Funding was provided in part by BU and the NIH R01CA149561. The authors wish to thank the electrospinning/electrospraying team including Stefan Yohe, Eric Falde, Joseph Hersey, and Julia Wang for their helpful discussions and contributions to the preparation and characterization of superhydrophobic biomaterials.

The authors declare that they have no competing financial interests.

הגישה שלנו לבניית חומרי הידרופובי מפולימרים ביו-רפואיים משלבת כימיה פולימר סינתטית עם טכניקות עיבוד פולימרים של electrospinning וelectrospraying. טכניקות אלה מספקים גם סיבים או חלקיקים, בהתאמה. באופן ספציפי, חומרים-הידרופובי polycaprolactone ופולי (-glycolide שיתוף lactide-) מבוסס מוכנים באמ...

משטחי הידרופובי בדרך כלל מסווגים כמציגים קשר ברור מים זוויות גדולות מ -150 מעלות עם hysteresis זווית מגע נמוך. משטחים אלה מיוצרים על ידי החדרת חספוס פני השטח גבוה על חומרי אנרגיית משטח נמוכים להקמת ממשק אוויר נוזלי מוצקה וכתוצאה מכך שמתנגד הרטבת 1-6. בהתאם לשיטת הייצור, משטחים דקים או רב שכבתיים סופר-הידרופובי, ציפויי מצע הידרופובי רב שכבתיים, או מבנים-הידרופובי אפילו בתפזורת יכולה להיות מוכן. דחיית מים קבועים או חצי קבוע זה רכוש שימושי שמועסק להכין משטחי ניקוי עצמי 7, מכשירי microfluidic 8, אנטי עכירות משטחי תא / חלבון 9,10, משטחי הפחתת גרירת 11, ומכשירי משלוח הסמים 12 15. לאחרונה, חומרים-הידרופובי גירויים מגיבים מתוארים בי שאינם רטוב למדינה רטובה מופעל על ידי כימי, פיזי, או רמזים סביבתיים (למשל, אור, pH, טמפרטורה, אולטרסאונד, ולהחיל פוטנציאל חשמלי / הנוכחי) 14,16-20, וחומרים אלה מוצאים שימוש ליישומים נוספים 21-25. משטחי הידרופובי סינטטיים הראשונים שהוכנו על ידי טיפול במשטחי חומר עם methyldihalogenosilanes 26, והיו בעל ערך המוגבל ליישומים ביו-רפואיים, כחומרים המשמשים לא היו מתאימים לשימוש בvivo. במסמך זה אנו מתארים את ההכנה של פני השטח וחומרי הידרופובי בתפזורת מפולימרים ביולוגית. הגישה שלנו כרוכה electrospinning או electrospraying תערובת פולימר המכילה פוליאסטר מתכלה, ביולוגית אליפטי כמרכיב העיקרי, מסומם עם קופולימר הידרופובי מורכב מפוליאסטר ופולי (קרבונט גליצרול)-שונה stearate 27-30. טכניקות הייצור לספק את חספוס פני השטח המשופר ונקבובי ובבתוך FibeRS או החלקיקים, בהתאמה, בעוד שהשימוש בdopant קופולימר מספק פולימר אנרגיית משטח נמוך שמשתלב עם פוליאסטר ויכולים להיות electrospun או electrosprayed 27,31,32 ביציבות. פוליאסטר aliphatic מתכלה כגון פולי (חומצה לקטית) (PLA), פולי (חומצה גליקולית) (PGA), פולי (חומצה לקטית -glycolic שיתוף דיאלקטרי) (PLGA), וpolycaprolactone (PCL) הם פולימרים המשמשים במכשירים שאושרו-קליני ובולט במחקר ביו-רפואי בגלל חומרים שאינם רעיל, פריקות ביולוגית, והקלה של סינתזה 33. PGA וPLGA לראשונה במרפאת כתפרי bioresorbable בשנתי ה -1960 ו -1970 המוקדמות, בהתאמה 34-37. מאז, פולי אלה (חומצות הידרוקסיות) עובדו למגוון רחב של גורמי צורה ספציפי ליישום אחרים, כגון מיקרו 38,39 וחלקיקי 40,41, הוופלים / דיסקים 42, משתלב 27,43, קצף 44, ו סרטים 45 </sup&gt;. פוליאסטר אליפטי, כמו גם פולימרים אחרים בעלי עניין ביו-רפואי, ניתן electrospun לייצר מבני ננו או רשת מיקרופייבר בעל שטח פנים גבוה ונקבובי, כמו גם חוזק מתיחה. טבלה 1 רשימות electrospun הפולימרים סינטטיים עבור יישומים ביו-רפואיים שונים ו המקבילים אזכור. Electrospinning וelectrospraying טכניקות מהירות ומסחרית-ניתן להרחבה. שתי טכניקות דומות אלה מסתמכות על יישום מתח גבוה (דחייה אלקטרוסטטית) כדי להתגבר על המתח של פתרון פולימר משטח / להמס בהתקנת משאבת מזרק כפי שהוא מכוון ליעד מעוגן 46,47. כאשר טכניקה זו משמשת בשילוב עם פולימרים אנרגיית פני השטח נמוכים (פולימרים הידרופובי כגון פולי (monostearate -glycerol שיתוף caprolactone-)), בסופר-הידרופוביות תערוכת חומרים שהתקבלו. כדי להמחיש גישת עיבוד זה בכלל סינטטי וחומריםלבניית חומרי הידרופובי מפולימרים ביו-רפואיים, אנו מתארים את הסינתזה של polycaprolactone- הידרופובי ופולי (-glycolide שיתוף lactide-) חומרים מבוססי כדוגמאות מייצגות. פולי בהתאמה dopants קופולימר (monostearate -glycerol שיתוף caprolactone-) ופולי (monostearate -glycerol שיתוף lactide-) מסונתזים ראשון, ולאחר מכן מעורבב עם polycaprolactone ופולי (-glycolide שיתוף lactide-), בהתאמה, ובסופו electrospun או electrosprayed. חומרי כתוצאה מכך הם מתאפיינים בgoniometry הדמיה וזווית מגע SEM, ונבדקו במבחנה ובהתאמה הביולוגית vivo. לבסוף, הרטבה בתפזורת באמצעות משתלב הידרופובי תלת ממדים נבחנה באמצעות טומוגרפיה microcomputed חומר ניגוד.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Silicone oil</td>
