微血管内皮生理E -选择素介导白细胞滚动分析

This video demonstrates parallel plate flow chamber analysis for examining the factors that trigger leukocyte rolling on endothelial cell surfaces. Endothelial cell monolayers are stimulated with the pro-inflammatory cytokine IL one beta to upregulate S selectin expression. The parallel plate flow chamber is then placed over the endothelial cells and S selectin positive leukocytes are infused over the monolayer.

The cellular interactions in the chamber are thus imparted with sheer stress that is similar to that in post capillary es leukocyte adhesion. Rolling events are captured and enumerated using NIS elements and assay for E select independence. Hi, I am George Weis in the laboratory of Dr.Charles de Nitro in the Department of Dermatology at Brigman Women's Hospital, Harvard Medical School.

Today we'll show you a procedure for analyzing the role of e selectin, E selectin ligands in the adhesion of human leukocytes to human bone marrow endothelial cells under physiologic blood flow conditions. We use this procedure in our laboratory to study the role of cell surface molecules that initiate the adhesion of white blood cells or metastatic cancer cells to endothelial cells, which line the inner surface of blood vessels. This adhesive event is characterized by a rolling behavior like a bowling ball rolling down a lane.

So let's get started. The first step in this procedure is preparing the endothelial cells that will line the flow chamber. This protocol uses H-B-M-E-C 60 cells derived from human bone marrow.

Microvasculature culture dishes should be pre-coated with fibronectin to prepare these incubate 35 milliliter tissue culture dishes with PBS containing 20 micrograms per mil of fibronectin. These may be incubated overnight at four degrees Celsius or for three hours at 37 degrees Celsius. Suspend H-B-M-E-C 60 cells in medium 1 99 and seed at 10 to the fifth cells per dish, grow the cultures to over 90%confluence.

This will take about two days to upregulate e select and expression aspirate the growth medium and add fresh medium with 50 nanograms per mil of IL one beta incubate for four to six hours. Cell monolayers are now ready for the flow chamber assay. Additional plates of H-B-M-E-C 60 cells can be stimulated with IL one beta and treated with neutralizing anti-human e selectin antibody at 20 micrograms per mil for one hour at 37 degrees Celsius.

This will control for functional expression of e selectin. Next, prepare the e selectin positive leukocytes. These are KG one a human hematopoietic progenitor cells.

These are grown in suspension to confluence or tend to the six cells per mil in RPMI 1640. The KG one A cells may be pipetted directly from the culture and counted on a hemo cytometer. Resus suspend the cells at 10 to the six cells per mil in HBSS with 10 millimolar hep or HH buffer that contains two millimolar calcium chloride.

Store the cells on ice until they are assay. The next steps involve preparing the microscope, the parallel plate flow chamber and the syringe pump. For the assay turn on the microscope and the syringe pump.

Select the 10 x objective on the microscope. Place a 50 milliliter conical tube in the holder and fill it with HH buffer with two millimolar calcium chloride. Then place five milliliter plastic test tubes in the holder below.

Next, put a 60 milliliter syringe in the syringe pump. Make sure that both the plunger and the body of the syringe are secure. Attach a three-way stop cock to the end of the 60 mil syringe and then a five mil syringe to the three-way stop cock.

Place the parallel flow chamber apparatus on the microscope stage with input tube on the right output tube on the left and vacuum tube in the back. After the tubing is connected to the vacuum, open the air valve to allow the parallel plate apparatus to adhere to the stage. This will test if the vacuum skirt on the flow chamber is airtight.

When the seal is affirmed, turn off the air valve. Now attach the output tubing line to the three-way stop cock that is already connected to the syringe. The apparatus is now ready to place over the H-B-M-E-C 60 cells.

Turn on the vacuum gently lower the flow chamber apparatus onto the plate and allow the apparatus to suction down. There should be no sounds of air escaping and at this point you may need to apply pressure to the chamber to compress the rubber gasket. Once the vacuum has been established, place the input tube into the 50 milliliter conical tube.

Open the three-way stop cock to the 60 mil syringe and place the pump in pump mode to remove air from the lines without lifting the cells on the plate. Use the syringe pump set at two mils per minute to fill the intake tube. Then quickly set to 0.5 mils per minute.

Just before the fluid reaches the apparatus, it is critical to prime the setup carefully and avoid air bubbles, which will lift the monolayer from the plate. Once fluid moves into the 60 mil syringe, the flow chamber and the syringe pump is primed. Now, secure the flow in chamber to the stage with a piece of tape over each of the input, output and vacuum lines.

This ensures that the field of view remains constant when visualizing and collecting the data. The flow chamber is now ready for use. These steps should be repeated for each cell input run and for each new plate.

