make coarse adjustments. When you find an ideal section, move on to the higher magnifications.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">After further imaging and adjusting the smear with a medium power objective, add immersion oil directly to the smear. NOTE: The oil is needed for high power objectives that will provide the best micrographs.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Now, use colored pencils to draw the observed bacteria in the appropriate magnification circles and fill in the observed characteristics in the appropriate column, noting the bacteria&#39;s shape and whether it is Gram-positive, identified by darker purple staining, or Gram-negative, identified with pink staining. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/28/Table_2_Microbial_diversity.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="1-22"><div class="lab-step">Finally, repeat the observation, drawing, and characterization for the other two stained bacterial slides.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Examining Fungal Structures
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Remove the <em>S. cerevisiae</em> plate from the incubator and place a drop of water onto a microscope slide.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Using a sterilized inoculating loop, smear a film of yeast into the drop of water and place a cover slip over the slide.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Place the slide under the microscope at the lowest magnification, increasing the magnification to the oil immersion setting to see the individual yeast cells.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Observe the general shape and structure of the yeast and identify any cells that are undergoing asexual reproduction by budding.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Now, draw the cells in the appropriate magnification circles.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">When you are done observing the yeast, replace the <em>S. cerevisiae</em> slide with a prepared Ascomycetes apothecium slide and set the microscope to the lowest magnification.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Using colored pencils, draw the structures at low and high magnifications, including the asci and ascospores.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Finally, place a button mushroom, <em>Agaricus bisporus</em>, under the dissecting microscope and draw the features, including the pileus, or cap, the gills, and the stipe, or stalk.
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">Using the coloring of the bacteria recorded in the table, determine which species are Gram-positive and which are Gram-negative.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Then, look at the shapes recorded in the table to determine which bacterial species are bacillus, coccus, or spirillum.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Next compare your illustrations of the yeast cells to your illustrations of the bacterial cells. NOTE: Yeast from the Ascomycetes phylum, such as <em>S. cerevisiae</em>, can reproduce asexually, which can be observed through the budding of the cells under a microscope.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Record any observations of yeast cells budding.  NOTE: Ascomycetes can also reproduce sexually via mitosis and haploid spore formation.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">Record any observations of spore or asci formation you observed in the table.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">NOTE: Fungus from the Basidiomycota phylum exhibit clearly observable gills under the pileus.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Record any fungal species that demonstrated gills under the pileus.
</div></li></ul></li></ol>

Microbial Colony and Fungal Diversity - Procedure

微生物と真菌の多様性

Examining Microbial Colony Structures
ExpandTo begin, collect your allocated culture plates and then remove the Parafilm and lid from one of them.
Place ...