			<td>Sigma-Aldrich</td>
			<td>85409</td>
			<td></td>
		</tr>
		<tr>
			<td>Cis-2-Phenyl-1,3-dioxan-5-ol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">13468</td>
			<td></td>
		</tr>
		<tr>
			<td>Benzyl bromide</td>
			<td>Sigma-Aldrich</td>
			<td>B17905</td>
			<td>Toxic, lacrymator/eye irritant, use in chemical fume hood</td>
		</tr>
		<tr>
			<td>Potassium hydroxide</td>
			<td>Sigma-Aldrich</td>
			<td align="right">221473</td>
			<td>Corrosive</td>
		</tr>
		<tr>
			<td>Rotary evaporator</td>
			<td>Buchi</td>
			<td>R-124</td>
			<td></td>
		</tr>
		<tr>
			<td>High-vacuum pump</td>
			<td>Welch</td>
			<td align="right">8907</td>
			<td></td>
		</tr>
		<tr>
			<td>Nitrogen, ultra high purity</td>
			<td>Airgas</td>
			<td>NI UHP300</td>
			<td>Compressed gas</td>
		</tr>
		<tr>
			<td>Tetrahydrofuran, stabilized with BHT</td>
			<td>Pharmaco-Aaper</td>
			<td align="right">346000</td>
			<td>Flammable. Dried through column of XXX</td>
		</tr>
		<tr>
			<td>Dichloromethane</td>
			<td>Pharmaco-Aaper</td>
			<td align="right">313000</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Separatory funnel (1 L)</td>
			<td>Fisher Scientific</td>
			<td>13-678-606</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium sulfate</td>
			<td>Sigma-Aldrich</td>
			<td align="right">239313</td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol, absolute</td>
			<td>Pharmaco-Aaper</td>
			<td>111USP200</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Buchner funnel</td>
			<td>Fisher Scientific</td>
			<td>FB-966-F</td>
			<td></td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Pharmaco-Aaper</td>
			<td>339000ACS</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Sigma-Aldrich</td>
			<td align="right">320331</td>
			<td>Corrosive. Diluted to 2N in distilled water.</td>
		</tr>
		<tr>
			<td>Ethyl chloroformate, 97%</td>
			<td>Sigma-Aldrich</td>
			<td align="right">185892</td>
			<td>Toxic, flammable, harmful to environment</td>
		</tr>
		<tr>
			<td>Triethylamine (anhydrous)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">471283</td>
			<td>Toxic, flammable, harmful to environment</td>
		</tr>
		<tr>
			<td>Diethyl ether</td>
			<td>Pharmaco-Aaper</td>
			<td>373ANHACS</td>
			<td>Highly flammable. Purified through XXX column.</td>
		</tr>
		<tr>
			<td>3,6-Dimethyl-1,4-dioxane-2,5-dione (D,L-lactide)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">303143</td>
			<td></td>
		</tr>
		<tr>
			<td>Tin (II) ethylhexanoate</td>
			<td>Sigma-Aldrich</td>
			<td>S3252</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>&#949;-caprolactone (97%)</td>
			<td>Sigma-Aldrich</td>
			<td align="right">704067</td>
			<td></td>
		</tr>
		<tr>
			<td>Toluene, anhydrous</td>
			<td>Sigma-Aldrich</td>
			<td align="right">244511</td>
			<td>Flammable, toxic.</td>
		</tr>
		<tr>
			<td>Glass syringe</td>
			<td>Hamilton Company</td>
			<td>1700-series</td>
			<td></td>
		</tr>
		<tr>
			<td>Deuterated chloroform</td>
			<td>Cambridge Isotopes Laboratories, Inc.</td>
			<td>DLM-29-10</td>
			<td>Toxic</td>
		</tr>
		<tr>
			<td>Nuclear magnetic resonance instrument</td>
			<td>Varian</td>
			<td>V400</td>
			<td></td>
		</tr>
		<tr>
			<td>Palladium on carbon catalyst</td>
			<td>Strem Chemicals, Inc.</td>
			<td>46-1707</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogenator unit</td>
			<td>Parr</td>
			<td align="right">3911</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogenator shaker vessel</td>
			<td>Parr</td>
			<td>66CA</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogen</td>
			<td>Airgas</td>
			<td>HY HP300</td>
			<td>Highly flammable.</td>
		</tr>
		<tr>
			<td>Diatomaceous earth</td>
			<td>Sigma-Aldrich</td>
			<td align="right">22140</td>
			<td></td>
		</tr>
		<tr>
			<td>2H,2H,3H,3H-perflurononanoic acid</td>
			<td>Oakwood Products, Inc.</td>
			<td align="right">10519</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Stearic acid</td>