To capture Lucas site rolling events, open NIS elements on the desktop, press the play icon for a live image. Auto exposure will allow you to see the plate and to focus the image. Be sure the microscope is focused properly on the cell monolayer by adjusting focus manually on the microscope.

Once the image is in focus, reset the exposure to one frame per second and adjust the light on the microscope. The image should appear on the computer and should no longer be visible in the microscope. The light histogram can then be adjusted To remove background exposure or to improve cell clarity, click on two by two bin or live bin to obtain an image that is ideal for movie capture.

Click on macro on the menu bar and select right to port select port com three and open. This opens the port to coordinate with the syringe pump. The flow chamber is now ready to be infused with KG one A cells pipette one mil of KG one A S suspension into the five mil test tube near the input tubing line.

Then place the input line to the bottom of the test tube. Go to the menu bar and click on capture and time lapse acquisition. Select the protocol lasting 210 seconds.

This is the length of the program for rolling on H-B-M-E-C 60 cells. Each phase is programmed to take a picture every second for the duration of the pump protocol. It is also set up to send a command through the comm three port to start the pump.

Set the syringe pump to program mode, which allows for manual programming of specific flow rates. This will determine the sheer stress levels within the chamber and dictate KG one A cell interactions over the H-B-M-E-C 60 cells. Settings for these interactions are 4.2 dines per centimeter squared for 45 seconds.

Point three dines per centimeter squared for 60 seconds and step aways increases every 15 seconds to a maximum of 4.2 dines per centimeter squared. The microscope and computer are now ready to capture time lapse photography. Press start run on the computer to begin acquiring data while running the program.

Be sure to add media to the tube containing KG one A cells in order to keep the input output tubing full of medium and to prevent air bubbles from entering the system. If the time lapse is interrupted, the pump will not stop on its own and must be reset. Press cancel to return to the live image.

An unstimulated endothelial cell monolayer serves as the negative control for this experiment. To do this infuse KG one A leukocytes into the flow chamber over untreated H-B-M-E-C 60 cells to control for e select independence, stimulate the endothelial cell mono layer with IL one beta and infuse the leukocytes over these cells to further control for eect independence. Treat H-B-M-E-C 60 cells with IL one beta and then with anti-human S selectin antibody.

Then analyze leukocyte rolling events on these cells. Cell rolling is not only determined by S selectin, but also by slic acid residues on the leukocyte cell surface. To show this, digest the KG one A cells with 0.1 units per mil neuraminidase for one hour at 37 degrees Celsius.

Then analyze the rolling events over stimulated H-B-M-E-C 60 cells. Glycoproteins on the leukocyte surface are also important for cell rolling. This can be demonstrated by treating the KG one A cells with 0.2 units per mil broma lane for one hour at 37 degrees Celsius, and then infusing them into the flow chamber.

After the time sequence is acquired, the data are ready for analysis. Save the data and go to the measure tab on the menu bar and select defined threshold. Move the bars so the desired cells are colored in red, select all images and then okay, the entire time-lapse sequence should now be modified with visible red rolling cells.

Go to measure and select restrictions. This allows the user to exclude threshold objects that do not represent rolling cells. These are primarily background created by the H-B-M-E-C 60 monolayer select area and input minimum and maximum values, which are ideal for the rolling leukocytes.

Repeat this step for elongation and circularity Select measure and then select create binary using restrictions. The same restriction values, which were set in the previous step, will now be used to optimize the NIS elements software for recognizing rolling leukocytes on the endothelial cell monolayer. Go back to measure select field data and then select reset data.

Close the menu, return to measure and select scan field, open measure field data, and select number or objects. Then select all fields and export the data to Microsoft Excel. Finally, select clear data.

NIS elements is now ready for more data collection. These representative data show how leukocyte endothelial cell interactions respond to physiologic sheer stress, specifically testing the role of the adhesive ligand. E selectin.

Robust leukocyte rolling occurs when endothelial cells are pre stimulated with IL one beta. When comparing this result with the unstimulated control, it is clear that cell rolling is dependent on cytokine stimulation. By treating the H-B-M-E-C 60 cells with IL one beta and then with anti-human E selectin antibody, it becomes clear that the cell rolling depends specifically on e selectin.

This assay can be used to test other parameters as well. For example, when stimulated cells are pretreated with a sase or with brolin, the results are less robust. These data highlight the importance of terminal slic acid residues as well as cell surface glycoproteins.

For S selectin ligand activity, We've just shown you how to analyze e selectin based adhesive interactions between leukocytes and endothelial cells under conditions that mimic forces present in a post capillary venial, the region of circulation system where leukocytes leave the blood and enter tissues. When doing this procedure, it's important to remember to use the appropriate blocking antibody or enzymatic treatment control to validate the necessity of the respective selectin and its ligand in this assay system. So that's it.

Thanks for watching and good luck with your experiments.