Group Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">The Hawk-Dove Game
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: In this activity, you will play the hawk and dove game with a single partner and then with multiple partners to observe hypothetical costs and benefits of the antagonist or cooperative behavior respectively. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Before the activity starts, review the cost-benefit table so that you understand how to score the game. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/33/Table_1_Group_behavior.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-3"><div class="lab-step">HYPOTHESES: The experimental hypothesis for this exercise could be that the dove strategy will become more frequent between repeated partners, and the hawk strategy will become more frequent when interactions are with a variety of partners. The null hypothesis could be that there will be no change in strategy over time with repeat or different partner combinations. NOTE: Benefit can be determined by looking at the left column and choosing the row that corresponds to the card you played. The box that corresponds to the choice of your partner can be found in the top row. For the purposes of this game, B equals four and C equals three. So depending on the cards played, player one here, which is you, would gain a score of two, four, zero or one half. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Collect a set of two game cards. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Take out the cards labeled hawk and dove and place them face down on the table or conceal them in your hands. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">When the instructor gives the signal show either of the two cards to the student sitting across from you. Try to strategize how to receive the highest benefit from every interaction on your own but do not communicate with your partner. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">In the Single Partner Recording Table (Table 2) provided by your instructor, note the cards played as well as the benefit you received for that round.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Repeat showing cards to the same partner and determining benefit on your instructor&#39;s signal for a total of 15 rounds.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">At the end of those rounds, the student with the highest total benefit value was determined to be the &#8220;winner&#8221;, or the most fit.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">As a class, determine the percentages of hawks and doves played as well as the average benefit received for each round, using this formula: Class average benefit=(sum total benefit)/(number of players)
</div></li><li data-sub-note-item="1-11"><div class="lab-step">For the second game, and then for each round of play, one row of students should rotate to their right, leaving all players with a new partner.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Continue playing for 15 rounds or until students end up back in their starting positions, recording the data in the Multiple Partner Recording Table (Table 3) given to you by your instructor.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">For each round, determine the percentages of hawks and doves played that round, as well as the average benefit received.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Cheating and Cooperation Exercise
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">NOTE: In this activity, you will exchange benefits, represented by colored or similar items, with your classmates. In this simulation, a cheater is defined as a person who gives fewer benefits than they receive. During this activity, you will observe the frequency of cheating behavior over time. 
</div></li><li data-sub-note-item="2-2"><div class="lab-step">HYPOTHESES: The experimental hypothesis is that cheaters will receive fewer benefits over time and cooperators will continue to provide equal benefits to one another. The null hypothesis is that the frequency of cheaters and cooperators does not change over time. 
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Each person should collect beads of one color to represent a tangible benefit, as well as one paper bag and a three-ring binder.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Get into a group of three so that all members have objects of the same color.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Now find another group with a different color to pair with. In each round, partners will exchange benefits without knowing what they are receiving from their partner and without discussion within their group.  NOTE: Benefits of a different color from your starting color are worth twice as much.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Turn face to face with a member from the other group while still being able to conceal the objects in your possession.  TIP:<strong> </strong>Setting up a screen using a notebook or sitting behind a desk can be helpful here.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">When given a signal from the instructor, place zero to two benefits into the paper bag and pass it to your partner.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Simultaneously, receive the bag from your partner and then remove the benefits from the bag.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Make a note of how many benefits you gave away and how many you received in the Cheating and Cooperation Table (Table 4) provided by your instructor.
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Turn to a new member from the other group and repeat the exchange.
</div></li><li data-sub-note-item="2-11"><div class="lab-step">Rotate through all of the members of the other group for as many rounds as the instructor determines - which will not be revealed until the game ends so as not to alter player behavior.
</div></li><li data-sub-note-item="2-12"><div class="lab-step">Once the game has ended, note for each round in the cheating and cooperation table whether you gave more than your partner, received more from them or if you gave the same amount.
</div></li><li data-sub-note-item="2-13"><div class="lab-step">Now total up all of the benefits in your possession, with benefits you&#39;ve received from the other group being worth twice as much.
</div></li><li data-sub-note-item="2-14"><div class="lab-step">For each round, the whole class should total up the number of cheaters - with cheaters defined as those who gave less than they received.
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">For both the single partner hawk-dove game and the multiple partners hawk-dove game, use the whole class data to plot the percentages as two separate lines - one for the percentage of hawks, and one for the percentage of doves, for each of the 15 rounds.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Take note of whether the cards played changed as more rounds were played.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Manipulate the values for B and C to see if you can find the point at which values of B and C would render the hawk strategy no longer effective (this would be the point when there is no benefit to choosing the hawk strategy over always choosing the dove strategy).
</div></li><li data-sub-note-item="3-4"><div class="lab-step">As a class, use the data from the cheating and cooperation activity to make a graph showing the percentage of rounds each individual player cheated versus the amount of benefits they ended with.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">Consider whether it is better to be a cheater or a cooperator in this scenario and discuss as a class what makes this scenario different from the hawk-dove game.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Now, use the class data to graph the percentage of cheaters against the number of rounds, and look for any trends over time.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Consider which type of strategy would most likely evolve in a setting where partners interact repeatedly.
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Then, note which tactic might be beneficial for a species that relies on cooperation. 
</div></li><li data-sub-note-item="3-9"><div class="lab-step">Discuss as a class what would likely happen if you increased or decreased the relative value of the benefits you receive.
</div></li></ul></li></ol>

Group Behavior: Hawk-Dove Game and Trading Exercise - Procedure

グループの動作

The Hawk-Dove Game
ExpandNOTE: In this activity, you will play the hawk and dove game with a single partner and then with multiple partners to observe ...