			<td>Sigma-Aldrich</td>
			<td>S4751</td>
			<td></td>
		</tr>
		<tr>
			<td>N,N&#8217;-dicyclohexylcarbodiimide</td>
			<td>Sigma-Aldrich</td>
			<td>D80002</td>
			<td>Toxic, irritant.</td>
		</tr>
		<tr>
			<td>4-(dimethylamino) pyridine</td>
			<td>Sigma-Aldrich</td>
			<td align="right">107700</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Hexanes</td>
			<td>Pharmaco-Aaper</td>
			<td>359000ACS</td>
			<td>Toxic, flammable.</td>
		</tr>
		<tr>
			<td>Gel permeation chromatography (GPC) system</td>
			<td>Rainin</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>GPC column</td>
			<td>Waters</td>
			<td>WAT044228</td>
			<td></td>
		</tr>
		<tr>
			<td>Differential scanning calorimeter</td>
			<td>TA Instruments</td>
			<td>Q100</td>
			<td></td>
		</tr>
		<tr>
			<td>Chloroform</td>
			<td>Pharmaco-Aaper</td>
			<td>309000ACS</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>N,N-dimethylformamide</td>
			<td>Sigma-Aldrich</td>
			<td align="right">227056</td>
			<td>Toxic, flammable.</td>
		</tr>
		<tr>
			<td>Polycaprolactone, MW 70-90 kg/mol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">440744</td>
			<td></td>
		</tr>
		<tr>
			<td>Poly(lactide-co-glycolide), MW 136 kg/mol</td>
			<td>Evonik Industries</td>
			<td>LP-712</td>
			<td></td>
		</tr>
		<tr>
			<td>10-mL glass syringe</td>
			<td>Hamilton Company</td>
			<td align="right">81620</td>
			<td></td>
		</tr>
		<tr>
			<td>18 AWG blunt needle</td>
			<td>BRICO Medical Supplies</td>
			<td>BN1815</td>
			<td></td>
		</tr>
		<tr>
			<td>Electrospinner enclosure box</td>
			<td>Custom-built</td>
			<td>N/A</td>
			<td>Made of acrylic panels</td>
		</tr>
		<tr>
			<td>High voltage DC supply</td>
			<td>Glassman High Voltage, Inc.</td>
			<td>PS/EL30R01.5</td>
			<td>High voltages, electrocution hazard</td>
		</tr>
		<tr>
			<td>Linear (translating) stage</td>
			<td>Servo Systems Co.</td>
			<td>LPS-12-20-0.2</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Programmable motor &#38; power supply</td>
			<td>Intelligent Motion Systems, Inc.</td>
			<td>MDrive23 Plus</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>24V DC motor &#38; power supply</td>
			<td>McMaster-Carr</td>
			<td>6331K32</td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Aluminum collector drum</td>
			<td>Custom-built</td>
			<td></td>
			<td>Optional</td>
		</tr>
		<tr>
			<td>Syringe pump</td>
			<td>Fisher Scientific</td>
			<td>78-0100I</td>
			<td></td>
		</tr>
		<tr>
			<td>Inverted optical microscope</td>
			<td>Olympus</td>
			<td>IX70</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning electron microscope</td>
			<td>Carl Zeiss</td>
			<td>Supra V55</td>
			<td></td>
		</tr>
		<tr>
			<td>Conductive copper tape</td>
			<td>3M</td>
			<td align="right">16072</td>
			<td></td>
		</tr>
		<tr>
			<td>Aluminum SEM stubs</td>
			<td>Electron Microscopy Sciences</td>
			<td align="right">75200</td>
			<td></td>
		</tr>
		<tr>
			<td>Contact angle goniometer</td>
			<td>Kruss</td>
			<td>DSA100</td>
			<td></td>
		</tr>
		<tr>
			<td>Propylene glycol</td>
			<td>Sigma-Aldrich</td>
			<td>W294004</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Ethylene glycol</td>
			<td>Sigma-Aldrich</td>
			<td align="right">324558</td>
			<td>Toxic.</td>
		</tr>
		<tr>
			<td>Ioxaglate</td>
			<td>Guerbet</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Fetal bovine serum</td>
			<td>American Type Culture Collection</td>
			<td>30-2020</td>
			<td></td>
		</tr>
		<tr>
			<td>Micro-computed tomography instrument</td>
			<td>Scanco</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Image analysis software (Analyze)</td>
			<td>Mayo Clinic</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Tensile tester</td>
			<td>Instron</td>
			<td align="right">5848</td>
			<td></td>
		</tr>
		<tr>
			<td>Micrometer</td>
			<td>Multitoyo</td>
			<td>293-340</td>
			<td></td>
		</tr>
		<tr>
			<td>Calipers</td>
			<td>Fisher Scientific</td>
			<td>14-648-17</td>
			<td></td>
		</tr>
	</tbody>
</table>

fabricating superhydrophobic polymeric materials for biomedical applications

חומרים-הידרופובי, עם משטחים בעלי מדינות רטובות שאינן קבועות או metastable, הם עניין למספר היישומים ביו-רפואיים ותעשייתיים. כאן אנו מתארים כיצד electrospinning או electrospraying תערובת פולימר המכילה פוליאסטר מתכלה, ביולוגית אליפטי (למשל, polycaprolactone ופולי (שיתוף -glycolide lactide-)), כמרכיב המרכזי, מסומם עם קופולימר הידרופובי מורכב מפוליאסטר וstearate- פולי שונה (קרבונט גליצרול) מקנה ביולוגי-הידרופובי. טכניקות הייצור של electrospinning או electrospraying לספק חספוס פני השטח המשופר ונקבובי ובבתוך הסיבים או החלקיקים, בהתאמה. השימוש בdopant קופולימר אנרגיית משטח נמוך שמשתלב עם פוליאסטר ויכולים להיות electrospun או electrosprayed יציבות מקנה חומרי הידרופובי אלה. פרמטרים חשובים כגון גודל סיבים, הרכב dopant קופולימר ו / או שיתוףncentration, וההשפעות שלהם על יכולת רטיבות הם דנו. זה שילוב של כימיה של פולימרים והנדסת תהליך מאפשר גישה תכליתית לפתח חומרים ספציפיים ליישום תוך שימוש בטכניקות להרחבה, אשר עשויה להכליל לכיתה רחבה יותר של פולימרים עבור מגוון רחב של יישומים.

באמצעות סדרה של שינויים כימיים, 2-אחד 5-benzyloxy-1,3-dioxan-מונומר פחמה הפונקציונלי הוא מסונתז כלבנים גבישים (איור 1 א) טוב. 1 H NMR מאשר את המבנה (איור 1) וספקטרומטר מסה ו ניתוח יסודות לאשר את הרכב. זה מוצק אז copolymerized עם או D, -lactide L או ε-caprolactone באמצעות...