Optimal Foraging

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Simulating Foraging with Artificial Habitats and Prey
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: The foragers will hunt for prey represented by pinto beans in four buckets of rice with varying prey densities. Without knowing what these densities are, foragers must obtain as many prey items as possible in as little time as possible. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">HYPOTHESES: In this experiment, the experimental hypothesis could be that foragers will catch the most prey in the higher prey density bucket and also spend the most time foraging there.  The null hypothesis would then be that foragers will catch an equal number of prey in each bucket and that foragers will spend an equal amount of time foraging in each patch. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">To begin the foraging activity, record the names and role of each participant at the top of the student data collection sheet.  NOTE: Before starting the experiment, the forager is allowed to become familiar with the foraging process &#8211; the following steps are a practice round. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">The forager should kneel or sit in front of the average density bucket. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Once the timer says start, the forager may begin looking for the pinto beans representing the prey. The forager can spend as much time as they like foraging in this bucket. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Once a prey item is located, the forager must signal that one has been found and place the prey in the cup next to the bucket.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Once they believe they have acquired most of the prey in the patch, they should tell the timer to stop the time and the practice round is over. 
</div></li><li data-sub-note-item="1-8"><div class="lab-step">To begin the simulation proper, the forager should sit or kneel in front of bucket A. 
</div></li><li data-sub-note-item="1-9"><div class="lab-step">The timer must be ready to start the stopwatch. 
</div></li><li data-sub-note-item="1-10"><div class="lab-step">The recorder should be ready to record the time each prey item is located, in addition to the time that the forager arrived at and left each bucket. 
</div></li><li data-sub-note-item="1-11"><div class="lab-step">When all parties are ready, the timer should start the stopwatch and say &#8220;start&#8221;,  and the forager should begin foraging. NOTE: The stopwatch will run through the rest of the round for buckets B and C.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">As the forager signals finding pinto beans and places them in the cup next to the bucket, the timer should tell the recorder the time.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">The recorder should then write the time in the student data collection sheet.  <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/34/Table_1_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Once the forager has decided to move on to the next bucket, they should tell the timer &#8220;done&#8221;, and begin moving to the next patch. 
</div></li><li data-sub-note-item="1-15"><div class="lab-step">The recorder should record the time the forager left and the time they arrived at bucket B in the student data collection sheet.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Repeat the same procedure for buckets B and C. Once the forager has completed the activity, it is time for the next forager to begin using the same procedure. 
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Before performing any data analysis, review the data collection sheet and compile your individual data for captured prey, foraging time, and travel time for each bucket in your student calculations table. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/34/Table_2_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-2"><div class="lab-step">After this, calculate your individual capture rate for each bucket by dividing the number of prey captured by the sum of the foraging time and travel time and record these values in your table. Individual capture rate =  Number of prey captured / (foraging time + travel time)
</div></li><li data-sub-note-item="2-3"><div class="lab-step">To calculate your Giving-Up-Time or a GUT for each bucket, subtract the time that the last prey item was acquired from the time you left the bucket.  GUT = time forager left bucket  -  time last prey item acquired
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Next, calculate the mean GUT for your foraging group and record the values in your table.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Finally, calculate your scaled GUT for each bucket by dividing the bucket GUT by your group&#39;s mean GUT. Scaled GUT =  Bucket GUT / Group mean GUT NOTE: The scaled GUT will allow class data to be pooled later on without differences in individual foragers skewing the data. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">The instructor should now compile the data into the classroom spreadsheet.  <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/34/Table_3_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Plot a bar graph of the average number of prey collected in each bucket. On the x-axis, A should represent the low prey density bucket, B should represent the medium prey density bucket, and C the high prey density bucket. Plot the y-axis as the number of prey items caught. 
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Next, plot the graph of the class average scaled GUT, where the x-axis represents the buckets with varying levels of prey density and the y-axis shows the values for the average scaled GUT. 
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Plot a third graph of the average time spent foraging in each bucket. 
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Now review the Marginal Value Theorem (MVT) from the concepts video and examine the three graphs that you generated from your class data. Take note of whether the graphs conform to the predictions of MVT. 
</div></li></ul></li></ol>