Watch this Scientific Journal Video about Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications at JoVE.com

Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Two- and three-dimensional superhydrophobic polymeric materials are prepared by electrospinning or electrospraying biodegradable polymers blended with a lower surface energy polymer of similar composition.

בודה חומרים פולימריים עבור יישומים ביו-הידרופובי

Superhydrophobic materials, with surfaces possessing permanent or metastable non-wetted states, are of interest for a number of biomedical and industrial ...

fabricating-superhydrophobic-polymeric-materials-for-biomedical

Universidad de Cartagena UDEC

Research

Education

JoVE Core

JoVE Journal

Organic Chemistry

Bioengineering

Unit 1

Synthetic Polymers

SCIENTISTS IN ACTION

19.0K Views.  Boston University. Two- and three-dimensional superhydrophobic polymeric materials are prepared by electrospinning or electrospraying biodegradable polymers blended with a lower surface energy polymer of similar composition. 

Video: Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Graphene Coatings for Biomedical Implants

Atomically smooth graphene as a surface coating has potential to improve implant properties. This demonstrates a method for coating nitinol alloys with nanometer thick layers of graphene for applications as a stent material. Graphene was grown on copper substrates via chemical vapor deposition and then transferred onto nitinol substrates. In order to understand how the graphene coating could change biological response, cell viability of rat aortic endothelial cells and rat aortic smooth muscle cells was investigated. Moreover, the effect of graphene-coatings on cell adhesion and morphology was examined with fluorescent confocal microscopy. Cells were stained for actin and nuclei, and there were noticeable differences between pristine nitinol samples compared to graphene-coated samples. Total actin expression from rat aortic smooth muscle cells was found using western blot. Protein adsorption characteristics, an indicator for potential thrombogenicity, were determined for serum albumin and fibrinogen with gel electrophoresis. Moreover, the transfer of charge from fibrinogen to substrate was deduced using Raman spectroscopy. It was found that graphene coating on nitinol substrates met the functional requirements for a stent material and improved the biological response compared to uncoated nitinol. Thus, graphene-coated nitinol is a viable candidate for a stent material.

Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.

ציפוי גרפן עבור שתלים ביו

Atomically smooth graphene as a surface coating has potential to improve implant properties. This demonstrates a method for coating nitinol alloys with ...

Designing Silk-silk Protein Alloy Materials for Biomedical Applications

Fibrous proteins display different sequences and structures that have been used for various applications in biomedical fields such as biosensors, nanomedicine, tissue regeneration, and drug delivery. Designing materials based on the molecular-scale interactions between these proteins will help generate new multifunctional protein alloy biomaterials with tunable properties. Such alloy material systems also provide advantages in comparison to traditional synthetic polymers due to the materials biodegradability, biocompatibility, and tenability in the body. This article used the protein blends of wild tussah silk (Antheraea pernyi) and domestic mulberry silk (Bombyx mori) as an example to provide useful protocols regarding these topics, including how to predict protein-protein interactions by computational methods, how to produce protein alloy solutions, how to verify alloy systems by thermal analysis, and how to fabricate variable alloy materials including optical materials with diffraction gratings, electric materials with circuits coatings, and pharmaceutical materials for drug release and delivery. These methods can provide important information for designing the next generation multifunctional biomaterials based on different protein alloys.

Blending is an efficient approach to generate biomaterials with a broad range of properties and combined features. By predicting the molecular interactions between different natural silk proteins, new silk-silk protein alloy platforms with tunable mechanical resiliency, electrical response, optical transparency, chemical processability, biodegradability, or thermal stability can be designed.

עיצוב פרוטאין משי משי חומרי סגסוגת עבור יישומים ביו

Fibrous proteins display different sequences and structures that have been used for various applications in biomedical fields such as biosensors, ...

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness and low bioactivity of metals. In this study, we have developed a new method towards fabricating a new type of bioactive and mechanically reliable porous metal scaffolds-densified porous Ti scaffolds. The method consists of two fabrication processes, 1) the fabrication of porous Ti scaffolds by dynamic freeze casting, and 2) coating and densification of the porous scaffolds. The dynamic freeze casting method to fabricate porous Ti scaffolds allowed the densification of porous scaffolds by minimizing the chemical contamination and structural defects. The densification process is distinctive for three reasons. First, the densification process is simple, because it requires a control of only one parameter (degree of densification). Second, it is effective, as it achieves mechanical enhancement and sustainable release of biomolecules from porous scaffolds. Third, it has broad applications, as it is also applicable to the fabrication of functionally graded porous scaffolds by spatially varied strain during densification.

Bioactive and mechanically reliable metal scaffolds have been fabricated through a method which consists of two processes, dynamic freeze casting for the fabrication of porous Ti, and coating and densification of the Ti scaffolds. The densification process is simple, effective and applicable to the fabrication of functionally graded scaffolds.

המצאה של מכאני מתכוונן ויו מתכת פיגומים עבור יישומים ביו

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness ...

Fabricating Cotton Analytical Devices

A robust, low-cost analytical device should be user-friendly, rapid, and affordable. Such devices should also be able to operate with scarce samples and provide information for follow-up treatment. Here, we demonstrate the development of a cotton-based urinalysis (i.e., nitrite, total protein, and urobilinogen assays) analytical device that employs a lateral flow-based format, and is inexpensive, easily fabricated, rapid, and can be used to conduct multiple tests without cross-contamination worries. Cotton is composed of cellulose fibers with natural absorptive properties that can be leveraged for flow-based analysis. The simple but elegant fabrication process of our cotton-based analytical device is described in this study. The arrangement of the cotton structure and test pad takes advantage of the hydrophobicity and absorptive strength of each material. Because of these physical characteristics, colorimetric results can persistently adhere to the test pad. This device enables physicians to receive clinical information in a timely manner and shows great potential as a tool for early intervention.

To investigate simple fabrication approaches for multiple assay needs, we created a fluid-absorbing channel system made of cotton material. This device was used to establish a multiple detection platform, and solve contamination issues that commonly affect lateral flow-based biomedical devices, for clinical urinalysis of nitrite, total protein, and urobilinogen.

בודה כותנה התקנים אנליטית

A robust, low-cost analytical device should be user-friendly, rapid, and affordable. Such devices should also be able to operate with scarce samples and ...

The Synthesis of RGD-functionalized Hydrogels as a Tool for Therapeutic Applications

The use of polymers as biomaterials has provided significant advantages in therapeutic applications. In particular, the possibility to modify and functionalize polymer chains with compounds that are able to improve biocompatibility, mechanical properties, or cell viability allows the design of novel materials to meet new challenges in the biomedical field. With the polymer functionalization strategies, click chemistry is a powerful tool to improve cell-compatibility and drug delivery properties of polymeric devices. Similarly, the fundamental need of biomedicine to use sterile tools to avoid potential adverse-side effects, such as toxicity or contamination of the biological environment, gives rise to increasing interest in the microwave-assisted strategy.
The combination of click chemistry and the microwave-assisted method is suitable to produce biocompatible hydrogels with desired functionalities and improved performances in biomedical applications. This work aims to synthesize RGD-functionalized hydrogels. RGD (arginylglycylaspartic acid) is a tripeptide that can mimic cell adhesion proteins and bind to cell-surface receptors, creating a hospitable microenvironment for cells within the 3D polymeric network of the hydrogels. RGD functionalization occurs through Huisgen 1,3-dipolar cycloaddition. Some PAA carboxyl groups are modified with an alkyne moiety, whereas RGD is functionalized with azido acid as the terminal residue of the peptide sequence. Finally, both products are used in a copper catalyzed click reaction to permanently link the peptide to PAA. This modified polymer is used with carbomer, agarose and polyethylene glycol (PEG) to synthesize a hydrogel matrix. The 3D structure is formed due to an esterification reaction involving carboxyl groups from PAA and carbomer and hydroxyl groups from agarose and PEG through microwave-assisted polycondensation. The efficiency of the gelation mechanism ensures a high degree of RGD functionalization. In addition, the procedure to load therapeutic compounds or biological tools within this functionalized network is very simple and reproducible.

We present a protocol for the synthesis of RGD-functionalized hydrogels as devices for cell and drug delivery. The procedure involves copper catalyzed alkyne-azide cycloaddition (CuAAC) between alkyne-modified polyacrylic acid (PAA) and a RGD-azide derivative. The hydrogels are formed using microwave-assisted polycondensation and their physicochemical properties are investigated.

הסינתזה של RGD פונקציונלית הידרוג ככלי יישומים טיפוליים

The use of polymers as biomaterials has provided significant advantages in therapeutic applications. In particular, the possibility to modify and ...