Optimal Foraging: Foraging with Artificial Habitats and Prey - Procedure

最適な採餌

Simulating Foraging with Artificial Habitats and Prey
ExpandNOTE: The foragers will hunt for prey represented by pinto beans in four buckets of rice with ...

Macromolecules

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Identifying Macromolecules with Indicator Solutions
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">HYPOTHESES: In this activity, the experimental hypothesis might be that the addition of an indicator dye to each test solution will result in a color change if the test solution contains the macromolecule of interest. The null hypothesis might be that the addition of an indicator dye will not result in a color change in any of the test solutions.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Place 16 clean test tubes in a tube rack in four rows of four tubes and label each row A through D and each column 1 - 4.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Label each test tube with its corresponding position in the test tube rack.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">After this, stir solution A thoroughly and use a pipette to add 4 mL of solution A to each tube in Row A.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Next, stir solution B until it is well mixed and use a new pipette to add 4 mL of solution B to each tube in Row B.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">After stirring solution C thoroughly, add 4 mL of solution C to each tube in Row C.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Then add 4 mL of soybean-derived vegetable oil to each tube in Row D.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">When all of the tubes have been filled with their respective test solutions, add 200 mL of water to a 400 mL beaker on a hotplate and set the hotplate to high.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">To perform the Benedict&#39;s Test, add 2 mL of Benedict&#39;s reagent to test tubes A1, B1, C1, and D1 while the water is warming.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Observe the initial color of the tubes.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">When the water begins to boil, transfer each test tube to the beaker and heat the tubes in the boiling water bath for 3 - 5 minutes.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Then, record the final color of each of the tubes in the appropriate cells of the table and turn off the hotplate. <a href="https://jove.unicartagenaproxy.elogim.com/CDNSource/lm/labs/22/Table_1_Macromolecules.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-13"><div class="lab-step">To perform an Iodine-Potassium-Iodide Test, first observe the color of the solutions in the test tubes in column 2.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Then, add 1 mL of iodine potassium iodide reagent to tubes A2 to D2 and record the final color change in each of the tubes.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">For the Sudan IV Test, observe and record the color of the solutions in the test tubes in column 3.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Then, add 2 - 3 drops of Sudan IV reagent to test tubes A3 through D3 and record the color change, if any, in each tube.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">For the Biuret Test, observe the color of the solutions in the test tubes in column 4.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Then, add 1 mL of Biuret reagent to test tubes A4 through D4 and record the final color in each of the tubes.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Using the results from the indicator tests, each of the four original solutions can be identified as a sugar, starch, lipid, or protein. Refer to the Concepts video to help you determine which tubes contain which macromolecules.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">First, look at the results from the Benedict&#39;s Test. Determine which of the test solutions contain sugar based on your results.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Next, create a bar graph with your five plant species listed on the x-axis and the surface area in cm indicated on the y-axis.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Next, look at the results from the Iodine-Potassium-Iodide Test. Determine which of the test solutions contain starch.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Now, review the results from the Sudan IV Test. Using these observations, determine if any of the test solutions contain lipids.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Finally, look at the results from the Biuret Test. Determine if any of the test solutions contain proteins.
</div></li></ul></li></ol>

Macromolecules: Identification Using Indicator Solutions - Procedure

高分子

Identifying Macromolecules with Indicator Solutions
ExpandHYPOTHESES: In this activity, the experimental hypothesis might be that the addition of an ...