Light-mediated Formation and Patterning of Hydrogels for Cell Culture Applications

Click chemistries have been investigated for use in numerous biomaterials applications, including drug delivery, tissue engineering, and cell culture. In particular, light-mediated click reactions, such as photoinitiated thiol&#8722;ene and thiol&#8722;yne reactions, afford spatiotemporal control over material properties and allow the design of systems with a high degree of user-directed property control. Fabrication and modification of hydrogel-based biomaterials using the precision afforded by light and the versatility offered by these thiol&#8722;X photoclick chemistries are of growing interest, particularly for the culture of cells within well-defined, biomimetic microenvironments. Here, we describe methods for the photoencapsulation of cells and subsequent photopatterning of biochemical cues within hydrogel matrices using versatile and modular building blocks polymerized by a thiol&#8722;ene photoclick reaction. Specifically, an approach is presented for constructing hydrogels from allyloxycarbonyl (Alloc)-functionalized peptide crosslinks and pendant peptide moieties and thiol-functionalized poly(ethylene glycol) (PEG) that rapidly polymerize in the presence of lithium acylphosphinate photoinitiator and cytocompatible doses of long wavelength ultraviolet (UV) light. Facile techniques to visualize photopatterning and quantify the concentration of peptides added are described. Additionally, methods are established for encapsulating cells, specifically human mesenchymal stem cells, and determining their viability and activity. While the formation and initial patterning of thiol-alloc hydrogels are shown here, these techniques broadly may be applied to a number of other light and radical-initiated material systems (e.g., thiol-norbornene, thiol-acrylate) to generate patterned substrates.

We describe a sequential process for light-mediated formation and subsequent biochemical patterning of synthetic hydrogel matrices for three-dimensional cell culture applications. The construction and modification of hydrogels with cytocompatible photoclick chemistry is demonstrated. Additionally, facile techniques to quantify and observe patterns and determine cell viability within these hydrogels are presented.

אור בתיווך גיבוש דפוסים של הידרוג עבור יישומי תרבית תאים

Click chemistries have been investigated for use in numerous biomaterials applications, including drug delivery, tissue engineering, and cell culture. In ...

Extraction of Plant-based Capsules for Microencapsulation Applications

Microcapsules derived from plant-based spores or pollen provide a robust platform for a diverse range of microencapsulation applications. Sporopollenin exine capsules (SECs) are obtained when spores or pollen are processed so as to remove the internal sporoplasmic contents. The resulting hollow microcapsules exhibit a high degree of micromeritic uniformity and retain intricate microstructural features related to the particular plant species. Herein, we demonstrate a streamlined process for the production of SECs from Lycopodium clavatum spores and for the loading of hydrophilic compounds into these SECs. The current SEC isolation procedure has been recently optimized to significantly reduce the processing requirements which are conventionally used in SEC isolation, and to ensure the production of intact microcapsules. Natural L. clavatum spores are defatted with acetone, treated with phosphoric acid, and extensively washed to remove sporoplasmic contents. After acetone defatting, a single processing step using 85% phosphoric acid has been shown to remove all sporoplasmic contents. By limiting the acid processing time to 30 hr, it is possible to isolate clean SECs and avoid SEC fracturing, which has been shown to occur with prolonged processing time. Extensive washing with water, dilute acids, dilute bases, and solvents ensures that all sporoplasmic material and chemical residues are adequately removed. The vacuum loading technique is utilized to load a model protein (Bovine Serum Albumin) as a representative hydrophilic compound. Vacuum loading provides a simple technique to load various compounds without the need for harsh solvents or undesirable chemicals which are often required in other microencapsulation protocols. Based on these isolation and loading protocols, SECs provide a promising material for use in a diverse range of microencapsulation applications, such as, therapeutics, foods, cosmetics, and personal care products.

This protocol/manuscript describes a streamlined process for the production of sporopollenin exine capsules (SECs) from Lycopodium clavatum spores and for the loading of hydrophilic compounds into these SECs.

הפקת קפסולות צמחית עבור יישומי מיקרואנקפסולציה

Microcapsules derived from plant-based spores or pollen provide a robust platform for a diverse range of microencapsulation applications. Sporopollenin ...

Rapid Mix Preparation of Bioinspired Nanoscale Hydroxyapatite for Biomedical Applications

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest regarding the use of bioinspired nanoscale hydroxyapatite (nHA). However, biological apatite is known to be calcium-deficient and carbonate-substituted with a nanoscale platelet-like morphology. Bioinspired nHA has the potential to stimulate optimal bone tissue regeneration due to its similarity to bone and tooth enamel mineral. Many of the methods currently used to fabricate nHA both in the laboratory and commercially, involve lengthy processes and complex equipment. Therefore, the aim of this study was to develop a rapid and reliable method to prepare high quality bioinspired nHA. The rapid mixing method developed was based upon an acid-base reaction involving calcium hydroxide and phosphoric acid. Briefly, a phosphoric acid solution was poured into a calcium hydroxide solution followed by stirring, washing and drying stages. Part of the batch was sintered at 1,000 &#176;C for 2 h in order to investigate the products&#39; high temperature stability. X-ray diffraction analysis showed the successful formation of HA, which showed thermal decomposition to &#946;-tricalcium phosphate after high temperature processing, which is typical for calcium-deficient HA. Fourier transform infrared spectroscopy showed the presence of carbonate groups in the precipitated product. The nHA particles had a low aspect ratio with approximate dimensions of 50 x 30 nm, close to the dimensions of biological apatite. The material was also calcium deficient with a Ca:P molar ratio of 1.63, which like biological apatite is lower than the stoichiometric HA ratio of 1.67. This new method is therefore a reliable and far more convenient process for the manufacture of bioinspired nHA, overcoming the need for lengthy titrations and complex equipment. The resulting bioinspired HA product is suitable for use in a wide variety of medical and consumer health applications.

This paper describes a novel method for the rapid manufacture of high quality bioinspired nanoscale hydroxyapatite. This biomaterial is of great significance in the manufacture of a wide range of innovative medical devices for clinical applications in orthopedics, craniofacial surgery and dentistry.

הכנה מהירה מיקס של Bioinspired ננומטריים Hydroxyapatite עבור יישומים ביו-רפואיים

Hydroxyapatite (HA) has been widely used as a medical ceramic due to its good biocompatibility and osteoconductivity. Recently there has been interest ...

Melt Electrospinning Writing of Three-dimensional Poly(&#949;-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology with great potential for biomedical applications. The technique facilitates the direct deposition of biocompatible polymer fibers to fabricate well-ordered scaffolds in the sub-micron to micro scale range. The establishment of a stable, viscoelastic, polymer jet between a spinneret and a collector is achieved using an applied voltage and can be direct-written. A significant benefit of a typical porous scaffold is a high surface-to-volume ratio which provides increased effective adhesion sites for cell attachment and growth. Controlling the printing process by fine-tuning the system parameters enables high reproducibility in the quality of the printed scaffolds. It also provides a flexible manufacturing platform for users to tailor the morphological structures of the scaffolds to their specific requirements. For this purpose, we present a protocol to obtain different fiber diameters using melt electrospinning writing (MEW) with a guided amendment of the parameters, including flow rate, voltage and collection speed. Furthermore, we demonstrate how to optimize the jet, discuss often experienced technical challenges, explain troubleshooting techniques and showcase a wide range of printable scaffold architectures.

This protocol serves as a comprehensive guideline to fabricate scaffolds via electrospinning with polymer melts in a direct writing mode. We systematically outline the process and define the appropriate parameter settings for achieving targeted scaffold architectures.

להמיס Electrospinning הכתיבה של פיגומים Poly(ε-caprolactone) תלת מימדי עם מורפולוגיות לשליטה עבור יישומי הנדסת רקמות

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology ...

Three-dimensional Printing of Thermoplastic Materials to Create Automated Syringe Pumps with Feedback Control for Microfluidic Applications

Microfluidics has become a critical tool in research across the biological, chemical, and physical sciences. One important component of microfluidic experimentation is a stable fluid handling system capable of accurately providing an inlet flow rate or inlet pressure. Here, we have developed a syringe pump system capable of controlling and regulating the inlet fluid pressure delivered to a microfluidic device. This system was designed using low-cost materials and additive manufacturing principles, leveraging three-dimensional (3D) printing of thermoplastic materials and off-the-shelf components whenever possible. This system is composed of three main components: a syringe pump, a pressure transducer, and a programmable microcontroller. Within this paper, we detail a set of protocols for fabricating, assembling, and programming this syringe pump system. Furthermore, we have included representative results that demonstrate high-fidelity, feedback control of inlet pressure using this system. We expect this protocol will allow researchers to fabricate low-cost syringe pump systems, lowering the entry barrier for the use of microfluidics in biomedical, chemical, and materials research.

Here we present a protocol to construct a pressure-controlled syringe pump to be used in microfluidic applications. This syringe pump is made from an&#160;additively manufactured body, off-the-shelf hardware, and open-source electronics. The resulting system is low-cost, straightforward to build, and delivers well-regulated fluid flow to enable rapid microfluidic research.

תלת מימדי הדפסה של חומרים תרמופלסטיים כדי ליצור אוטומטית משאבות מזרק עם בקרת משוב עבור יישומים Microfluidic

Microfluidics has become a critical tool in research across the biological, chemical, and physical sciences. One important component of microfluidic ...